:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: [1]   Go Down

Author Topic: If this isn't a real home made turbo kit, I don't know WTF is.... NWS  (Read 8463 times)

DSharp

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 407
If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« on: September 20, 2010, 11:57:11 PM »
This is my shitbox.  If you don't like it, pass the blunt to the nigga on the left.  :noel:

All tuning, fabrication, building, beer drinking, etc...  was done by ME. 

ALSO, I want my damn name back!  DBSharp is already taken!

OK I'm going to start off with the newest shit first!

My CAD-designed BILLET motor mount! 


Intercooler I will be using soon fitted up.


This is what I got figured up to make it work.


Engine bay shots!




Fresh built motor!


Rod bolt stretch!


Wait thats a f22?


Its ALL pink in the middle!


Hanging it out to dry..


WTF?


Thanks for fucking me over OBX!


Down to the basics


New turbo!


The old look


Mocking it all up after fabrication!




Cheepo band saw


Now that your dick is hard here is some porn to finish the job.....




more to come..
« Last Edit: September 21, 2010, 01:40:26 PM by DSharp »
Logged
No escape from the mass mind rape

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #1 on: September 21, 2010, 12:23:36 AM »
Looks good. Welcome, but your #1 piston is in your #4 cyl.


Quote from: DSharp on September 20, 2010, 11:57:11 PM

Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

d112crzy

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3449
  • white power
    • CrzyTuning
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #2 on: September 21, 2010, 12:26:22 AM »
Post more porn faggot.
Logged
www.crzytuning.com


Nobody comes into my house and shits all over it.  

DSharp

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 407
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #3 on: September 21, 2010, 12:27:02 AM »
Let me start by saying,...  drugs are bad, mkay....

LOL naw, I labeled em on the rods.  Not like I can measure piston to wall clearance with the teflon shit anyways...
Logged
No escape from the mass mind rape

DSharp

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 407
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #4 on: September 21, 2010, 12:41:04 AM »
Quote from: d112crzy on September 21, 2010, 12:26:22 AM
Post more porn faggot.
Heres some porn for ya beaner! 




Logged
No escape from the mass mind rape

Phate

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 659
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #5 on: September 21, 2010, 12:47:54 AM »
Quote from: DSharp on September 20, 2010, 11:57:11 PM

WTF?


Opening up the bearing orifice to match the block?  Nice, I'm probably going to do that on the new motor.
Logged
It never ceases to confuse me that people think this is a car site.

http://i15.photobucket.com/albums/a380/overdrive14/2vkkmt3.png

davidawg

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 44
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #6 on: September 21, 2010, 07:44:36 PM »
66.666666666666% of your porn is garbage
btw, use a 90 degree coupler instead of trying to modify your end tank.
now post better porn!
Logged
ford escort zx2 built with junkyard turbo shit... nbspnbsp evo8 16g turbo will be next
i drive in the mountains

TTC

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1786
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #7 on: September 21, 2010, 08:40:08 PM »
Since you're opening up the bearing oil hole how did you deburr it without damaging the bearing surface?
Logged

DSharp

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 407
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #8 on: September 21, 2010, 11:30:43 PM »
very careful strokes with the needle file.  I filed away from the bearing side.  On a microscopic level I'm sure there is still some bur left, hopefully there wont be an issue.  I tried using a counter sink, but it left a burr I could feel.  I think that a countersink deburring tool would have been better.

I could fab a pipe that has 3 90 deg bends in it.  One 90 wont cut it.

Can you guys see the porn or do you just not like latino the porn I put up for Joser?
I'll try harder on the porn..... later.
Logged
No escape from the mass mind rape

DSharp

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 407
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #9 on: September 30, 2010, 11:58:57 AM »
well I know how much you guys like porn so here's a small collection of nude beach pics.  enjoy!

 


























     
Logged
No escape from the mass mind rape

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: If this isn't a real home made turbo kit, I don't know WTF is.... NWS
« Reply #10 on: September 30, 2010, 05:12:17 PM »
 :D
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.
Pages: [1]   Go Up
« previous next »