:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: crxvtec91 on February 11, 2010, 08:01:55 PM
-
Has any one seen a manifold done like this before;
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg301.imageshack.us%2Fimg301%2F3181%2Fimg4447y.jpg&hash=10b0abe5e9f1a6b8dd9494e14bd3021d500502f0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg263.imageshack.us%2Fimg263%2F6381%2Fimg4451g.jpg&hash=774c2ec7e67973c3b412a257b4a26d8a63803d6c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg196.imageshack.us%2Fimg196%2F8439%2Fimg4448q.jpg&hash=bb8079c7757834e16dac3834c577ad06ce5a9785)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg301.imageshack.us%2Fimg301%2F8867%2Fimg4449q.jpg&hash=29695e01eb464f5f26f7a1efa96b3e8e5eb773bd)
"designed some manifolds in Solid Edge (3d Cad Software)"
The collector part is what caught my eye, looks super easy that way.
-
Thats pretty slick, b nice for someone like me that doesnt have much experience in making them
-
well if you have the tools to cut a collector making a jig to hold a pipe at a given angle really shouldn't be to hard. It looks cool, but more work then i would do for a simple manifold.
-
i have always eyeballed them for design. i take measurements as needed, but no plans or anything. i wish i could do shit like that though
-
who has time to draw these up? i sure don't. a cage, yeah, it is probably worth it, but a manifold, i don't see the need. nice work though.
-
cool someone draw me up one for a 3 banger.
-
cool someone draw me up one for a 3 banger.
Geo metro?
-
if you need a diagram to build a manifold, you shouldnt be trying to build a manifold.
-
if you need a diagram to build a manifold, you shouldnt be trying to build a manifold.
This pretty much sums it up. I have made notes in the past, and i do put guid bars on jigs for manifolds like the rb25 one i made. but i do not require a cad drawing. It looks more like a nerd who was bored.
-
The collector wrappers are nice but if you can't jig them properly whats the point of the whole thing?
if you need a diagram to build a manifold, you shouldnt be trying to build a manifold.
/thread.
-
i didnt notice the collector templates, that would be nice for a manifold you are only going to make once. any more than that, a jig is easy
-
cool someone draw me up one for a 3 banger.
Geo metro?
motor with 1 bad piston?
-
what we need is a DIY thread on making a jig to mass produce nog manifolds, not just the collector.
-
oh i could post a jig. there less complicated then some think. It's just 2 plates with some rod welded between the two. then if needed i weld on some guide rods to quide the runners a certain way.
-
yeah, jigs are easy if you have the plates! matt knows!
-
cool someone draw me up one for a 3 banger.
Geo metro?
rotax 4tec
-
link to original thread?
-
link to original thread?
No noob post, no linky linky.
-
link to original thread?
No noob post, no linky linky.
better?
-
Search my build thread.............COPY FUCKIN CAT...EVILLE140 is the man with that style.....Just needs a repatching after 400 WHP and 20 mile pulls
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi286.photobucket.com%2Falbums%2Fll90%2Fwidebody93%2Fth_103_1599.jpg&hash=861aef7c9958b6128df10c67c0f73306c3bc12b9) (http://s286.photobucket.com/albums/ll90/widebody93/?action=view¤t=103_1599.flv)
-
Search my build thread.............COPY FUCKIN CAT...EVILLE140 is the man with that style.....Just needs a repatching after 400 WHP and 20 mile pulls
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi286.photobucket.com%2Falbums%2Fll90%2Fwidebody93%2Fth_103_1599.jpg&hash=861aef7c9958b6128df10c67c0f73306c3bc12b9) (http://s286.photobucket.com/albums/ll90/widebody93/?action=view¤t=103_1599.flv)
uhhh we all knew evilles mani looked like it... no one cared, that style has been around longer than your mommas cooter. Its hardly a copy of yours...Thats about he easiest manifold to build And because I'm an intellectual being, a log, hence why he probably went that route with your fail... to get you as far away as possible as quickly as practical.
-
Lol at you clowns thinking building a manifold from a print is easier than free handing it. I'd like to see any of you hold even .060" over 20" on a multiple tube assembly. ::)
-
cool someone draw me up one for a 3 banger.
That would be a little lop-sided... Just make it for half a i-6, or get a real motor. :P
-
SSAC man horn?
-
lol cad is fun when making mani's
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi62.photobucket.com%2Falbums%2Fh98%2Fkamilk69%2Fmanifold_5-1.jpg%3Ft%3D1266542282&hash=75037306c8f6a37cead4e79228f459e8c1c5fdb1)
-
To bad that is ugly as fuck. :?:
-
hahahaha
-
Doesn't look horrible. The whole solid model -> sheet metal -> flat pattern 1:1 scale CAD trick works really well for tube copes. You can build a cage that fits perfectly with nothing more than an angle grinder. Of course, most of us on here could do that anyways without the flat pattern :P
-
Brian your a fucking dildo pole dancer....... Randy spent whole day 16hrs to be exact on makin my mani, dp, and full 3in exhaust all tig welded and V banded..... I'm actually waiting to get my twin disc and then drop off the hatch to him and have a front mount made with a larger wastegate cause a 38mm gate is just too fuckin small..Boost creep..nigggga what!
-
thats a retarded ramhorn with herpesaids.
nice job constructing something about as enjoyable to look at as buk9s hairy afganistan asshole
-
Search my build thread.............COPY FUCKIN CAT...EVILLE140 is the man with that style.....Just needs a repatching after 400 WHP and 20 mile pulls
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi286.photobucket.com%2Falbums%2Fll90%2Fwidebody93%2Fth_103_1599.jpg&hash=861aef7c9958b6128df10c67c0f73306c3bc12b9) (http://s286.photobucket.com/albums/ll90/widebody93/?action=view¤t=103_1599.flv)
shut the fuck up nigger. i mnade a manifold that mirrors that back in like 03. before u even knew what a turbo was u fucking scrotbulge