:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: [1]   Go Down

Author Topic: Pistons slap, does this normal?  (Read 3610 times)

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Pistons slap, does this normal?
« on: September 14, 2015, 07:25:01 PM »
After 1000kms, oil pump failed, rod bearing damaged, still have to remove for check it, but after remove head, noticed this piston slap..does this normal?

https://www.youtube.com/watch?v=QfNmApY6fHU

 :o

ive heard vitara pistons sounds a lot sometimes but im not sure on this.

Z6 turbo running only 7psi.
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Pistons slap, does this normal?
« Reply #1 on: September 14, 2015, 09:15:26 PM »
was just gonna say that shit is normal...but after watching the video, she seems to be on the loose side...

..or ready to make some power  :noel:


how did it sounds before the pump died? cold rattle, then quite once warmed up?


also. buddy decided to drive his rod knocker home, so motor continued to pump sand shit that use to be oil pump/bearings threw the motor. pistons where scuffed to shit. might want to pull that all the way apart and check the pistons, cylinder walls for round, etc.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10830
  • Spreading the rhmt word like PB&J
Re: Pistons slap, does this normal?
« Reply #2 on: September 14, 2015, 09:42:02 PM »
What was the p2w built at?
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

BoostedSchemes

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 18561
  • ☂BloodRaincoat☂
Re: Pistons slap, does this normal?
« Reply #3 on: September 14, 2015, 09:46:22 PM »
if you cant drop a match into the oil pan past the piston shes ready rock
Logged
All posts before 8am and after 3pm are produced under the influence of alcohol.


Major Loser, please tell me how to be smart and interesting like you~

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Pistons slap, does this normal?
« Reply #4 on: September 15, 2015, 04:08:17 AM »
It sound same cold and warmed up, typycal rod noise at 2-3k rpm.

I remember i put good clearance in piston rings for some track use, p2w i can't remember neither lol, that build was alot just used recelently, it's using 75.50mm piston because i bought the bare block honed to 75.5mm.. i have to remove pistons so i'd measure it.

oil level was good after these 1.200kms (750miles)..  :noel:

Logged

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Pistons slap, does this normal?
« Reply #5 on: September 16, 2015, 07:01:09 PM »
bearing was detroyed in 3rd cylinder.. :-\ need another crank and bearings. :'(
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: Pistons slap, does this normal?
« Reply #6 on: September 21, 2015, 01:01:50 PM »
Those are probably original vitaras, I had a set an they were like that. They were considerably loose in 75mm bores so I never ran them.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid
Pages: [1]   Go Up
« previous next »