Topic: Making a mani (Read 10825 times)

crxvtec91 · « **on:** February 11, 2010, 08:01:55 PM »

Has any one seen a manifold done like this before;

"designed some manifolds in Solid Edge (3d Cad Software)"

The collector part is what caught my eye, looks super easy that way.

The_Fatman81 · « **Reply #1 on:** February 11, 2010, 08:09:34 PM »

Thats pretty slick, b nice for someone like me that doesnt have much experience in making them

turbob16hatch · « **Reply #2 on:** February 11, 2010, 08:14:38 PM »

well if you have the tools to cut a collector making a jig to hold a pipe at a given angle really shouldn't be to hard. It looks cool, but more work then i would do for a simple manifold.

PhilStubbs · « **Reply #3 on:** February 11, 2010, 08:45:34 PM »

i have always eyeballed them for design. i take measurements as needed, but no plans or anything. i wish i could do shit like that though

weirtech · « **Reply #4 on:** February 11, 2010, 10:08:39 PM »

who has time to draw these up? i sure don't. a cage, yeah, it is probably worth it, but a manifold, i don't see the need. nice work though.

ADSR · « **Reply #5 on:** February 11, 2010, 11:15:05 PM »

cool someone draw me up one for a 3 banger.

Phate · « **Reply #6 on:** February 12, 2010, 02:34:22 AM »

Quote from: ADSR on February 11, 2010, 11:15:05 PM

cool someone draw me up one for a 3 banger.

Geo metro?

Corey · « **Reply #7 on:** February 12, 2010, 02:42:17 AM »

if you need a diagram to build a manifold, you shouldnt be trying to build a manifold.

turbob16hatch · « **Reply #8 on:** February 12, 2010, 04:40:45 AM »

Quote from: Corey on February 12, 2010, 02:42:17 AM

if you need a diagram to build a manifold, you shouldnt be trying to build a manifold.

This pretty much sums it up. I have made notes in the past, and i do put guid bars on jigs for manifolds like the rb25 one i made. but i do not require a cad drawing. It looks more like a nerd who was bored.

CSaddict · « **Reply #9 on:** February 12, 2010, 06:55:21 AM »

The collector wrappers are nice but if you can't jig them properly whats the point of the whole thing?

Quote from: Corey on February 12, 2010, 02:42:17 AM

if you need a diagram to build a manifold, you shouldnt be trying to build a manifold.

/thread.

PhilStubbs · « **Reply #10 on:** February 12, 2010, 07:54:10 AM »

i didnt notice the collector templates, that would be nice for a manifold you are only going to make once. any more than that, a jig is easy

t_cel_t · « **Reply #11 on:** February 12, 2010, 04:31:19 PM »

Quote from: Phate on February 12, 2010, 02:34:22 AM

Quote from: ADSR on February 11, 2010, 11:15:05 PM
cool someone draw me up one for a 3 banger.

Geo metro?

motor with 1 bad piston?

danz · « **Reply #12 on:** February 12, 2010, 06:44:51 PM »

what we need is a DIY thread on making a jig to mass produce nog manifolds, not just the collector.

turbob16hatch · « **Reply #13 on:** February 12, 2010, 07:05:41 PM »

oh i could post a jig. there less complicated then some think. It's just 2 plates with some rod welded between the two. then if needed i weld on some guide rods to quide the runners a certain way.

weirtech · « **Reply #14 on:** February 12, 2010, 08:14:45 PM »

yeah, jigs are easy if you have the plates! matt knows!

ADSR · « **Reply #15 on:** February 12, 2010, 09:54:34 PM »

Quote from: Phate on February 12, 2010, 02:34:22 AM

Quote from: ADSR on February 11, 2010, 11:15:05 PM
cool someone draw me up one for a 3 banger.

Geo metro?

rotax 4tec

jay · « **Reply #16 on:** February 13, 2010, 01:30:54 AM »

link to original thread?

malichite · « **Reply #17 on:** February 13, 2010, 01:58:14 AM »

Quote from: jay on February 13, 2010, 01:30:54 AM

link to original thread?

No noob post, no linky linky.

jay · « **Reply #18 on:** February 13, 2010, 02:17:03 AM »

Quote from: malichite on February 13, 2010, 01:58:14 AM

Quote from: jay on February 13, 2010, 01:30:54 AM
link to original thread?

No noob post, no linky linky.

better?

widebody93 · « **Reply #19 on:** February 13, 2010, 06:10:24 AM »

Search my build thread.............COPY FUCKIN CAT...EVILLE140 is the man with that style.....Just needs a repatching after 400 WHP and 20 mile pulls

bigdaddyvtec · « **Reply #20 on:** February 13, 2010, 03:31:47 PM »

Quote from: widebody93 on February 13, 2010, 06:10:24 AM

Search my build thread.............COPY FUCKIN CAT...EVILLE140 is the man with that style.....Just needs a repatching after 400 WHP and 20 mile pulls

uhhh we all knew evilles mani looked like it... no one cared, that style has been around longer than your mommas cooter. Its hardly a copy of yours...Thats about he easiest manifold to build And because I'm an intellectual being, a log, hence why he probably went that route with your fail... to get you as far away as possible as quickly as practical.

Passenger · « **Reply #21 on:** February 13, 2010, 03:39:48 PM »

Lol at you clowns thinking building a manifold from a print is easier than free handing it. I'd like to see any of you hold even .060" over 20" on a multiple tube assembly.

HiProfile · « **Reply #22 on:** February 14, 2010, 05:54:11 AM »

Quote from: ADSR on February 11, 2010, 11:15:05 PM

cool someone draw me up one for a 3 banger.

That would be a little lop-sided... Just make it for half a i-6, or get a real motor.

speedjunky01 · « **Reply #23 on:** February 17, 2010, 10:53:43 AM »

SSAC man horn?

kamilk69 · « **Reply #24 on:** February 18, 2010, 09:18:58 PM »

lol cad is fun when making mani's

turbob16hatch · « **Reply #25 on:** February 18, 2010, 09:36:07 PM »

To bad that is ugly as fuck.

Rosario4124 · « **Reply #26 on:** February 19, 2010, 08:56:46 AM »

hahahaha

Colin · « **Reply #27 on:** February 21, 2010, 12:33:32 PM »

Doesn't look horrible. The whole solid model -> sheet metal -> flat pattern 1:1 scale CAD trick works really well for tube copes. You can build a cage that fits perfectly with nothing more than an angle grinder. Of course, most of us on here could do that anyways without the flat pattern

widebody93 · « **Reply #28 on:** February 27, 2010, 06:05:41 PM »

Brian your a fucking dildo pole dancer....... Randy spent whole day 16hrs to be exact on makin my mani, dp, and full 3in exhaust all tig welded and V banded..... I'm actually waiting to get my twin disc and then drop off the hatch to him and have a front mount made with a larger wastegate cause a 38mm gate is just too fuckin small..Boost creep..nigggga what!

hotrex · « **Reply #29 on:** February 28, 2010, 05:22:18 PM »

thats a retarded ramhorn with herpesaids.

nice job constructing something about as enjoyable to look at as buk9s hairy afganistan asshole

News:

Author Topic: Making a mani (Read 10825 times)

Colin