Topic: UI's 703hp Purple beast - She is injured (Read 267453 times)

bigdaddyvtec · « **Reply #1320 on:** July 20, 2010, 10:14:06 PM »

Shit I can get you a better deal than that from him, and Ive never bought anything from him. Levi, get a GE sleeved block PLZKBAI.

Hes pissed because he knows you were questioning the install.

Fuck him.

narfdanarf · « **Reply #1321 on:** July 20, 2010, 10:24:25 PM »

I heard GE sleeve pricing just went up. Sucks but they definitely seem to work.

d112crzy · « **Reply #1322 on:** July 21, 2010, 01:01:18 AM »

I got quoted $1100 for an H block a few months ago from GE.

bigdaddyvtec · « **Reply #1323 on:** July 21, 2010, 01:15:10 AM »

Quote from: d112crzy on July 21, 2010, 01:01:18 AM

I got quoted $1100 for an H block a few months ago from GE.

definately do better than that.

runsfromdacops · « **Reply #1324 on:** July 21, 2010, 01:15:48 AM »

yep it went up like last week or so. gay

Passenger · « **Reply #1325 on:** July 21, 2010, 11:48:14 AM »

Lol, I missed a crack in the bore? And that caused the sleeve to swell .017"?
I'm gonna call this guy today.

Joseph Davis · « **Reply #1326 on:** July 21, 2010, 12:01:09 PM »

Quote from: Passenger on July 21, 2010, 11:48:14 AM

Lol, I missed a crack in the bore? And that caused the sleeve to swell .017"?
I'm gonna call this guy today.

Record the call. And don't forget to ask him what's this all aboot.

highroller54 · « **Reply #1327 on:** July 21, 2010, 12:11:42 PM »

Quote from: Passenger on July 21, 2010, 11:48:14 AM

Lol, I missed a crack in the bore? And that caused the sleeve to swell .017"?

this is what I was thinking, I acually thought I miss read what he was trying to say at first.

Passenger · « **Reply #1328 on:** July 21, 2010, 12:50:05 PM »

Quote from: Joseph Davis on July 21, 2010, 12:01:09 PM

Quote from: Passenger on July 21, 2010, 11:48:14 AM
Lol, I missed a crack in the bore? And that caused the sleeve to swell .017"?
I'm gonna call this guy today.

Record the call. And don't forget to ask him what's this all aboot.

What is the best way to record calls?
I have lingo internet phone, I wonder if I can record through that somehow, I know my voice mails go to my inbox which is sweet.

bigdaddyvtec · « **Reply #1329 on:** July 21, 2010, 12:59:54 PM »

LIke I said, I know of a few people that have had problems with Benson/Darton shit... They got about the same response from him... Same type anyways... The machinist/ tuner is an easy out for him.

Josh Ross and I were at an unnamed shop that had VIDEO FOOTAGE of one of Dans sleeves seeping, they couldnt figure it out... Took the block apart and pressure tested it and no issues... Then Warmed the block up (still apart) and sure as shit it "leaked"... He denied that was his issue too.... LOL.

Joseph Davis · « **Reply #1330 on:** July 21, 2010, 01:38:04 PM »

Quote from: Passenger on July 21, 2010, 12:50:05 PM

Quote from: Joseph Davis on July 21, 2010, 12:01:09 PM
Quote from: Passenger on July 21, 2010, 11:48:14 AM
Lol, I missed a crack in the bore? And that caused the sleeve to swell .017"?
I'm gonna call this guy today.

Record the call. And don't forget to ask him what's this all aboot.

What is the best way to record calls?
I have lingo internet phone, I wonder if I can record through that somehow, I know my voice mails go to my inbox which is sweet.

I have no clue how that works, but if the audio passes through your computer you should be able to record through the audio card.

Quote from: bigdaddyvtec on July 21, 2010, 12:59:54 PM

LIke I said, I know of a few people that have had problems with Benson/Darton shit...

Using an entry level performance sleeve in a high performance application, when Darton makes a GE-equivalent closed deck sleeve, and getting installer error/lack of customer support tied up with the Brand of sleeve used is horseshit, sir. Darton makes fine sleeves, makes more sleeves in a year than GE has ever made period, so please keep your anti-Darton comments out of this. Nobody cares that you love the taste of Robert's penis.

Passenger · « **Reply #1331 on:** July 21, 2010, 01:47:53 PM »

Quote from: Joseph Davis on July 21, 2010, 01:38:04 PM

Quote from: Passenger on July 21, 2010, 12:50:05 PM
Quote from: Joseph Davis on July 21, 2010, 12:01:09 PM
Quote from: Passenger on July 21, 2010, 11:48:14 AM
Lol, I missed a crack in the bore? And that caused the sleeve to swell .017"?
I'm gonna call this guy today.

Record the call. And don't forget to ask him what's this all aboot.

What is the best way to record calls?
I have lingo internet phone, I wonder if I can record through that somehow, I know my voice mails go to my inbox which is sweet.

I have no clue how that works, but if the audio passes through your computer you should be able to record through the audio card.

Quote from: bigdaddyvtec on July 21, 2010, 12:59:54 PM
LIke I said, I know of a few people that have had problems with Benson/Darton shit...

Using an entry level performance sleeve in a high performance application, when Darton makes a GE-equivalent closed deck sleeve, and getting installer error/lack of customer support tied up with the Brand of sleeve used is horseshit, sir. Darton makes fine sleeves, makes more sleeves in a year than GE has ever made period, so please keep your anti-Darton comments out of this. Nobody cares that you love the taste of Robert's penis.

I don't think its the audio that goes through my computer, the message is emailed to me so I assume the message is recorded on their end.

bigdaddyvtec · « **Reply #1332 on:** July 21, 2010, 01:49:19 PM »

My taste in p3n15 is irreivant...

The non braced sleeve design is shit. Its pretty common knowwledge that Darton is used across "racing" more predominately, however... The topic here is that the sleeves failed, weather or not its MFG or installer, unfortunately... For Levi (Who is all I really give a fuck in the equation)... He is continuing to take the cock with this car. I know how it feels, and its shitty, you know... Kind of like the chestnutty smell when JohnMichael shows up to a Hotrex party....

I have yet to deal with Robert, other then flaming him on the webz for being a complete ball licker.... I get a better deal on GE shit elsewhere. BUT, I have seen less issues in the honda community (oh PLEASE fucking forgive me that you Know so much more than the rest of the wqorld you fucking Nutsling) with GE sleeves than Dartons (Bensons super secret squirell bullshit included)... along the lines of Larrys bullshit, I put both of them in the same category. Hype, and misleading... With Customer service thats shit too.

DOnt you have a block to go weld up to be in the club???

LOL

That pic was awesome.

bigdaddyvtec · « **Reply #1333 on:** July 21, 2010, 01:51:24 PM »

Quote from: Passenger on July 21, 2010, 01:47:53 PM

I don't think its the audio that goes through my computer, the message is emailed to me so I assume the message is recorded on their end.

Just put that fucker on speaker phone and dont get too close to the mic.

you can record it toyour computer, or whatever. do a couple tests for propper again, then set it up my honarary American friend

Profit.

sewell94 · « **Reply #1334 on:** July 21, 2010, 01:52:13 PM »

Quote from: Passenger on July 21, 2010, 11:48:14 AM

Lol, I missed a crack in the bore? And that caused the sleeve to swell .017"?
I'm gonna call this guy today.

Benson basically said we both suck,lol

Passenger · « **Reply #1335 on:** July 21, 2010, 01:59:48 PM »

I know lol, Tom send those fucking sunglasses back.

Passenger · « **Reply #1336 on:** July 21, 2010, 02:00:43 PM »

Nevermind just got your pm

Joseph Davis · « **Reply #1337 on:** July 21, 2010, 02:05:21 PM »

Quote from: bigdaddyvtec on July 21, 2010, 01:49:19 PM

The topic here is that the sleeves failed, weather or not its MFG

That's exactly my point, you keep pegging Darton for this.

Is it Honda's fault as a MFG if someone tries to make 400 whp on a stock D15 rod? Wrong part for the application, it's the guy who picked that part's major fucking malfunction. Darton flanged sleeves are AWESOME in streetcar turbo builds that would risk a stock sleeve, and NA applications.

Quote from: bigdaddyvtec on July 21, 2010, 01:49:19 PM

DOnt you have a block to go weld up to be in the club???

Quit pointing out my inadequacies. Do you really want me to cry twice in the same day?

bigdaddyvtec · « **Reply #1338 on:** July 21, 2010, 02:06:24 PM »

Im going to make sweet love to your face with you 3000 miles away tonight princess.

LOL

Urban Indian · « **Reply #1339 on:** July 22, 2010, 04:21:02 PM »

I had thought about picking up this ITR block for sale locally that has benson sleeves in it but now I am just going to say to hell with it. Not supporting that man anymore. Pick up a new block and get a set of sleeves from GE or AEBS for 8 bills

dvst8r · « **Reply #1340 on:** July 22, 2010, 04:36:35 PM »

Quote from: Urban Indian on July 22, 2010, 04:21:02 PM

I had thought about picking up this ITR block for sale locally that has benson sleeves in it but now I am just going to say to hell with it. Not supporting that man anymore. Pick up a new block and get a set of sleeves from GE or AEBS for 8 bills

What did WTM's sleeves cost?

runsfromdacops · « **Reply #1341 on:** July 22, 2010, 05:20:48 PM »

ge raised there prices alot. i dont think you can get a block done for that cheap any more.

bigdaddyvtec · « **Reply #1342 on:** July 22, 2010, 05:22:54 PM »

1050 shipped H22block.

d112crzy · « **Reply #1343 on:** July 22, 2010, 07:53:19 PM »

I'd personally go with erl Only Because the GE rep pisses me off

Urban Indian · « **Reply #1344 on:** July 22, 2010, 07:59:43 PM »

Quote from: runsfromdacops on July 22, 2010, 05:20:48 PM

ge raised there prices alot. i dont think you can get a block done for that cheap any more.

I know nigs who know nigs

Joseph Davis · « **Reply #1345 on:** July 22, 2010, 08:00:44 PM »

Quote from: Urban Indian on July 22, 2010, 07:59:43 PM

Quote from: runsfromdacops on July 22, 2010, 05:20:48 PM
ge raised there prices alot. i dont think you can get a block done for that cheap any more.

I know nigs who know nigs

Not to mention you aren't too white yourself, pretty boy.

Passenger · « **Reply #1346 on:** July 23, 2010, 12:33:00 AM »

Quote from: Urban Indian on July 22, 2010, 07:59:43 PM

Quote from: runsfromdacops on July 22, 2010, 05:20:48 PM
ge raised there prices alot. i dont think you can get a block done for that cheap any more.

I know nigs who know nigs

Bitch please, if that was true I would of had a new case weeks ago.

dvst8r · « **Reply #1347 on:** July 23, 2010, 10:44:08 AM »

Quote from: Passenger on July 21, 2010, 11:48:14 AM

Lol, I missed a crack in the bore? And that caused the sleeve to swell .017"?
I'm gonna call this guy today.

So where is the call recording for lol's?

Passenger · « **Reply #1348 on:** July 23, 2010, 12:50:38 PM »

Benson won't answer the phone, I haven't come up with anything to record with anyways.

Urban Indian · « **Reply #1349 on:** July 23, 2010, 03:16:59 PM »

Quote from: Passenger on July 23, 2010, 12:33:00 AM

Quote from: Urban Indian on July 22, 2010, 07:59:43 PM
Quote from: runsfromdacops on July 22, 2010, 05:20:48 PM
ge raised there prices alot. i dont think you can get a block done for that cheap any more.

I know nigs who know nigs

Bitch please, if that was true I would of had a new case weeks ago.

Have business stuff that is taking priority right now

News:

Author Topic: UI's 703hp Purple beast - She is injured (Read 267453 times)