:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: schim187 on February 27, 2010, 11:42:28 PM
-
SO, had a guy at work ask if i could pull the 6.9L Diesel Ford and install a 7.3L that he picked up for some outrageous price out of a UHaul that had rolled....doing the swap tonight, had to change motor mounts and oil cooler, as I pulled off oil cooler, i noticed no water but all oil. Looked in the port for the antifreeze and saw chunks of metal, removed oil pan and found this in the oil pan...
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv338%2Fsteveschimmel%2FDSC00702.jpg&hash=482ae07c823e0ed6fde038bdaefc38b983cea59b)
First thing i noticed was the large wrist pin...
continued to investigate and pulled this out
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv338%2Fsteveschimmel%2FDSC00698.jpg&hash=c310601285b4350ec6c1afbd6252f1ebb4ab7f76)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv338%2Fsteveschimmel%2FDSC00699.jpg&hash=77df72b22551c4b566374c7f4597b6aba3193907)
Piston Fragged
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv338%2Fsteveschimmel%2FDSC00703.jpg&hash=ffbd8a189b8ab468428fa5f4b49bd93ba6ea1bf1)
Cylinder wall...yah, thats a crack
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv338%2Fsteveschimmel%2FDSC00705.jpg&hash=c5e3d0d3245b48aefecd3b78a9f8d94e4a3c5129)
SO, now this guy i work with wants me to put the original 6.9L back in, and he's out the 2 Grand he paid for the motor plus the money he owes me for my time invested...bummer
Thought i'd share with you guys lol :yes:
-
holy shit!! Was the rod sitting in the pan?
jesus!!!
-
Bwahahhahahaaahahahaaaaa.
-
That rod is front page material.
-
Whoa sorry didn't mean to make the pix so big...nah, rod was still kinda in place...not sure if it overheated, broke the cylinder wall, then piston, either way its a boat anchor now...
note: drain oil before installin/ pullin old motor...save ya a few hours
-
what could they possibly have done to have it damage like this. ???
-
what could they possibly have done to have it damage like this. ???
i'm putting my money on hydrolock
-
Whoa sorry didn't mean to make the pix so big...nah, rod was still kinda in place...not sure if it overheated, broke the cylinder wall, then piston, either way its a boat anchor now...
note: drain oil before installin/ pullin old motor...save ya a few hours
When the pic is this awesome the bigger the better.
-
Really sucks for that guy.
-
The motor probably was fine until you undertorqued one of the oil pan bolts when you were inspecting the bottom end, resulting in the damage in the photographs.
-
Ud have to be a fucking retarded Canadian to buy a Ford diesel :?:
-
The motor probably was fine until you undertorqued one of the oil pan bolts when you were inspecting the bottom end, resulting in the damage in the photographs.
FUCK YOUU
-
HAHA LOL I think it overheated to the point that it cracked the cylinder wall...detonated the piston...i hate fords and everything about them, this thing was a pain in the ass but the guy who owns it said it was guaranteed to run....gonna do us some Montana justice and go get the money back or tie the block to the guys leg and go throw it in a lake
-
Ud have to be a fucking retarded Canadian to buy a Ford diese :?:l
ford hasn't made a diesel til this year.
international sure does make a pile of shit.
-
I love my ford diesel :noel:
-
Ud have to be a fucking retarded Canadian to buy a Ford diesel :?:
I love my ford diesel :noel:
I can see why
-
Ud have to be a fucking retarded Canadian to buy a Ford diesel :?:
I love my ford diesel :noel:
I can see why
lol Jew
-
The motor probably was fine until you undertorqued one of the oil pan bolts when you were inspecting the bottom end, resulting in the damage in the photographs.
Theluls.
-
that rods still good O0
-
Piston looks pretty cool. Clean it up, frame it, and hang it on the wall
-
Piston looks pretty cool. Clean it up, frame it, and hang it on the wall
What piston?
-
Piston looks pretty cool. Clean it up, frame it, and hang it on the wall
What piston?
I meant rod
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv338%2Fsteveschimmel%2FDSC00702.jpg&hash=482ae07c823e0ed6fde038bdaefc38b983cea59b)
The T-1000 was hiding in the oil pan?
what could they possibly have done to have it damage like this. ???
i'm putting my money on hydrolock
This
-
That rod will be ok with minor fix ;D
-
T-1000 huh?
-
T-1000 huh?
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg684.imageshack.us%2Fimg684%2F5483%2Fdsc00702u.jpg&hash=ada004ad59c15b28e60f080672a2031e2db320ca)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ft1.gstatic.com%2Fimages%3Fq%3Dtbn%3AGgp92vbY0C9AJM%3Ahttp%3A%2F%2Frmd.com.au%2Fwp-content%2Fuploads%2F2009%2F02%2Fliquid_metal.jpg&hash=d5757a800645d4620f6ef5551638c18c73be3f5b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Faftermathnews.files.wordpress.com%2F2008%2F06%2Ft-1000-robot.jpg&hash=d404f1551b31361f1b227c5f1ac2cd57ec529870)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.goingfaster.com%2Fdarkthoughts%2Ft1000.jpg&hash=8422334cd170354415c94a34a9b8ab9e6025f1c1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.geekologie.com%2F2008%2F07%2F09%2Ft-1000.jpg&hash=4b4dda7158aae4b47be57e9c07b7c49b2a8b34f3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fupload.wikimedia.org%2Fwikipedia%2Fen%2Ff%2Ffc%2FT-1000_002.png&hash=c4c8a23b8e4225e199b7ee56712d467b79625d9a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fgoldendome.org%2Fevolutionofman%2FTerminator%2Ft1000rp.jpg&hash=193478e5c20f5006cda687c65f4ceaee21ba7029)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.nerdles.com%2Fwp-content%2Fuploads%2F2009%2F11%2FT1000.gif&hash=cd8dea5e768cf6e15ea5e1cd54620f0b499a9ea2)
-
lol, looking at those screenshots it's amazing I used to think that movie looked uber-realistic.
-
lol, looking at those screenshots it's amazing I used to think that movie looked uber-realistic.
It was state of the art at the time. Keep in mind that movie was made in 1990.
-
haha lol gotcha
-
lol, looking at those screenshots it's amazing I used to think that movie looked uber-realistic.
It was state of the art at the time. Keep in mind that movie was made in 1990.
well aware.
Haven't watched it again since the early 90s either, so this is the first time I noticed how fakish it really is :P
-
lol, looking at those screenshots it's amazing I used to think that movie looked uber-realistic.
It was state of the art at the time. Keep in mind that movie was made in 1990.
well aware.
Haven't watched it again since the early 90s either, so this is the first time I noticed how fakish it really is :P
That movie is a classic Sir and blongs in every red-blooded Americans movie collection.
We gotta go, now. They're here...
Who's here?
The police.
How many many?
Uhh...all of them I think.
-
Hah! I think I am going to watch T2 tonight.
;D
-
lol, looking at those screenshots it's amazing I used to think that movie looked uber-realistic.
It was state of the art at the time. Keep in mind that movie was made in 1990.
well aware.
Haven't watched it again since the early 90s either, so this is the first time I noticed how fakish it really is :P
That movie is a classic Sir and blongs in every red-blooded Americans movie collection.
We gotta go, now. They're here...
Who's here?
The police.
How many many?
Uhh...all of them I think.
Don't worry, it's on the media server in high definition.
Unfortunately from what I've seen they did a horrible transfer and it looks like a shitty upscale.
-
I watched T2 earlier today... Good movie!
Post pics of this Montana Justice!!
-
That rod is fucking win!!!
-
A little JB weld fix that right up. Be good as new promise O0
-
The guy asked if i did that trying to start it today. I stared at him and asked if he was serious.
Then slapped him on his bald head and ran away. :yes:
-
Sell that rod to some hipster as modern art.
-
Lol, that is one fucked up rod. My bro just flipped his truck up north and he's in a similar bind. He's not a car guy and had passengers' safey to deal with, so left the engine running sideways. He hit black ice, flipped, then another car flipped on it's roof in same spot while they were waiting.
Insurance had it towed to nearest place - one of the biggest Dodge dealers around - and they said frame is bent & engine locked. Insurance had it towed halfway across the state to another place. That place said the engine was fine and frame was fine. Proof frame is okay? This is the mechanic's EXACT words: "Well the doors close fine." Now this is newer a Dodge Ram in which the frames are known to twist just from towing near it's capacity...
I'll be sure to send him this link. I highly doubt the engine is fine.