:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

BDVT's BroDozzer gets compound twin turbos!... (link)

Pages: [1]   Go Down

Author Topic: Gsr obd1 block going into an obd2 si  (Read 4486 times)

d-rail

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1005
Gsr obd1 block going into an obd2 si
« on: May 02, 2009, 09:08:43 PM »
Putting an obd1 short block which doesn't have the crank angle sensor on the front but the motor is going into an obd2 car. do i use the obd1 distributor on it for the crank angle sensor or what? Thanks
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Gsr obd1 block going into an obd2 si
« Reply #1 on: May 03, 2009, 03:11:24 AM »
distributor makes no difference.

you need to swap on a OBD2 oil pump, gear, sensor, and cover.


edit: or run the car OBD1 with a jumper harness and "P28" ECU...
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

chris

  • Guest
Re: Gsr obd1 block going into an obd2 si
« Reply #2 on: May 03, 2009, 03:25:17 AM »
Quote from: turbohf on May 03, 2009, 03:11:24 AM
distributor makes no difference.

you need to swap on a OBD2 oil pump, gear, sensor, and cover.


edit: or run the car OBD1 with a jumper harness and "P28" ECU...
Logged

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: Gsr obd1 block going into an obd2 si
« Reply #3 on: May 03, 2009, 08:00:44 AM »
i got the sensor and a obd2b16 oil pump no gear though
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: Gsr obd1 block going into an obd2 si
« Reply #4 on: May 03, 2009, 11:33:40 AM »
Quote from: turbohf on May 03, 2009, 03:11:24 AM
distributor makes no difference.

you need to swap on a OBD2 oil pump, gear, sensor, and cover.


edit: or run the car OBD1 with a jumper harness and "P28" ECU...
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

88dx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7885
Re: Gsr obd1 block going into an obd2 si
« Reply #5 on: May 03, 2009, 01:23:52 PM »
Quote from: turbohf on May 03, 2009, 03:11:24 AM
distributor makes no difference.

you need to swap on a OBD2 oil pump, gear, sensor, and cover.


edit: or run the car OBD1 with a jumper harness and "P28" ECU...
Logged

chris

  • Guest
Re: Gsr obd1 block going into an obd2 si
« Reply #6 on: May 03, 2009, 02:33:27 PM »
Also for people who do this for future reference if you do swap on the obd2 pump w/ cfk sensor you will need to


a. get a obd2 usdm lower timing belt cover b series matching engine block
b. trim the lower t-belt to fit cfk


Or


http://technet.ff-squad.com/ckftrick.htm
Logged

chris

  • Guest
Re: Gsr obd1 block going into an obd2 si
« Reply #7 on: May 03, 2009, 02:34:20 PM »
Also all JDM obd2 motors do not have cfk on oil pump only usdm 96+ model engines
Logged

turbo4life

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1734
  • trying to get a college education.
Re: Gsr obd1 block going into an obd2 si
« Reply #8 on: May 05, 2009, 03:58:39 AM »
DO THE CKP TRICK/BYPASS  .. you can jump the ckp sensor to  one of the sensors in the dizzy  and give feed in parallel to the ecu from that one dizzy sensor

 
Honda CKF Bypass Trick
Logged
ILL KEEP MY GUNS, FREEDOM &ampamp MONEY....YOU CAN KEEP THE "quotquotCHANGE"quotquot

NO BOOSTED RIDES!! dont drive a honda no mo!!!! miss that shit!!!

BoostForLife

  • Guest
Re: Gsr obd1 block going into an obd2 si
« Reply #9 on: May 05, 2009, 04:07:39 AM »
Pretty good find right there. Never knew you could do that. (Makes me wonder if I can do similar shit to my ZC swap in the CRX without chipping the ecu.)
Logged
Pages: [1]   Go Up
« previous next »