Topic: WOW thats ghetto (Read 8848 times)

Emperor · « **on:** February 18, 2010, 03:44:37 PM »

http://www.rufusthedoofus.com/no-pressure-yet/

i wonder how good this flow^^

Robb · « **Reply #1 on:** February 18, 2010, 03:49:30 PM »

Your a tard. That manifold is more than what is needed to boost that DIESEL 6 cylinder. Flow? You have no clue what your talking about.

My concern is that his CDM turbo is too small.

marcj · « **Reply #2 on:** February 18, 2010, 03:59:07 PM »

ghetto? that's a quality manifold, sir.. needs more holset

Emperor · « **Reply #3 on:** February 18, 2010, 04:00:29 PM »

LOL i guess

Tard is like saying Hello in RHMT^^

bigwig · « **Reply #4 on:** February 18, 2010, 04:33:47 PM »

You better bring weaker shit than that if you want to criticize someone for building something themselves. As far as I can see, they used decent materials, they built it fairly well, and it was welded fairly well. Is the design optimized? No. Would it probably be better with round tube vs square? Probably. Either way, it's a log manifold, and flow means dick, so I give the guy a B+.

SloS13 · « **Reply #5 on:** February 18, 2010, 04:34:43 PM »

Wednesday, you.

Budget_SI · « **Reply #6 on:** February 18, 2010, 04:38:46 PM »

badass squarefold!

brine04 · « **Reply #7 on:** February 18, 2010, 05:36:54 PM »

You've obviously never seen an oem 6bt manifold. It's half that size.

900s · « **Reply #8 on:** February 18, 2010, 07:18:34 PM »

Quote from: Budget_SI on February 18, 2010, 04:38:46 PM

badass squarefold!

This. Mild steel and fluxcore would make it better though.

Whitey · « **Reply #9 on:** February 18, 2010, 07:28:26 PM »

Nothing ghetto about that.

Go fuck yourself

glustic · « **Reply #10 on:** February 18, 2010, 07:46:13 PM »

Get the fuck out of here. If you think that's ghetto you would be blown away by the shitn we pull off. But may I say your mothers snatch is quite fine

7808 · « **Reply #11 on:** February 19, 2010, 07:49:25 PM »

that manifold is mad decent. you obviously have not spent much time here (and probly shouldnt) or you would never question somthing like that.

ive used square tube on manifolds on cars that would tow yours while beating it in a race with an identical car to yours

t_cel_t · « **Reply #12 on:** February 19, 2010, 08:22:29 PM »

fucking awesome
like its been, said have you ever even seen the stock mani on some of these motors?

SgtB · « **Reply #13 on:** February 19, 2010, 09:07:48 PM »

Laser cut and decent welds with no rust. Where's the ghetto?

onlyflash944 · « **Reply #14 on:** February 19, 2010, 10:18:25 PM »

Quote from: SgtB on February 19, 2010, 09:07:48 PM

Laser cut and decent welds with no rust. Where's the ghetto?

haha, yea sch40 threaded pipe manifold is starting to rust a bit

TTC · « **Reply #15 on:** February 19, 2010, 10:26:13 PM »

Squarefold manis go waaay back.

j.h.christ · « **Reply #16 on:** February 19, 2010, 11:02:44 PM »

that thing is going to be able to tow a house

turbob16hatch · « **Reply #17 on:** February 19, 2010, 11:13:27 PM »

eh, using tubes larger then the port on the flange then cutting a hole the size of the port in the "log" section, is begging for failure.

But that is bad rhmt.

SgtB · « **Reply #18 on:** February 19, 2010, 11:36:06 PM »

Didn't notice that. $:-\$

Pootie · « **Reply #19 on:** February 19, 2010, 11:49:33 PM »

that manifold is pimppppp!!

d112crzy · « **Reply #20 on:** February 19, 2010, 11:50:39 PM »

Quote from: SloS13 on February 18, 2010, 04:34:43 PM

Wednesday, you.

Corey · « **Reply #21 on:** February 20, 2010, 03:00:32 AM »

Quote from: turbob16hatch on February 19, 2010, 11:13:27 PM

eh, using tubes larger then the port on the flange then cutting a hole the size of the port in the "log" section, is begging for failure.

But that is bad rhmt.

im wondering why he didnt get some stainless round pipe. would have been just as easy and worked twice as well.

HiProfile · « **Reply #22 on:** February 21, 2010, 03:57:06 PM »

Quote from: TTC on February 19, 2010, 10:26:13 PM

Squarefold manis go waaay back.

That's what I thouht of when I saw this. That shit was tits.

Jorsher · « **Reply #23 on:** February 21, 2010, 09:20:38 PM »

lol, he didn't like whoever-posted-from-rhmt's opinion

turbob16hatch · « **Reply #24 on:** February 21, 2010, 09:50:51 PM »

Thats because he thinks he built something correctly. WRONG.....

Is it me or did i never hear the turbo make any noise when he was reving it up.

colt45 · « **Reply #25 on:** February 22, 2010, 02:47:40 AM »

constant pressure is good

skaterdudz02 · « **Reply #26 on:** March 05, 2010, 09:25:13 PM »

I think he needs three turbos on there to actually get that thing moving.

2slow · « **Reply #27 on:** March 06, 2010, 06:09:56 AM »

Quote from: skaterdudz02 on March 05, 2010, 09:25:13 PM

I think he needs three turbos on there to actually get that thing moving.

and i think you are a homo.

News:

Author Topic: WOW thats ghetto (Read 8848 times)

bigwig