:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Build thread database... check it. (link)

Pages: [1]   Go Down

Author Topic: desoldering iron?  (Read 4474 times)

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
desoldering iron?
« on: January 03, 2010, 04:13:50 AM »
SO im sick of the mess my RS bulb desolder makes any one her use the hakko 808 gun i see good reviews but on the interwebs but rather have noggish feed back.

Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

SDRAWKCAB

  • D series BALLA!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2676
  • Rhino
Re: desoldering iron?
« Reply #1 on: January 03, 2010, 04:24:43 AM »
regular decent iron and a small vacuum reduced to a gutted melted bic pen..
DONE!
Logged
I have sex like a winning race car.
I always finish first and have left many disappointed.

Foowee

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1816
Re: desoldering iron?
« Reply #2 on: January 03, 2010, 11:36:56 AM »
1.  Cut the bulb on you rs iron in half. 

2.  Tape your vacuum cleaner hose in the end of the bulb.

3.  lay it on the pin you want to de-solder. 

4.  Let it melt.

5.  turn on the vacuum... 

6.  turn off vacuum. 

Repeat 3-6 27 times...

then send me a hooker n a pbr for saving you $164...
« Last Edit: January 03, 2010, 11:41:57 AM by Foowee »
Logged

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: desoldering iron?
« Reply #3 on: January 03, 2010, 03:56:18 PM »
Supposed to be good, never got around to buying one.
Logged

7808

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2513
Re: desoldering iron?
« Reply #4 on: January 03, 2010, 03:58:57 PM »
my radio shack desoldering iron works pretty good and it was like $15
Logged

98vtec

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1076
  • try a warm glass of shut the fuck up
    • BBmoto Tuning
Re: desoldering iron?
« Reply #5 on: January 03, 2010, 04:12:35 PM »
i use the hakko 808.  Works great.  Better than the bullshit copper braids.  Especially on thin boards where the traces are easier to burn.
Logged
xXx Performance Tuning
-- In House DynoJet
SouthEast Neptune Tuner

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: desoldering iron?
« Reply #6 on: January 03, 2010, 08:23:37 PM »
^^^ confirmed another 808 sold
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: desoldering iron?
« Reply #7 on: January 03, 2010, 08:59:33 PM »
I use this


and this
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: desoldering iron?
« Reply #8 on: January 03, 2010, 09:33:43 PM »
I used blundar's Xytronics desoldering station.  I liked it, same build as my Aoyue SMD station just badge engineered.
Logged

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: desoldering iron?
« Reply #9 on: January 03, 2010, 11:10:54 PM »
Quote from: ratcityrex on January 03, 2010, 08:59:33 PM
I use this


and this

  i wouldnt trade my RS soldering pen for anything it just needs tips but there desloder bulb makes a fucking mess of shit to much heat on the board for the time it takes to melt solder on the j1 4 corners of socket and the c52
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

SDRAWKCAB

  • D series BALLA!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2676
  • Rhino
Re: desoldering iron?
« Reply #10 on: January 04, 2010, 01:57:36 PM »
Quote from: Foowee on January 03, 2010, 11:36:56 AM
1.  Cut the bulb on you rs iron in half. 

2.  Tape your vacuum cleaner hose in the end of the bulb.

3.  lay it on the pin you want to de-solder. 

4.  Let it melt.

5.  turn on the vacuum... 

6.  turn off vacuum. 

Repeat 3-6 27 times...

then send me a hooker n a pbr for saving you $164...

LOL  I just used alot of duck tape and a bic ben.
I think Im gonna go buy a desoldering ball.
Thank you sir
Logged
I have sex like a winning race car.
I always finish first and have left many disappointed.

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: desoldering iron?
« Reply #11 on: January 05, 2010, 05:46:34 PM »
Quote from: 7808 on January 03, 2010, 03:58:57 PM
my radio shack desoldering iron works pretty good and it was like $15

+1
Logged

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: desoldering iron?
« Reply #12 on: January 05, 2010, 11:20:33 PM »
only thing is if it was for me i would keep it but when it takes 30min to desolder a board the gun would take 15
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details
Pages: [1]   Go Up
« previous next »