Topic: UI's 703hp Purple beast - She is injured (Read 323937 times)

Urban Indian · « **Reply #30 on:** April 24, 2009, 02:51:47 PM »

Quote from: dvst8r on April 24, 2009, 10:27:20 AM

Are you going to put the carpet and dash back in?

Is it getting a cage?

Dash and stuff is going back in this weekend after I finish installing my coil.

And the only reason the car sat on the trailer is because I smashed the rod bearings in it. So it wasnt going to live unless it sat on the trailer until the hmt meet.

I drive my car everyday, whenever possible.

dvst8r · « **Reply #31 on:** April 24, 2009, 06:16:44 PM »

Quote from: dvst8r on April 24, 2009, 10:27:20 AM

Is it getting a cage?

Urban Indian · « **Reply #32 on:** April 24, 2009, 11:13:30 PM »

Quote from: dvst8r on April 24, 2009, 06:16:44 PM

Quote from: dvst8r on April 24, 2009, 10:27:20 AM
Is it getting a cage?

Not unless your going to pay for it.

Maybe next year

BoostForLife · « **Reply #33 on:** April 24, 2009, 11:53:52 PM »

You pretty much pushed the limit at Pacific Raceways on the LS without the cage. A little bit faster and you would have got kicked off the track.

d-rail · « **Reply #34 on:** April 25, 2009, 08:12:18 AM »

http://artmorrison.com/layout.php?y=rollcage/&x=racebars

Their you go for a cage. You can sell your cousin/girlfriends ass and pay for it quick. Be safe not stupid and cheap.

Passenger · « **Reply #35 on:** April 25, 2009, 02:44:04 PM »

Well I got the bottom end disassembled, will bore and hone this week, Cylinder head is completely stripped, cleaned and guides punched out,, will port early this week, waiting on new guides and valves from the indian chief. Thinking reassembly for next weekend, shouldn't be too much of a problem.

Pre fabbed cages are shit.

highroller54 · « **Reply #36 on:** April 25, 2009, 02:47:15 PM »

Quote from: Passenger on April 25, 2009, 02:44:04 PM

Pre fabbed cages are shit.

I need one of your cages.

Passenger · « **Reply #37 on:** April 25, 2009, 02:48:43 PM »

Quote from: highroller54 on April 25, 2009, 02:47:15 PM

Quote from: Passenger on April 25, 2009, 02:44:04 PM

Pre fabbed cages are shit.

I need one of your cages.

I need your skrillaz

highroller54 · « **Reply #38 on:** April 25, 2009, 03:14:09 PM »

Quote from: Passenger on April 25, 2009, 02:48:43 PM

Quote from: highroller54 on April 25, 2009, 02:47:15 PM
Quote from: Passenger on April 25, 2009, 02:44:04 PM

Pre fabbed cages are shit.

I need one of your cages.

I need your skrillaz

soon enough, lol.

danz · « **Reply #39 on:** April 25, 2009, 08:25:03 PM »

Quote from: 88dx on April 24, 2009, 02:10:37 AM

Quote from: danz on April 24, 2009, 02:09:15 AM
MRP fo lyyyfe.

i heard its actually going to be open tomorrow. fresh pavement.

where the fuck are my isky springs.

looks good indian hope this one turns out good for ya.
yeah I was going to go and watch a buddy race but instead ill be camping and drinking to much

did your buddy happen to crack a sleeve? i know something didnt go right. heh

Urban Indian · « **Reply #40 on:** April 27, 2009, 11:50:59 AM »

A progress report. I put the stock lip back on with 3 bolts and a whole lot of zip ties. I am going to glue the front piece of the lip to whats left of the bumper. I went to home depot to buy the DIY lip, but then decided that I liked the stock lip more.

stickers arrived

Painted the front end of the car flat black so that its not so visible

Coil

Interior that the car hasnt seen in ALOT of months

Found this plate in the glove box( I was wondering why it was so fucking heavy. Cut the tabs off and threw that plate out

Fixing some sketchy wiring I had. Going from 4ga to 8ga without a torch

Painted Intercooler

Finishing the bracket

Cut the ends off and put a sticker up on that hoe ( idea of my grandpa)

Passenger · « **Reply #41 on:** April 27, 2009, 05:51:49 PM »

Quote from: danz on April 25, 2009, 08:25:03 PM

Quote from: 88dx on April 24, 2009, 02:10:37 AM
Quote from: danz on April 24, 2009, 02:09:15 AM
MRP fo lyyyfe.

i heard its actually going to be open tomorrow. fresh pavement.

where the fuck are my isky springs.

looks good indian hope this one turns out good for ya.
yeah I was going to go and watch a buddy race but instead ill be camping and drinking to much

did your buddy happen to crack a sleeve? i know something didnt go right. heh

Is this Dan from Roto?

Levi, I like the black tanks.

bigdaddyvtec · « **Reply #42 on:** April 27, 2009, 05:53:22 PM »

fucking forgot to paint the core you prarielovingcornholer.

LIGHT coat. Tanks look good, but it looks gay stil. I thought you were going to do the whole thing???

Passenger · « **Reply #43 on:** April 27, 2009, 08:08:29 PM »

The bumper looks brutal.

Urban Indian · « **Reply #44 on:** April 27, 2009, 08:44:07 PM »

I just finished gluing the stock lip back on. I bought some chicken mesh stuff I am going to put in the bumper as inserts. We will see how it goes. My friend has some SS mesh they use at the mill's in town and it has circle holes in it. Will see how it looks tomorrow. I will post up Pictures and you can decide what to go with

Passenger · « **Reply #45 on:** April 27, 2009, 09:01:54 PM »

Quote from: Urban Indian on April 27, 2009, 08:44:07 PM

I just finished gluing the stock lip back on. I bought some chicken mesh stuff I am going to put in the bumper as inserts. We will see how it goes. My friend has some SS mesh they use at the mill's in town and it has circle holes in it. Will see how it looks tomorrow. I will post up Pictures and you can decide what to go with

How about you send me some valves and guides so I can finish your head instead

Speaking of that, do I gotta still have this thing done this weekend or can it be next weekend now?

Conceptz-X · « **Reply #46 on:** April 27, 2009, 09:32:56 PM »

That HVC 2 coil is a bad mother fucker, run one on the wife's car, it made me dance once and never again.

Urban Indian · « **Reply #47 on:** April 28, 2009, 11:38:56 PM »

Got my hubs and studs all ready for install

Stainless mesh i am going to bolt in tomorrow

Kinda what it might look like. Paint it?

Minor Threat · « **Reply #48 on:** April 28, 2009, 11:52:52 PM »

You're fucked either way that bumper is haggard.

Just paint the whole IC black.

dvst8r · « **Reply #49 on:** April 29, 2009, 12:12:24 AM »

If your gonna run the mesh, paint it black.

You really need to goto the jy and pick up another bumper and re-cut.

Passenger · « **Reply #50 on:** April 29, 2009, 12:37:07 AM »

Quote from: dvst8r on April 29, 2009, 12:12:24 AM

If your gonna run the mesh, paint it black.

You really need to goto the jy and pick up another bumper and re-cut.

Wurd.

Urban Indian · « **Reply #51 on:** April 29, 2009, 02:10:29 AM »

maybe later

for now

Lick my shit brett

ApexSilver06MR · « **Reply #52 on:** April 29, 2009, 02:40:40 AM »

paint that shit black....

it will be fine

BoostForLife · « **Reply #53 on:** April 29, 2009, 03:01:35 AM »

Just painted my IC black tonight, looks fucking awesome and sleeper.

You should at least paint the grill, but even then the IC will still stick out.

bigdaddyvtec · « **Reply #54 on:** April 29, 2009, 03:04:56 AM »

Quote from: Minor Threat on April 28, 2009, 11:52:52 PM

You're fucked either way that bumper is haggard.

Just paint the whole IC black.

x blue dash

trevor72 · « **Reply #55 on:** April 29, 2009, 01:34:02 PM »

I don't like the stainless mesh as is unfinished, painted black maybe. I also think this car is far from sleeper, so I don't mind the look of the open IC. My vote is chicken wire painted black that covers the fog light holes and open front. But do what makes you happy and then make a plan with a new bumper for next year!

Sinister · « **Reply #56 on:** April 29, 2009, 02:38:18 PM »

Quote from: rawr on April 29, 2009, 09:55:13 AM

Get rid of that fast and furious mesh shit.

+1. Or atleast paint it black.

Urban Indian · « **Reply #57 on:** April 29, 2009, 04:00:02 PM »

poll in GD about the bumper

danz · « **Reply #58 on:** April 30, 2009, 12:59:20 AM »

Quote from: Passenger on April 27, 2009, 05:51:49 PM

Quote from: danz on April 25, 2009, 08:25:03 PM
Quote from: 88dx on April 24, 2009, 02:10:37 AM
Quote from: danz on April 24, 2009, 02:09:15 AM
MRP fo lyyyfe.

i heard its actually going to be open tomorrow. fresh pavement.

where the fuck are my isky springs.

looks good indian hope this one turns out good for ya.
yeah I was going to go and watch a buddy race but instead ill be camping and drinking to much

did your buddy happen to crack a sleeve? i know something didnt go right. heh

Is this Dan from Roto?

Levi, I like the black tanks.

Dan from Altrom. i gotta check out your shop one day. u should buy shit from us. fuck woldpac.

Urban Indian · « **Reply #59 on:** April 30, 2009, 02:50:38 AM »

Fixed some sketchy wiring

Wired up the coil. Put some liquid electrical tape on the ends so that if anything touches the ends, it does not = instant fire

News:

Author Topic: UI's 703hp Purple beast - She is injured (Read 323937 times)

BoostForLife

BoostForLife