Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[marcj]

I decided to put my coupe on the road again instead of selling it. I'm joining the Air Force as an E-3 in acouple months, so I canceled the 240sx project until a later date.

got rid of my sinktrap, made a little money on the deal, and bought a log manifold from weirtech (aaron) for a what most people charge for material.


I have turned the compressor to the proper side. I was checking clearance for A/C compatible setup if I decided to go that route.


put a wastegate on. the only material available at the time was a mild steel elbow; I expect to get flamed for this.. eat a dick


just finished making the new charge pipe setup a few hours ago.
got the smaller intercooler for $20 from a local.

I'll get some better pics once it's out of the garage.. the lighting sucks in there.


interior shot.. nothing new aside from relocating the radio down low, electric oil press. gauge, PLX M300 on steering column and the GSR shifter knob.. finally got rid of that retarded acorn looking DC knob that came with the car 2 years ago

[marcj]

oh yeah, I tucked most of the passenger side.. haven't started on the driver side.

[marcj]

plans as of now are:
1.) getting the tune fixed since it was running like shit with my new 780cc's last time it was on the road
2.) finally putting my thermal 3" exhaust on
3.) making a cold intake for the turbo (IAT were super high before this revision)
4.) getting another dragger clutch from Mike since I sent the last one back 

[ApexSilver06MR]

plans as of now are:
1.) getting the tune fixed since it was running like shit with my new 780cc's last time it was on the road
2.) finally putting my thermal 3" exhaust on
3.) making a cold intake for the turbo (IAT were super high before this revision)
4.) getting another dragger clutch from Mike since I sent the last one back 

did you get that vtak solenoidz that i sent?

[Joseph Davis]

Marc just called me looking to sell this car, he's willing to make a deal so he doesn't have to part it out.

Bump for a good dude.

[marcj]

Marc just called me looking to sell this car, he's willing to make a deal so he doesn't have to part it out.

Bump for a good dude.

lol.. we are all sick of your lies and deceit baldnog!
all you ever do around here is contribute valuable information and out tune anyone else! 

did you get that vtak solenoidz that i sent?

yessir.. thanks!

[marcj]

[AJxr]

dude just tune it to 400hp and go run some 11s already

[Wicked]

nice manifold, I think the manifold, your tuerbo maybe to big, nice mang

[boosted 00 black si]

why did u go with a smaller fmic?

[marcj]

why did u go with a smaller fmic?

I sold my evo intercooler because it was a backdoor setup.. I plan on running A/C or a full size radiator if I end up moving somewhere with tolerable summer temperature (FL heat sucks). I will eventually get one of those bigger ebay coolers,  lik

[Joseph Davis]

Copycat

[boosted 00 black si]

how much power u shooting for??

i had that same fmic on my old ramhorn set up

[marcj]

400 wheel on 93

[marcj]

found the culprit of my laggy ass spool time..


put a 4 bar map sensor in my oem map housing.. $15 invested total


penis lover

[HiProfile]

put a 4 bar map sensor in my oem map housing.. $15 invested total

Fucking copy cat. Look back at my thread for how to 'rivet' the case halves back together. Also, it's important to leak test them in water, you'll see them leak before you hear them.


BTW does this mean the A/C sinktrap is out? I just got a whole bunch of turbo housings/chra's from my friend, and I only work 2 days this week.

[Lowerit]

Looks good, keep posting ... I wanna throw something on my Daily SIR B16 failboat this is good info.

[marcj]

Fucking copy cat. Look back at my thread for how to 'rivet' the case halves back together. Also, it's important to leak test them in water, you'll see them leak before you hear them.


BTW does this mean the A/C sinktrap is out? I just got a whole bunch of turbo housings/chra's from my friend, and I only work 2 days this week.

haha, I didn't know you did a write up on that mod.. I actually jbweld'd the sensor in to seal it, so i'm sure it's fine.

I wanted the sinktrap, but I sold the sinktrap manifold I made and needed something quick. I can't wait to see how the HX35 responds without exhaust leaks     

I might be picking up a straight T3 with a stage 1 wheel, .42 .48 housings, so that should be a fun little turbo for ripping on it around town. If all the seals are good I might make it into something like a GT28RS, quick spool but still good for 350hp

[HiProfile]

I meant the AC version you wanted welded up.

My writeup is burried in the E.M. subforum. I guess JB weld would work, but if you don't triple-check everything, you're SOL on every part. And technically for the record, JD claims he did that 18 years ago, right after Honda struck the first mold for tb map sensors.

[Joseph Davis]

put a 4 bar map sensor in my oem map housing.. $15 invested total

Fucking copy cat.

Yeah, I love how everyone ran with my idea.

[boosted 00 black si]

why would u want that small ass turbo on ur car??

[DmC]

put a 4 bar map sensor in my oem map housing.. $15 invested total

Fucking copy cat.

Yeah, I love how everyone ran with my idea.

Daves man cave has a few hundred in it.

[Zarcorp]

That skeeze in the pink panties would come out of Jacksonville.

I got phantom crab itch just thinking about that bitch.

[Joseph Davis]

put a 4 bar map sensor in my oem map housing.. $15 invested total

Fucking copy cat.

Yeah, I love how everyone ran with my idea.

Daves man cave has a few hundred in it.

I freely give Dave anything I have ever produced.  Everyone else is the faker.

[DmC]

Right on never met a better guy.  except for maybe FFooowwweee but it's close.