Topic: project widow (Read 8282 times)

EG-MIKE · « **on:** May 09, 2013, 12:57:39 PM »

so this is the new platform. my girl and i picked this up a few months back and she has decided to allow me to convert it to a 5 speed and boost it smoochie boochie, bitchez smoochie boochie, bitchez.

its a 94 del sol s it has 145k on it and was owned by one lady its whole existence and she took very good care of it. has very minor rust and thats not for long.

the setup:

95ex/si trans ( the bigger bearing one, B000? )
b7 bottom end
b7 head
z6 intake mani
cast mani t3 flange
6262 knock off / also got a gt17
rc 550cc injectors
comp clutch stage 4 kit ( sprung )
innovate lc-1 wideband with gauge
vac/boost gauge
oil pressure gauge
chipped and converted p06 ecu gonna be tuned on crome
2.5" intercooler piping
hks ssqv knock off

things still needed:

4 bar map ( gonna hit up HIPROFILE for that )
arp head studs
a larger intercooler
smaller turbo looking for small-medium sized t3 with decent spool and pull to redline

should start work soon and i plan on doing the 5spd swap and turbo install on a weekend, just need a couple last parts.

ratcityrex · « **Reply #1 on:** May 09, 2013, 01:30:28 PM »

Pretty clean sol.

EG-MIKE · « **Reply #2 on:** May 09, 2013, 06:55:03 PM »

Quote from: ratcityrex on May 09, 2013, 01:30:28 PM

Pretty clean sol.

thanks bro, its by far the cleanest honda my girl and i have owned.

i'll be putting the rims on soon, doing the 5 spd swap and boosting it. can't wait!! just incase anyone is wondering why its called project widow that should be come clear once the paint theme is done

ratcityrex · « **Reply #3 on:** May 09, 2013, 07:13:37 PM »

Ive always had a thing for del sol's. My uncle bought one in 1994. He bought the vtec model because it had more horsepower. He had to wait 2 months, because when he bought it the factory hadn't even made one with a dohc vtec yet. Needless to say he was the only one in town with a stock dohc delsol. Was a lot of fun.

EG-MIKE · « **Reply #4 on:** May 09, 2013, 07:56:55 PM »

nice. the vtec model was a well put together car for stock. i still love my D series tho, its just the awe factor i guess. when ppl see your car run down the track and they think its got a typical swap with a turbo, then you tell them your running a D15 or D16 and they dont believe it till you show them. i love that feeling

my girls gonna end up putting a H or K in this when we come across one for the right price. till then i get to do what i please.

ratcityrex · « **Reply #5 on:** May 09, 2013, 10:18:03 PM »

I would go k or f series.... F for the budget, k for the ballerness

EG-MIKE · « **Reply #6 on:** May 09, 2013, 10:31:36 PM »

when we put a swap in it for her i was thinking of the F/H build. the f22 bottom end and h22 top end possibly throw a SC on her and call it a day. my girl will be more then happy with like 300ish whp

Joseph Davis · « **Reply #7 on:** May 09, 2013, 11:30:38 PM »

Post pics of your old lady, please?

PhilStubbs · « **Reply #8 on:** May 10, 2013, 06:46:27 AM »

Quote from: Joseph Davis on May 09, 2013, 11:30:38 PM

Post pics of your old lady, please?

EG-MIKE · « **Reply #9 on:** May 10, 2013, 06:53:51 PM »

once we start working on the sol ill post some pics of the fiance up.

also JD you should come up to maine and tune my car haha. i'd come down there but i think atmospheric pressures would be too different for a really effective tune up here.

highroller54 · « **Reply #10 on:** May 16, 2013, 03:56:39 PM »

thats all going to depend on the quality of your pics and your willingness to share, or at least go out of the house for a 1/2 hour.

PhilStubbs · « **Reply #11 on:** May 17, 2013, 08:32:44 AM »

1/2 an hour? Is he going to talk to her for 29min first? He just needs to run out to the shed

EG-MIKE · « **Reply #12 on:** May 17, 2013, 10:47:15 PM »

Small update:

Prepped and painted the rims off my hatch build also painted the emblems too match. Will post pics up later, been a long day

EG-MIKE · « **Reply #13 on:** May 18, 2013, 10:27:56 PM »

heres a lil sneak peak

ratcityrex · « **Reply #14 on:** May 19, 2013, 01:31:57 AM »

wheels look horrible..... strip it and paint it cast grey like they were from the factory

EG-MIKE · « **Reply #15 on:** May 19, 2013, 07:13:11 PM »

Quote from: ratcityrex on May 19, 2013, 01:31:57 AM

wheels look horrible..... strip it and paint it cast grey like they were from the factory

thanks, lol. i think you'd have to see them in person, as soon as i put them on and drove home i had a kid up the street ask if i wanted to sell them. plus i get alot of positive attention around my area, everyone i know say's it looks great

turbohf · « **Reply #16 on:** May 19, 2013, 11:13:32 PM »

Quote from: ratcityrex on May 19, 2013, 01:31:57 AM

wheels look horrible..... strip it and paint it cast grey like they were from the factory

PhilStubbs · « **Reply #17 on:** May 20, 2013, 02:37:06 PM »

Quote from: turbohf on May 19, 2013, 11:13:32 PM

Quote from: ratcityrex on May 19, 2013, 01:31:57 AM
wheels look horrible..... strip it and paint it cast grey like they were from the factory

This

Lots of people have horrible taste in wheels, you just happened to find those people.

Tim · « **Reply #18 on:** May 20, 2013, 10:37:52 PM »

Quote from: PhilStubbs on May 20, 2013, 02:37:06 PM

Quote from: turbohf on May 19, 2013, 11:13:32 PM
Quote from: ratcityrex on May 19, 2013, 01:31:57 AM
wheels look horrible..... strip it and paint it cast grey like they were from the factory

This

Lots of people have horrible taste in wheels, you just happened to find those people.

Wtf are you pissing with painting wheels before your boost project anyway?

rawr · « **Reply #19 on:** May 21, 2013, 12:28:46 AM »

Quote from: EG-MIKE on May 18, 2013, 10:27:56 PM

heres a lil sneak peak

Mexican detected

EG-MIKE · « **Reply #20 on:** May 21, 2013, 02:16:28 PM »

Quote from: rawr on May 21, 2013, 12:28:46 AM

Quote from: EG-MIKE on May 18, 2013, 10:27:56 PM
heres a lil sneak peak

Mexican detected

clearly im a mexi-can't haha

PhilStubbs · « **Reply #21 on:** May 21, 2013, 04:07:26 PM »

I just don't comprehend painting oem wheels weird colors.

Joseph Davis · « **Reply #22 on:** June 13, 2013, 06:48:58 AM »

Not to be yet another dick on the pile of dicks burying you, but you say you get a lot of positive attention over the wheels... from men, correct? Definitely time to strip them amd go cast grey.

EG-MIKE · « **Reply #23 on:** August 08, 2013, 09:02:48 PM »

update:

sorry i havent posted anything, a couple of months ago i had a tiny shiver of metal go threw my left eye. i lost pretty much all my vision out of it and havent been doing much besides resting and working trying to catch up with bill's. im finally starting to feel better, enough so where im ready to put in some work. im getting like 2-3 turbo's within the next couple of weeks and then i will have a choice of 4 turbo's to choose which i want to use. i need to save up some cash to order a complete exhaust, roll of brake line, map sensor, misc. odds and ends.

my goal: 170-200ish WHP with decent spool time, and able to breath up top still. im hoping to hit 13's on slicks. ( ill choose the best turbo for the job according to my goals, once i have acquired them all. )

NoPistons! · « **Reply #24 on:** August 08, 2013, 11:04:44 PM »

Bet that felt good. Shit.... Get back to work soon.

EG-MIKE · « **Reply #25 on:** August 08, 2013, 11:54:32 PM »

Quote from: NoPistons! on August 08, 2013, 11:04:44 PM

Bet that felt good. Shit.... Get back to work soon.

yeah it felt awesome, luckily the last layer on the back of my eye stopped it before it hit my brain. will start building soon as i got the snails situated

Joseph Davis · « **Reply #26 on:** August 09, 2013, 12:53:54 PM »

Wow. Glad you're still sucking air with the rest of us, bro.

EG-MIKE · « **Reply #27 on:** August 10, 2013, 07:30:44 PM »

Quote from: Joseph Davis on August 09, 2013, 12:53:54 PM

Wow. Glad you're still sucking air with the rest of us, bro.

thanks bro, things could be worse i guess lol.

idk whats been going on lately but im coming across so many turbo's for good prices. i have no clue which one ill even use at this point lol

EG-MIKE · « **Reply #28 on:** August 23, 2013, 01:39:57 AM »

update:

traded my old turbo for a BNIB gt1752s. looks likethis is the turbo ill deff be going with.

parts needed:

ARP head studs
cometic head gasket
y8 intake mani
2+bar map sensor
hf mani to gt17 flange
larger FMIC
misc. nuts and bolts
full 2.5" exhaust
downpipe

PhilStubbs · « **Reply #29 on:** November 06, 2013, 12:48:21 AM »

You need a y8 intake about as bad as your car needs those ugly ass red wheels. Z6 or GTFO!!!

News:

Author Topic: project widow (Read 8282 times)