Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jagojon3]

Anybody know where to get one for a decent price? I tried alternative methods and it's not happening, I am sad that my pipe wrench didn't work.

[92CXyD]

What part are you adjusting?  toe?

I just replaced all my bushings, and tie rods (inner and outer).

All I needed was some open end wrenches to adjust the toe in out.

[jagojon3]

No

Adjusting the tension/distance between the rack and pinion gear. There is a large hex wrench to loosen a lock nut, this is the tool I need.

[crttaz]

don't mess with it.

Most of the wear is on center, by tightening it it will end up binding at 1/2 lock.

The nut is 40mm, 1 9/16" might work.

[snm95ls]

I bought a big adjustable wrench when I rebuilt the rack in my old CRX.

I had no issues with binding on my 250K+ mile steering rack after adjustment.