Topic: It rolled over and they said the motor was good... (Read 11328 times)

schim187 · « **on:** February 27, 2010, 11:42:28 PM »

SO, had a guy at work ask if i could pull the 6.9L Diesel Ford and install a 7.3L that he picked up for some outrageous price out of a UHaul that had rolled....doing the swap tonight, had to change motor mounts and oil cooler, as I pulled off oil cooler, i noticed no water but all oil. Looked in the port for the antifreeze and saw chunks of metal, removed oil pan and found this in the oil pan...

First thing i noticed was the large wrist pin...

continued to investigate and pulled this out

Piston Fragged

Cylinder wall...yah, thats a crack

SO, now this guy i work with wants me to put the original 6.9L back in, and he's out the 2 Grand he paid for the motor plus the money he owes me for my time invested...bummer

Thought i'd share with you guys lol :yes:

ADSR · « **Reply #1 on:** February 27, 2010, 11:45:28 PM »

holy shit!! Was the rod sitting in the pan?

jesus!!!

snm95ls · « **Reply #2 on:** February 27, 2010, 11:50:46 PM »

Bwahahhahahaaahahahaaaaa.

bigwig · « **Reply #3 on:** February 27, 2010, 11:54:11 PM »

That rod is front page material.

schim187 · « **Reply #4 on:** February 27, 2010, 11:57:09 PM »

Whoa sorry didn't mean to make the pix so big...nah, rod was still kinda in place...not sure if it overheated, broke the cylinder wall, then piston, either way its a boat anchor now...
note: drain oil before installin/ pullin old motor...save ya a few hours

n2o_2k · « **Reply #5 on:** February 28, 2010, 12:33:54 AM »

what could they possibly have done to have it damage like this.

ADSR · « **Reply #6 on:** February 28, 2010, 12:38:14 AM »

Quote from: n2o_2k on February 28, 2010, 12:33:54 AM

what could they possibly have done to have it damage like this.

i'm putting my money on hydrolock

DmC · « **Reply #7 on:** February 28, 2010, 12:48:21 AM »

Quote from: schim187 on February 27, 2010, 11:57:09 PM

Whoa sorry didn't mean to make the pix so big...nah, rod was still kinda in place...not sure if it overheated, broke the cylinder wall, then piston, either way its a boat anchor now...
note: drain oil before installin/ pullin old motor...save ya a few hours

When the pic is this awesome the bigger the better.

Jorsher · « **Reply #8 on:** February 28, 2010, 12:53:02 AM »

Really sucks for that guy.

SloS13 · « **Reply #9 on:** February 28, 2010, 01:00:12 AM »

The motor probably was fine until you undertorqued one of the oil pan bolts when you were inspecting the bottom end, resulting in the damage in the photographs.

88dx · « **Reply #10 on:** February 28, 2010, 01:03:54 AM »

Ud have to be a fucking retarded Canadian to buy a Ford diesel

Jorsher · « **Reply #11 on:** February 28, 2010, 01:08:56 AM »

Quote from: SloS13 on February 28, 2010, 01:00:12 AM

The motor probably was fine until you undertorqued one of the oil pan bolts when you were inspecting the bottom end, resulting in the damage in the photographs.

FUCK YOUU

schim187 · « **Reply #12 on:** February 28, 2010, 01:37:31 AM »

HAHA LOL I think it overheated to the point that it cracked the cylinder wall...detonated the piston...i hate fords and everything about them, this thing was a pain in the ass but the guy who owns it said it was guaranteed to run....gonna do us some Montana justice and go get the money back or tie the block to the guys leg and go throw it in a lake

ADSR · « **Reply #13 on:** February 28, 2010, 01:51:46 AM »

Quote from: 88dx on February 28, 2010, 01:03:54 AM

Ud have to be a fucking retarded Canadian to buy a Ford diese :?:l

ford hasn't made a diesel til this year.

international sure does make a pile of shit.

highroller54 · « **Reply #14 on:** February 28, 2010, 02:16:10 AM »

I love my ford diesel

88dx · « **Reply #15 on:** February 28, 2010, 02:23:04 AM »

Quote from: 88dx on February 28, 2010, 01:03:54 AM

Ud have to be a fucking retarded Canadian to buy a Ford diesel

Quote from: highroller54 on February 28, 2010, 02:16:10 AM

I love my ford diesel

I can see why

highroller54 · « **Reply #16 on:** February 28, 2010, 02:26:33 AM »

Quote from: 88dx on February 28, 2010, 02:23:04 AM

Quote from: 88dx on February 28, 2010, 01:03:54 AM
Ud have to be a fucking retarded Canadian to buy a Ford diesel

Quote from: highroller54 on February 28, 2010, 02:16:10 AM
I love my ford diesel
I can see why

lol Jew

TTC · « **Reply #17 on:** February 28, 2010, 03:07:38 AM »

Quote from: SloS13 on February 28, 2010, 01:00:12 AM

The motor probably was fine until you undertorqued one of the oil pan bolts when you were inspecting the bottom end, resulting in the damage in the photographs.

Theluls.

stealthiskey · « **Reply #18 on:** February 28, 2010, 03:22:49 AM »

that rods still good

Doug · « **Reply #19 on:** February 28, 2010, 03:48:15 AM »

Piston looks pretty cool. Clean it up, frame it, and hang it on the wall

snm95ls · « **Reply #20 on:** February 28, 2010, 04:53:17 AM »

Quote from: Doug on February 28, 2010, 03:48:15 AM

Piston looks pretty cool. Clean it up, frame it, and hang it on the wall

What piston?

Doug · « **Reply #21 on:** February 28, 2010, 05:08:15 AM »

Quote from: snm95ls on February 28, 2010, 04:53:17 AM

Quote from: Doug on February 28, 2010, 03:48:15 AM
Piston looks pretty cool. Clean it up, frame it, and hang it on the wall

What piston?

I meant rod

Adam Lofton · « **Reply #22 on:** February 28, 2010, 11:32:50 AM »

The T-1000 was hiding in the oil pan?

Quote from: ADSR on February 28, 2010, 12:38:14 AM

Quote from: n2o_2k on February 28, 2010, 12:33:54 AM
what could they possibly have done to have it damage like this.

i'm putting my money on hydrolock

This

Teg2boo · « **Reply #23 on:** February 28, 2010, 12:05:56 PM »

That rod will be ok with minor fix ;D

schim187 · « **Reply #24 on:** February 28, 2010, 02:22:04 PM »

T-1000 huh?

Adam Lofton · « **Reply #25 on:** February 28, 2010, 03:28:03 PM »

Quote from: schim187 on February 28, 2010, 02:22:04 PM

T-1000 huh?

Jorsher · « **Reply #26 on:** February 28, 2010, 03:43:21 PM »

lol, looking at those screenshots it's amazing I used to think that movie looked uber-realistic.

Adam Lofton · « **Reply #27 on:** February 28, 2010, 04:06:50 PM »

Quote from: Jorsher on February 28, 2010, 03:43:21 PM

lol, looking at those screenshots it's amazing I used to think that movie looked uber-realistic.

It was state of the art at the time. Keep in mind that movie was made in 1990.

schim187 · « **Reply #28 on:** February 28, 2010, 10:40:57 PM »

haha lol gotcha

Jorsher · « **Reply #29 on:** February 28, 2010, 11:00:54 PM »

Quote from: Adam Lofton on February 28, 2010, 04:06:50 PM

Quote from: Jorsher on February 28, 2010, 03:43:21 PM
lol, looking at those screenshots it's amazing I used to think that movie looked uber-realistic.

It was state of the art at the time. Keep in mind that movie was made in 1990.

well aware.

Haven't watched it again since the early 90s either, so this is the first time I noticed how fakish it really is

News:

Author Topic: It rolled over and they said the motor was good... (Read 11328 times)

bigwig

Adam Lofton

Adam Lofton

Adam Lofton