:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

BDVT's BroDozzer gets compound twin turbos!... (link)

Pages: [1]   Go Down

Author Topic: Help with welding SS mani with mig?  (Read 6912 times)

CO_CReX

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
Help with welding SS mani with mig?
« on: February 28, 2010, 02:08:17 PM »
Whats up guys! I have a question, I did a budget turbo build and used an Stainless Steel ebay manifold, after about 8 months now it is starting to crack... go figure, I knew this was going to happen eventually but I figured I would have found someone with a tig or might have purchased a tig on my own by now...  That is not the case unfortunately.  I have a little Lincoln weldpack 110v mig, Is there any type of wire I can use to weld this stainless steel myself?  I can't listen to this horrible exhaust leak anymore and it is definately hurting spool time.  Also I am not using any shielding gas at the moment, am I going to need some?  Im honestly dont care if it looks like shit when Im done just as long as it seals the crack and doesn't leak anymore...




Thanks for any help guys!
Logged

bigwig

  • Guest
Re: Help with welding SS mani with mig?
« Reply #1 on: February 28, 2010, 02:48:36 PM »
308 or 309 SS wire with 100% argon is what you want.  Grind off that BS coating and weld away.

Where do you live?  You may have a member local to you that can fix it with a TIG if you like bling bling welds.
Logged

CO_CReX

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
Re: Help with welding SS mani with mig?
« Reply #2 on: February 28, 2010, 02:59:23 PM »
Hey thanks!  I live in Colorado Springs CO


Can I weld this without any gas?  or do I have to have gas to do this?
Logged

SOHCKLR657

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 420
  • D-Series 10LBS Will Turn Ya Out!
Re: Help with welding SS mani with mig?
« Reply #3 on: February 28, 2010, 03:13:01 PM »
I live in Englewood but my buddy and I own a weld/fab shop, he can fix that up for ya like a jiff, we've welded 3 of these manis up and our welds never broke again but the ching chong meow ones did, and yes you need ss wire and argon, or you can try to birdshit it and hope like hell that when you look at it, it does'nt fall off :P...
Matt
« Last Edit: February 28, 2010, 03:14:48 PM by SOHCKLR657 »
Logged

Holy mother of all that is cheesy and burgery, Sohclikr... YOU ARE A FAT FUCK YOU FAT FUCK.

 88 4DR DX... You Will See... D15B Powered Where'#39#39s My Powder, Come On Wit It! http://www.quizmasters.biz/Pub%20Genius/Mr_Men/Characters/Mr%20Rude_01.png

Foowee

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1816
Re: Help with welding SS mani with mig?
« Reply #4 on: February 28, 2010, 03:16:05 PM »
There is fluxcore stainless wire out there.  I haven't used it though.

http://weldingsupply.securesites.com/cgi-bin/spider.pl?308LFCF5||1|700|

smallest I can find is a 10lb. spool...  $80+shipping is a bit much for something you'll probably never use again...
Logged

hotrex

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 13021
  • rough riding niggas since 2002
Re: Help with welding SS mani with mig?
« Reply #5 on: February 28, 2010, 05:19:37 PM »
dude just blaze it with whatev er u have available.  fixing that mani is like giving giving a cancer aids patient kemo. u put the first piece of cancer into remission but its only a matter of time before the aids infests it totally and it dies. 
Logged
1. nbspnbsp choda nbspnbsp 584 up, 134 down
 area between your bag and your asshole
Johnny bliss'#039#039s mom really worked my choda yesterday, I wont be able to ride my bike for a week

Hotrodlincoln

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1767
Re: Help with welding SS mani with mig?
« Reply #6 on: February 28, 2010, 06:56:11 PM »
Quote from: hotrex on February 28, 2010, 05:19:37 PM
dude just blaze it with whatev er u have available.  fixing that mani is like giving giving a cancer aids patient kemo. u put the first piece of cancer into remission but its only a matter of time before the aids infests it totally and it dies. 
No shit! just weld it with flux core.
Logged
kill yourself piss face

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8950
  • Go outside and play hide and go fuckyourself
Re: Help with welding SS mani with mig?
« Reply #7 on: February 28, 2010, 06:58:32 PM »
Quote from: hotrex on February 28, 2010, 05:19:37 PM
dude just blaze it with whatev er u have available.  fixing that mani is like giving giving a cancer aids patient kemo. u put the first piece of cancer into remission but its only a matter of time before the aids infests it totally and it dies. 


LOLOL
Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Help with welding SS mani with mig?
« Reply #8 on: February 28, 2010, 09:36:28 PM »
B or d?

Just buy my cdm mani and call it good for another 8 months
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

CO_CReX

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
Re: Help with welding SS mani with mig?
« Reply #9 on: February 28, 2010, 10:35:49 PM »
Its for an H

Thanks for all the input guys!  O0
Logged

weirtech

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2341
    • Weir Technologies Inc.
Re: Help with welding SS mani with mig?
« Reply #10 on: February 28, 2010, 10:38:19 PM »
drill holes in the ends of the crack before you weld it so it doesn't spread further.
Logged
Pages: [1]   Go Up
« previous next »