Topic: finally a decent sohc cast mani with the wastegate in a non-retarded spot (Read 6890 times)

highroller54 · « **on:** April 22, 2012, 04:36:39 PM »

http://www.go-autoworks-store.com/gocairtuma.html

92CXyD · « **Reply #1 on:** April 22, 2012, 04:52:30 PM »

Not bad, on ebay http://www.ebay.com/itm/CIVIC-DEL-SOL-CRX-D15-D16-CAST-TURBO-MANIFOLD-EF-EG-EK-/251045082199?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a7373f457&vxp=mtr

It is little less than half of that price

highroller54 · « **Reply #2 on:** April 22, 2012, 05:49:54 PM »

even better, When I needed one for my z6 I could only find gay ones, but that was a few years ago.

tekno · « **Reply #3 on:** April 22, 2012, 06:28:21 PM »

yeah i have on of the ebay ones. Besides tons of shit inside it when i got it its decent casting.

Passenger · « **Reply #4 on:** April 22, 2012, 06:42:52 PM »

The wastegate port is not at all in the exhaust flow path, how is that not retarded?

1991civicsi · « **Reply #5 on:** April 22, 2012, 06:56:06 PM »

Quote from: Passenger on April 22, 2012, 06:42:52 PM

The wastegate port is not at all in the exhaust flow path, how is that not retarded?

At least the ones I had seen in comparison had the W/G placement right on one of the runners..

bigdaddyvtec · « **Reply #6 on:** April 22, 2012, 06:59:37 PM »

Quote from: Passenger on April 22, 2012, 06:42:52 PM

The wastegate port is not at all in the exhaust flow path, how is that not retarded?

Are you new? Have you not seen any of the older ones? This thing is MILES ahead of what there used to be at price point.

Nigger

highroller54 · « **Reply #7 on:** April 22, 2012, 07:51:34 PM »

Quote from: Passenger on April 22, 2012, 06:42:52 PM

The wastegate port is not at all in the exhaust flow path, how is that not retarded?

You do have a point, It should read a much less retarded spot

bouncinofftherevlimiter · « **Reply #8 on:** April 22, 2012, 08:13:07 PM »

What ever happened to the RHMT way and building your own mani, then you can prioritize WG mounting location....

Passenger · « **Reply #9 on:** April 22, 2012, 08:53:36 PM »

Quote from: bigdaddyvtec on April 22, 2012, 06:59:37 PM

Quote from: Passenger on April 22, 2012, 06:42:52 PM
The wastegate port is not at all in the exhaust flow path, how is that not retarded?

Are you new? Have you not seen any of the older ones? This thing is MILES ahead of what there used to be at price point.

No I haven't seen the older ones. If this thing is miles ahead I am assuming the old ones must have had the wastegate port running off one primary near the head or something? This manifolds wastegate placement is gay at best.

jabberwock · « **Reply #10 on:** April 22, 2012, 09:02:18 PM »

ya dig?

HiProfile · « **Reply #11 on:** April 23, 2012, 12:54:41 AM »

I bought one of those a few weeks ago, it's not bad besides the slightly offset flange holes. It seems they took a b-series BLOX, copied it into a CAD app, resized it in the CAD program, and changed the flange to a SOHC. Then made a mould and went from there.

As far as d-series, it offers one of the best WG placement. I plan on using it on my car and checking how it works to as low as 3psi.

tekno · « **Reply #12 on:** April 23, 2012, 12:32:20 PM »

not perfect but it will work with my ac and powersteering so it will do for 50$

ratcityrex · « **Reply #13 on:** April 23, 2012, 12:40:26 PM »

Fuck your cast manifold!! I made this a few years ago. It has good wg placment and its rhmt all the wway!

bigdaddyvtec · « **Reply #14 on:** April 23, 2012, 01:40:30 PM »

Stink trap FTW NIGGA!

flat_black · « **Reply #15 on:** April 23, 2012, 10:14:09 PM »

probably enough back pressure will be created that wastegate placement wont matter...

HiProfile · « **Reply #16 on:** April 24, 2012, 12:56:19 AM »

Yeah, sinktraps/elephants just don't flow for shit. 17psi only made 20whp more than 10psi. It was also 17psi with my 3" cutout open vs 10psi through a STOCK muffler. I'd have only made made more power if I put a one-way valve on the elephant manifold.

One thing about that cast manifold is the WG hole is tiny, maybe 32mm. It's tappered though, and enough material to make it >38mm. Not that 38mm WG's fire rings are even 38mm in diameter though...

SloS13 · « **Reply #17 on:** April 24, 2012, 01:59:56 PM »

GO-AUTOWORKS is good people

HiProfile · « **Reply #18 on:** April 24, 2012, 08:41:59 PM »

Shit $126?? I paid in the $50's for the EXACT same thing via that ebay tacotaco guy. The packaging was horrible and the $0.25 composite gasket was trashed, but it actually didn't loose any studs or nuts through the 3 giant holes in the box.

Oh well, I'm sure you'll get something for the extra money. I'll use the $70 difference to get some grade-8 studs, a few honda MLS exhaust gaskets, and beer.

tekno · « **Reply #19 on:** April 25, 2012, 04:11:21 AM »

yeah i got mine from tacotaco as well was missing all the hardware but i msg'd him and he sent me out 2 full sets of gaskets and hardware.

News:

Author Topic: finally a decent sohc cast mani with the wastegate in a non-retarded spot (Read 6890 times)