Topic: Today I had to use my AK, It was a good day (Read 11375 times)

LS1pwNzJ00 · « **Reply #30 on:** March 08, 2009, 08:30:09 PM »

Noob, who cleans an AK?

Stealthmode · « **Reply #31 on:** March 08, 2009, 08:34:10 PM »

"I'm not an MC, I'm not a G,
I'm an A to fucken Z, and everything in between."

bigdaddyvtec · « **Reply #32 on:** March 08, 2009, 08:42:28 PM »

Quote from: LS1pwNzJ00 on March 08, 2009, 08:30:09 PM

Noob, who cleans an AK?

Niggaz that blast till the bore is whistling from the heat...

LOL...

Steve:

Those are the TAPCO mags yes??? Stock as well??? I went with the aluminum, tube version. Actually I believe that this is the same side rail mount and scope setup too in this pic.

Yours doesnt sidefold gaystyle does it?? I hate sidefolders... Theyre ALWAYS loose like Widebuddys moms buttocks...

2 questions...

1: How long is the bitch from end to end with the stock collapsed.... (End of your brake to end of stock
2: IS that a slant brake on it?

LS1pwNzJ00 · « **Reply #33 on:** March 08, 2009, 09:21:29 PM »

theres no brake on it because its a saiga, I have a few ak's that are dirty as fuck, i refuse to clean an ak, slap some oil or some grease on the rails and bolt and its good to go again.

bryantaylor · « **Reply #34 on:** March 08, 2009, 09:28:23 PM »

Quote from: Atticus on March 08, 2009, 07:28:19 PM

bryantaylor
i take it that was from a propped up stance?
nice grouping but move that shit out to 110y (100m)

shot off the bi-pod, actually was shooting at 200yards the next day

bigdaddyvtec · « **Reply #35 on:** March 08, 2009, 09:30:08 PM »

Quote from: LS1pwNzJ00 on March 08, 2009, 09:21:29 PM

theres no brake on it because its a saiga, I have a few ak's that are dirty as fuck, i refuse to clean an ak, slap some oil or some grease on the rails and bolt and its good to go again.

You can still put brakes on those bitches...

shIT MINE CAME WITH A GAY AS SPOT WELD (us BARREL NUT TOO) GHAD TO CUT IT TO GET IT TO TAKE THE BRAKE (iT DID HAVE THE lh 14x1 thread)

Fuck capslock takeitawayplsk..

LOL

Stealthmode · « **Reply #36 on:** March 08, 2009, 09:34:28 PM »

Saiga 7.62

Tapco 6 position stock (non-folding)
Tapco 30rd AK mags
Dinzag bullet guide
Pistol grip (not sure of brand, bought it private, but there's only like 5 options anyhow)
Stock handguard modified by me and a band saw
No muzzle break, I like the fire.

t_cel_t · « **Reply #37 on:** March 08, 2009, 09:46:16 PM »

yeah check dinzag he has a good loan a tool for barrel threading, i did mine

Stealthmode · « **Reply #38 on:** March 08, 2009, 09:49:30 PM »

Yeah, his only problem (and it seems so with every parts provider) is that he takes 4 days to respond to any emails, and 4 months to ship shit. None of them have fast shipping, so it's hard to pull the shipping 101 card on him.

Atmosfear · « **Reply #39 on:** March 09, 2009, 03:52:21 AM »

I get all my rounds here:

http://www.ammoman.com/default.htm

Stock have been a bit low lately though. All prices include shipping and they dont fuck around. They get your shit out to you quickly.

Supposedly there is another spot out there that doesnt have a gate and you can drive into it, I havent found it yet though.

CivicOCD · « **Reply #40 on:** March 09, 2009, 07:24:49 AM »

Quote from: ryan89crx on March 08, 2009, 06:41:09 PM

Quote from: LS1pwNzJ00 on March 08, 2009, 04:49:54 PM
What magazine is on that SKS? I heard that they dont feed well with the high aftermarket mags. Although it woudl be completely illegal to put one on in ca. Gay ass state.
its a Tapco 20rd. stock is also a Tapco. i do still have a steel 30rd mag as well
Quote from: bigdaddyvtec on March 08, 2009, 04:55:43 PM
I had a SKS back in the days... steel 30 rounders.. That thing fed like shit from day 1 with it.... Obviously my bitch has no feed issues..

LOL
ive never had a feed issue, although one of my bud's SKS feeds like shit. i could blow through a steel 30rd clip without a hiccup. in fact, this thing has NEVER misfed/jammed/misfired on me at all

often what is overlooked in situations described such as this, the static empty/full magazine spring tension is below, right at, or barely above the minimum rated full cyclic (auto) or rapid-semi firing feed pressure.

if the spring is weak, it can't feed the round fast enough.
yes I realize that concept is simple stupid, but it is VERY often overlooked.

medium to large capacity 7.62 and 5.56 magazine's that have been left 50-70% loaded for extended periods of time are NOTORIOUS for this.

imburne · « **Reply #41 on:** March 09, 2009, 07:28:37 AM »

Damn you ladies have some nice guns!

random-strike · « **Reply #42 on:** March 09, 2009, 01:20:16 PM »

sweet ak nigger lover

98vtec · « **Reply #43 on:** March 09, 2009, 04:44:41 PM »

damn that looks like a lot of fun. We have a shooting range pretty close by but i dont think i could afford to buy one of those guns. How much do these things run?

bigdaddyvtec · « **Reply #44 on:** March 09, 2009, 08:34:06 PM »

Quote from: random-strike on March 09, 2009, 01:20:16 PM

sweet ak nigger lover

Thank ya bozzz...

NW Tree stump attack meet???

Atticus · « **Reply #45 on:** March 10, 2009, 08:44:37 PM »

Quote from: bryantaylor on March 08, 2009, 09:28:23 PM

Quote from: Atticus on March 08, 2009, 07:28:19 PM

bryantaylor
i take it that was from a propped up stance?
nice grouping but move that shit out to 110y (100m)

shot off the bi-pod, actually was shooting at 200yards the next day

dont tell me that pic was from the 200y day

Corey · « **Reply #46 on:** March 10, 2009, 08:53:10 PM »

Quote from: 98vtec on March 09, 2009, 04:44:41 PM

damn that looks like a lot of fun. We have a shooting range pretty close by but i dont think i could afford to buy one of those guns. How much do these things run?

300-1200.

bigdaddyvtec · « **Reply #47 on:** March 10, 2009, 09:02:04 PM »

You cant fucking TOUCH ANY AK for 300 thats not cut in half (parts kit), and even then although they MIGHT be listed.... Getting one in your hands is not doable in the least for that.

A run of the mill AK starts at about 695-750 right about now. Thats a low to mid grade one too.

Corey · « **Reply #48 on:** March 10, 2009, 09:15:44 PM »

Quote from: bigdaddyvtec on March 10, 2009, 09:02:04 PM

You cant fucking TOUCH ANY AK for 300 thats not cut in half (parts kit), and even then although they MIGHT be listed.... Getting one in your hands is not doable in the least for that.

A run of the mill AK starts at about 695-750 right about now. Thats a low to mid grade one too.

im not talking about from a gun dealer for 300. i can get an ak local for 400 thats NOT a parts build but a legit ak. since ak47's are not legal in CT i wont be going there but you CAN find them cheap if you look.

after buying my czech vz im not even interested in an AK. it blows them out of the water in quality and accuracy.

malichite · « **Reply #49 on:** March 10, 2009, 09:25:50 PM »

Danm, where you shooting in Oly? I just moved over to Port Orchard so I am not to far. I need a place to go shoot.

bigdaddyvtec · « **Reply #50 on:** March 10, 2009, 09:30:28 PM »

Up around Black Lake

News:

Author Topic: Today I had to use my AK, It was a good day (Read 11375 times)