:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

BDVT's BroDozzer gets compound twin turbos!... (link)

Pages: [1]   Go Down

Author Topic: vtec press selinoid.....  (Read 5809 times)

JACER63

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 167916
  • well shit..
vtec press selinoid.....
« on: July 22, 2009, 07:44:52 PM »
any one know how to get rid of the cel if you are runniong a vtec sel with no pressure unit?single wire vtak
my car is a 91 crx with obd 1 jumper harness.p72 ecu with p28 base map n/a, crome pro
can i just ground that wire or what else could i do?

thanks...

much appreciation
Logged

CSaddict

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: vtec press selinoid.....
« Reply #1 on: July 22, 2009, 07:48:20 PM »
Its in crome pro. Disable and ground signal wire.
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

JACER63

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 167916
  • well shit..
Re: vtec press selinoid.....
« Reply #2 on: July 22, 2009, 07:57:22 PM »
yeah i saw it in crome gold, but not in crome pro ... need to burn a chip in this car.so  all i do is disable and then ground the signal wire coming from the harness right which is a gray wire on mine?  thanks csaddict
Logged

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: vtec press selinoid.....
« Reply #3 on: July 22, 2009, 08:14:25 PM »
yep or you can tap the signal wire with your vtec wire but best way is to disable and ground
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

JACER63

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 167916
  • well shit..
Re: vtec press selinoid.....
« Reply #4 on: July 22, 2009, 08:17:17 PM »
ok ill try this thanks guys for your help... :)
Logged

BangBusMaster

  • Full Member
  • ***
  • Offline Offline
  • Posts: 199
Re: vtec press selinoid.....
« Reply #5 on: July 23, 2009, 12:49:30 AM »
A4 T'd to D6.
Logged

JACER63

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 167916
  • well shit..
Re: vtec press selinoid.....
« Reply #6 on: July 25, 2009, 11:38:38 AM »
Quote from: lilpooh21186 on July 22, 2009, 08:14:25 PM
yep or you can tap the signal wire with your vtec wire but best way is to disable and ground

thanks for all your help guys.. got it to work with no more cels..woo hoo
Logged

88dx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7885
Re: vtec press selinoid.....
« Reply #7 on: July 25, 2009, 02:25:35 PM »
Logged
Pages: [1]   Go Up
« previous next »