Topic: RHMT Official Gun Thread - Part II (Read 7578 times)

imburne · « **on:** January 22, 2012, 02:17:00 PM »

In light of the original RHMT Gun Thread here http://www.realhomemadeturbo.com/forum/index.php/topic,529.0.html

Quote from: bigdaddyvtec on March 11, 2009, 09:55:55 PM

One rule: Dont be stupid

Dont post shit that shouldnt be shown if you dont want it to be seen... BY ANYONE. I know we have some guys who have some nice shit.

Lets see it

Thread is open for discussion and infomation exchange as well...

Will start..

Cali legal AR-15 in 6.8mm SPC

jabberwock · « **Reply #1 on:** January 22, 2012, 07:22:00 PM »

1943 Mosin
1891 Argentine Mauser
Mossberg 500 AT with 18.5 and 28"
Winchester model 290
Ruger 22/45 which is soon to get grip bushings installed and some thick grips

Next up will be a Polish TTC and a Lee 12ga slug mold

Cmak · « **Reply #2 on:** January 22, 2012, 08:46:15 PM »

I'll post my shit tonight.

t_cel_t · « **Reply #3 on:** January 23, 2012, 12:49:52 AM »

since we got ccw here FINALLY

, ive been carrying this bad boy
kel-tec p3at in a wallet holster. doesnt even feel like im carrying anything. actually weighs less then my leatherman. have about 300rds through it without a single jam.

El Beefo · « **Reply #4 on:** January 23, 2012, 02:42:11 AM »

Really digging the p3at. Pretty sweet for under $250. Better then my old Saturday night special Jimenez Arms JA9 and prob more accurate.

Stealthmode · « **Reply #5 on:** January 23, 2012, 02:58:14 AM »

Saiga 7.62 with Zombie blend-in suit.

Older and Newer carry piece. (couldn't find a newer pic)

92CXyD · « **Reply #6 on:** January 23, 2012, 08:15:37 AM »

Quote from: t_cel_t on January 23, 2012, 12:49:52 AM

since we got ccw here FINALLY , ive been carrying this bad boy

In Wyoming no permit required

http://billingsgazette.com/news/state-and-regional/wyoming/article_968f59ca-f3f7-538d-a878-556d3aeb26c4.html

DSharp · « **Reply #7 on:** January 23, 2012, 03:27:56 PM »

Quote from: t_cel_t on January 23, 2012, 12:49:52 AM

since we got ccw here FINALLY , ive been carrying this bad boy
kel-tec p3at in a wallet holster. doesnt even feel like im carrying anything. actually weighs less then my leatherman. have about 300rds through it without a single jam.

I want!

ironcrx · « **Reply #8 on:** January 23, 2012, 03:49:51 PM »

thats a pretty bad ass ccw gun and holster combo

This is the same gun I got:

Taures Millenium 40cal.

ghettoturbo · « **Reply #9 on:** January 23, 2012, 10:55:02 PM »

Quote from: t_cel_t on January 23, 2012, 12:49:52 AM

since we got ccw here FINALLY , ive been carrying this bad boy
kel-tec p3at in a wallet holster. doesnt even feel like im carrying anything. actually weighs less then my leatherman. have about 300rds through it without a single jam.

How do you like firing that without removing it from the holster? Seems like it would be a handful.

Downstairs:

In case the zombies follow me upstairs:

The gang:

Carry:

I have an Anschutz Exemplar and Taurus Raging Bee waiting to be added to my permit too... the process is a bit slow in NY.

-Jay

Lowerit · « **Reply #10 on:** January 23, 2012, 10:58:53 PM »

I inherited a sten gun which is hidden away in a safe..

fuck your fag guns.

t_cel_t · « **Reply #11 on:** January 24, 2012, 03:12:09 AM »

Quote from: ghettoturbo on January 23, 2012, 10:55:02 PM

Quote from: t_cel_t on January 23, 2012, 12:49:52 AM
since we got ccw here FINALLY , ive been carrying this bad boy
kel-tec p3at in a wallet holster. doesnt even feel like im carrying anything. actually weighs less then my leatherman. have about 300rds through it without a single jam.

it now shoots really well from the holster, actually sucked the first time as the gun kinda jumps up out of the holster. i added a zip tie between the trigger guard and the finger hole and now it stays in there tight and doesnt move around, zip tie doesnt impede and function. the hole for your middle finger is prefect and i think i can actually hold on the to gun more securely when firing with the holster.

crttaz · « **Reply #12 on:** January 24, 2012, 04:16:16 AM »

ghettoturbo, is that a S&W 686 I spy?

Mine

ghettoturbo · « **Reply #13 on:** January 24, 2012, 08:51:53 AM »

Quote from: crttaz on January 24, 2012, 04:16:16 AM

ghettoturbo, is that a S&W 686 I spy?

Mine

I have its little brother, the 617 22lr

-Jay

bigdaddyvtec · « **Reply #14 on:** January 24, 2012, 02:11:51 PM »

I had a keltec p3aT.

HATED IT.. My man paws didnt play nice with the lil trigger guard. Nor was the trigger worth a fuck. BUT, Ruger did rip the design off and got sued for it so theres something there. I just didnt like it.

I bought a Taurus TCP. Bigger trigger guard and MUCH MUCH MUCH better trigger. IF looking for a pocket rat gun, I highly suggest if your a snob to get over the name and shoot one. LOVEEEE mine and its truly very accurate for how lil it is. I carry Buffalo Bore hardcast 100 gr.

Shit hits like a 9 at close range.

Put holes in a baseball at 21 feet with it.

Then again I like Taurus stuff In my experience. I bought another PT145 after selling my first one, bying a XD45 compact and not liking it with the extra 1" of barell for carrying IWB.

The new XDs 45 makes my openis hard... 3" Bbl, but single stack so only 5+1. Not enough for daddy.. Wish it was double stack and held a couple more, with the extended mag for the 10 capacity of the PT145.

Seriously, the PT145s are awesome for CC 45.

My main carrys are:

XD 40 SC
PT145 again....
TCP for pocket carry,
XDM9 3.8 Compact (only reason its below the rest is the .8" of bareel makes it shitty for IWB)

Only pocket 380 Id rather have is a sig p 238.

JaredKaragen · « **Reply #15 on:** January 24, 2012, 05:12:21 PM »

Davis D22LR

Ya... I went there...

bigdaddyvtec · « **Reply #16 on:** January 24, 2012, 05:44:43 PM »

Jay:

It looks like I have the same safe...

Did you have any problems mounting the holder thingy on the door? hHat did you use for screws to not fuck up the inner door panel?

I want to hang something similar on my door. to hold some odds and ends.

crxvtec91 · « **Reply #17 on:** January 24, 2012, 05:47:29 PM »

I want something like this

ghettoturbo · « **Reply #18 on:** January 24, 2012, 11:01:21 PM »

Quote from: bigdaddyvtec on January 24, 2012, 05:44:43 PM

Jay:

It looks like I have the same safe...

Did you have any problems mounting the holder thingy on the door? hHat did you use for screws to not fuck up the inner door panel?

I want to hang something similar on my door. to hold some odds and ends.

It actually mounts with little clips that go in around the door panel (between the panel and the door itself). The trick is that they make the clips for the thicker panels on the fancier safes, and this safe has a very thin one. A few minutes bending them with a hammer and a vise made everything play nice together.

-Jay

qikenuf · « **Reply #19 on:** January 30, 2012, 06:51:45 PM »

Few new-er pics.

Did the 1911 work myself. Started with a cheap SA Milspec and changed everything out and did some frame work. Shoots 2-3" groups at 25yd with good ammo now.

imburne · « **Reply #20 on:** January 30, 2012, 09:32:44 PM »

Updated for some fancier pics of mine. Anyone have a jig they want to lend me to complete a 80% lower?

qikenuf · « **Reply #21 on:** January 31, 2012, 12:15:07 AM »

Always wanted to build an AK from parts, but had way too many bad experiences with the ones that work provided. Post pics when building

RotaryGeek · « **Reply #22 on:** February 01, 2012, 02:19:45 AM »

Im still rocking the Hi-Point 9mm. Actually been a really good gun. Must have run through a few thousand rounds now, with no more than cleaning the barrel maybe 4 times ever. Only had a couple jams at first while the magazine broke in. Been much much better than i ever expected, especially since I only paid like $200ish for the gun, 2 magazines, and a holster. I have a pic somewhere, let me see if i can find it.

RotaryGeek · « **Reply #23 on:** February 01, 2012, 02:38:47 AM »

Hi-Point 9mm. I made the hip hugger holster. Fits pretty nice. If i wear a big enough shirt, it actually conceals the pistol pretty well.

Uploaded with ImageShack.us

Nother shot

Uploaded with ImageShack.us

Mossberg Maverick i picked up at walmart on sale brand new for $99. I can't find them at pawn shops for less than $120 now lol.

Uploaded with ImageShack.us

Old school .50 cal Black powder. This is fun to shoot. I haven't seen anybody posting any black powders yet. I have like 3 pistols as well. 2 .45's and a .50 cal. plus another .45 rifle. Most are reproductions, but the .45 rifle is really old and one pistol is likely real as well.

Uploaded with ImageShack.us[/URL

[URL=http://imageshack.us/photo/my-images/585/photo7us.jpg/]

Uploaded with ImageShack.us

JaredKaragen · « **Reply #24 on:** February 01, 2012, 11:29:56 PM »

Quote from: poopmouth on January 31, 2012, 12:15:07 AM

Always wanted to build an AK from parts, but had way too many bad experiences with the ones that work provided. Post pics when building

just finishing up a buddys calip spec AK...

too bad were in cali... we have the full auto spring, rocker plate (that hits disconnector) and trigger...

ill post pics when its done =)

he got lucky with his pats kit, it was a romanian =)

Cmak · « **Reply #25 on:** February 02, 2012, 02:56:56 AM »

The baddest gun I own, also the most used and most versatile.

Rest of my junk

Collection has definitely been slimmed down a lot because of hard times, gonna build it back up real soon.

Brolin Arms BP370 12ga
Mossberg 500A 12ga
Ruger Mini 14 .223
Remington model 597 .22LR
Rossi single shot rifle w/ .17HMR barrel and .410 shotgun barrel
Taurus Revolver .44 Magnum w/ Magna-Porting (Basically a Raging Bull in .44)
Colt 1911 Series 80 Mk IV 9mm also have .38 Super +P conversion for it.
Ruger Single Six .22LR

Let me know if you wanna see close ups on anything.

ghettoturbo · « **Reply #26 on:** February 04, 2012, 05:27:05 PM »

Just picked this up today:

Anschutz 22lr Exemplar

-Jay

rawr · « **Reply #27 on:** February 04, 2012, 05:58:19 PM »

someone wants back in the airforce

t_cel_t · « **Reply #28 on:** February 08, 2012, 01:30:20 AM »

yay, new rifle tonight
rem 700 sps tactical, .308 been wanting one for a long time and finally said fuck it

News:

Author Topic: RHMT Official Gun Thread - Part II (Read 7578 times)