:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Official RHMT TANK! that's right i said a TANK! (link)

Pages: [1]   Go Down

Author Topic: hi  (Read 8325 times)

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
hi
« on: May 11, 2010, 09:24:58 PM »
hi
« Last Edit: May 16, 2010, 12:13:14 PM by jdmhatchracer94 »
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: code 16? How to check
« Reply #1 on: May 12, 2010, 12:11:55 AM »
Quote from: jdmhatchracer94 on May 11, 2010, 09:24:58 PM
Got my basemap in tried to start the car will not start at all. Give it a little throttle and bogs misses like timing but then i throw code 16 fuel injector? how do you check injectors? Bought from a fellow member who said they were 780cc but fuck who know there were no #'s on them HELP

i'm definatley no expert, but do you need a resistor box?
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: code 16? How to check
« Reply #2 on: May 12, 2010, 12:21:39 AM »
yes i have one installed just did a lil reasearch and they all came out to 3ohm meaning low impedence correct?
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: Need Basemap quickly
« Reply #3 on: May 12, 2010, 01:06:38 AM »
jd doesnt like basemap begging ::)
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: Need Basemap quickly
« Reply #4 on: May 12, 2010, 01:10:21 AM »
got one from some else and need to know if that is the prob or not gotta have this thing running by the dyno day
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: Need Basemap quickly HELP
« Reply #5 on: May 12, 2010, 01:38:43 AM »
Stock ecu and stock injectors you should try first.
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

TheMadScientist

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1937
  • I'm like Batman and Shit
Re: Need Basemap quickly HELP
« Reply #6 on: May 12, 2010, 07:30:30 AM »
Quote from: ApexSilver06MR on May 12, 2010, 01:38:43 AM
Stock ecu and stock injectors you should try first.
+1

P.S. No basemap begging allowed here learn to do it yourself and ask for help with how to do it
Logged
Why would I not be surprised if your pink slip included "quotquotthen Mr Davis overturned the table while shouting, HOWS THAT FOR FLUID MECHANICS?!"quotquot?

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Need Basemap quickly HELP
« Reply #7 on: May 12, 2010, 12:58:30 PM »
Apexi's correct.

CEL 16 is injector test circuit fail, only happens if there is an open circuit.  Check your wiring.
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: Need Basemap quickly
« Reply #8 on: May 12, 2010, 04:25:54 PM »
Quote from: jdmhatchracer94 on May 12, 2010, 01:10:21 AM
got one from some else and need to know if that is the prob or not gotta have this thing running by the dyno day


like I told you last night. Put the 240's in and set you boost cut at 1lb And run a stock map. Get it to the dyno day meet and im sure the something will happen with it.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: questions casue I dun't know what i am doin
« Reply #9 on: May 12, 2010, 09:09:50 PM »
curious is there a difference in resistor boxes? I put the ohm meter on the power in and out to the injector got a 007 reading when i did the injectors the read 003? so am I running the wrong resistor box?
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: questions casue I dun't know what i am doin
« Reply #10 on: May 12, 2010, 09:14:05 PM »
All resistor boxes are made by the same place, all are 6.8 ohm resistors.

n00b electrical mistake 101, you must remove the component from the circuit in order to determine it's resistance.  FUCK YOU!!
Logged

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: questions casue I dun't know what i am doin
« Reply #11 on: May 12, 2010, 09:20:42 PM »
it wasn't plugged into anything wtf? nothing was connected at all when i checked it
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother
Pages: [1]   Go Up
« previous next »