Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[chris]

http://www.amazon.com/Hakko-Desoldering-Kit-808-Gun/dp/B000ARPULW


After years of using braid and doing 3 ecu's this weekend I figured Im done with braid. Anything else I should buy with the link above. Ill be using it just for honda ecu boards.

[Minor Threat]

I use the 808 gun, works awesome, never looked back.

[lilpooh21186]

teh sex i can do an ecu in 20 min with my 808 reliable get the kit with the hot glove and all the bells and whistles i think min was in the 200 area but payed for its self the 1st week end i had it.

[t_cel_t]

on a side note, you can get brass or stainless scour pads from the supermarket and they make awesome tip cleaners.

like this
http://www.amazon.com/Hakko-Cleaner-599B-02-Non-Corrosive-Needed/dp/B000PDQORU/ref=pd_cp_hi_2

[Joseph Davis]

http://store.sra-solder.com/product.php?xProd=6369&xSec=22

http://store.sra-solder.com/product.php?xProd=6417&xSec=22

[BangBusMaster]

Do you like those?

[Joseph Davis]

Yes.  They are supposed to be backdoored Hakkos, in the same manner that BLOX found the china company manufacturing older Skank9 gear and undercut Skank with it.

I've had this for around a year now, I have used it a lot:  http://store.sra-solder.com/product.php/6267/0

[SgtB]

on a side note, you can get brass or stainless scour pads from the supermarket and they make awesome tip cleaners.

like this
http://www.amazon.com/Hakko-Cleaner-599B-02-Non-Corrosive-Needed/dp/B000PDQORU/ref=pd_cp_hi_2

The first time I used one of those I was pissed I had ever used a wet sponge. It cleans everything off the tip and makes it look like you just tinned it. I have a cup with really fine, long brass shavings in it. Works awesome.

I've used the self vacuuming gun before. It was great for bigger stuff. The tips can be had in smaller sizes, but you have to be fast and careful on smaller items. If you don't have a station handy, you can make a air damn around the part with aluminum foil and use a heat gun. Liquify solder, smack upside down on table. A little braid work cleans the mess up.

[clwtwizted]

Straight Iron and a tooth pick. :yes: Simple and quick.

[lilpooh21186]

Craig moates how to chip obd1 Honda ecu's on YouTube shows this cum guzler in action.

[ryan89crx]

The Moates vids make that Hakko look stupid easy

[chris]

The Moates vids make that Hakko look stupid easy

Thats because it is.

[Joseph Davis]

No it's not.  Ask Michael J. Fox - Michael's not stupid, but he can't use one.

[FreshDA9]

 

[onlyflash944]

those last two posts made me lol