:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: danz on March 28, 2010, 07:41:39 PM
-
my friend Darin and I finally made the manifold for my build (last one was for Darins drag car)
i did the welding, and we both mocked it up together trading ideas on the best way to route the runners.
once again, its paired properly. :D i guess i just like the one we did for his car better. maybe this one will grow on me. its nice, but, damn, when we made his i fell in love with it. lol :(
heres the collector. once again the O0 jig came into play. man i love that thing.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh3.ggpht.com%2F_KLU2PrSrd8E%2FS6_T0_dkwLI%2FAAAAAAAAB3A%2F53zofXYfP_g%2Fs800%2FDSC_004611.JPG&hash=bf8e44b0dbb2c47892a8e98bca7b6ad0bd4a2077)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh3.ggpht.com%2F_KLU2PrSrd8E%2FS6_Tz9CwjVI%2FAAAAAAAAB28%2FqOXSMC1HFvg%2Fs800%2FDSC_004711.JPG&hash=c5f2f4e07eaf8789402ef53d848515b8b7b70caa)
tacked the first runner
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh5.ggpht.com%2F_KLU2PrSrd8E%2FS6_TzoWbPZI%2FAAAAAAAAB24%2FNj3S9BllfuM%2Fs800%2FDSC_005811.JPG&hash=f98ea097ddcc5caa9389758d81c2fceaf0f4d933)
placement
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh5.ggpht.com%2F_KLU2PrSrd8E%2FS6_TybO8o7I%2FAAAAAAAAB2w%2F_BfRdu5RENg%2Fs800%2FDSC_006111.JPG&hash=ba142261e077bbe6c917abe0a385ee1c59501b3b)
all tacked up
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_KLU2PrSrd8E%2FS6_TxxPn2CI%2FAAAAAAAAB2s%2F3lQ6azs-GSQ%2Fs800%2FDSC_006411.JPG&hash=5b6a42c16031e309c6143bffcc121112da5ddc44)
money shot
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh4.ggpht.com%2F_KLU2PrSrd8E%2FS6_TxcA3cxI%2FAAAAAAAAB2o%2F2S_zdGOGz6c%2Fs800%2FDSC_007311.JPG&hash=962308e241ea32f872960e3513210148fb6573d2)
here you can also see the sweetest chinese welder ever made.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh5.ggpht.com%2F_KLU2PrSrd8E%2FS6_pCFttbrI%2FAAAAAAAAB4A%2FXm_UktkPkwI%2Fs800%2FDSC_006511.JPG&hash=304b1858d9068074364cf5ac967204ae17c002b1)
notice the gangster driver side mount.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh4.ggpht.com%2F_KLU2PrSrd8E%2FS6_TwxAVb9I%2FAAAAAAAAB2k%2FSGtMVub0T4Q%2Fs800%2FDSC_007611.JPG&hash=121155b1383c3ca17563b18682d1abb52ffe24bb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh5.ggpht.com%2F_KLU2PrSrd8E%2FS6_TwKp1CGI%2FAAAAAAAAB2g%2FQNq_E4c-XAc%2Fs800%2FDSC_007711.JPG&hash=9723c40123692773bb65b623cdd1c436b7e2669f)
all welded up. i had to remove runner # 3 and weld it separate.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_KLU2PrSrd8E%2FS6_TvrDMOII%2FAAAAAAAAB2c%2FgRY51JOYYv4%2Fs800%2FDSC_0083.JPG&hash=9dff6af0e8884629e5f0c260f4416eef84072d1d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_KLU2PrSrd8E%2FS6_XQdl5AhI%2FAAAAAAAAB3k%2FNfytBfdI14o%2Fs800%2FDSC_0096.JPG&hash=0e682ee68e7acb36f4b3c2baf2e80b3e98df4db3)
-
I like it. How do you plan to run the intercooler?
-
charge piping will go behind the rad between the block and rad fan, and through the IC, into the tb. should be very small amount of charge piping.
water to air.
-
i like
-
Thats cool. Why the angle? Easier to run the DP out the fender?
-
Thats cool. Why the angle? Easier to run the DP out the fender?
it just seemed like the thing to do at the time. left me the most room to do other things i want to do. mostly easier to run less charge piping this way
-
Looks pretty badass. Good job Dan
-
Very nice job. I hope to be doing work like your in a few months when Ive got a better handle on welding ( currently practicing!)
-
looks good so far, in for more pics!
-
looks good so far, in for more pics!
ill have some of the waste gate placement and so forth shortly.
i need a fuckin belt sander to true up some flanges. lol.
or better yet my own mill!
-
Its O0
I like
-
Looks tits. MIG'd I'd assume?
If I had that I'd put the WG straight down, so it's at a 45* with the collector. I just like no possibility of boost creep, although it's meaningless when you crank the boost controller to NOG setting.
3rd gear untuned ripper vids ASAP :yes:
-
Looks tits. MIG'd I'd assume?
If I had that I'd put the WG straight down, so it's at a 45* with the collector. I just like no possibility of boost creep, although it's meaningless when you crank the boost controller to NOG setting.
3rd gear untuned ripper vids ASAP :yes:
feck yeah its migged.
finished it up last night.
heres the pics.
anti creep. 1 3/4 hole saw.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_KLU2PrSrd8E%2FS9Kf_aaW2XI%2FAAAAAAAAB-E%2FDklIEWIrWjA%2Fs800%2FIMG_2450.JPG&hash=9035bd0da97b40c4c7f1b85dce6fcb29dbfa2a49)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh4.ggpht.com%2F_KLU2PrSrd8E%2FS9Kf_62WD8I%2FAAAAAAAAB9w%2FjgXmQx6-vjQ%2Fs800%2FIMG_2458.JPG&hash=801d94a49d1c0d3a052528b9dc37072d79950afe)
big migga deluxe
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_KLU2PrSrd8E%2FS9KgAVY-bNI%2FAAAAAAAAB90%2FqGH886k6Dlg%2Fs800%2FIMG_2460.JPG&hash=33a661456cb9a0007ad0f89d13ecdb118afedef2)
and the dump tube with my balla stainless extension
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_KLU2PrSrd8E%2FS9KgBdGCBiI%2FAAAAAAAAB94%2Fm0rHxUO-cMQ%2Fs800%2FIMG_2477.JPG&hash=9239d44adb278e306206edfabd47f9d670e2ba36)
-
almost forgot to post this too
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh5.ggpht.com%2F_KLU2PrSrd8E%2FS846sobwoZI%2FAAAAAAAAB7c%2Fw_Hvbuc0R4c%2Fs800%2FDSC_0128.JPG&hash=1bfc12a71a617ab17807b312a718626b5c77944f)
-
great clean fab work.
-
Bad ass man. Love the placement. Lookin tits
-
to help illustrate this a little better i took a pic with the charge piping mocked up.
let me tell ya, this charge piping was a CUNT to do without couplers to hold everything in place. ended up using tape. haha
im thinking about getting my friend to replicate the hot side with aluminum. not really liking the idea of the mild steel heat soaking. but if i cant afford that ill just wrap it with some home depot thermal sheet.
i also welded on the BOV flange, right at the bend that goes into the intercooler on the outside radius.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh3.ggpht.com%2F_KLU2PrSrd8E%2FS9SVChlMQxI%2FAAAAAAAAB-w%2FCo8wOnZHhds%2Fs800%2FApril%252025%252C%25202010%2520052.jpg&hash=69fdb5b2a6afc5fd46f99d87af5430c8cafc6026)
-
another good pic showing turbo placement.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_KLU2PrSrd8E%2FS9SVFN5JdcI%2FAAAAAAAAB_A%2FHiRhku88clI%2Fs800%2FApril%252025%252C%25202010%2520031.jpg&hash=dcb7f69814781217a4bd0a91be1b3f40b8829505)
-
little update. put the manifold to use and its working really well! see my other thread in FI
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_KLU2PrSrd8E%2FTGAzysB3koI%2FAAAAAAAACIc%2FqovPqYZAETk%2Fs800%2Fdanzdyno%2520skewed.jpg&hash=7ac3c295db0a2789c6a6cff21998ede7d2e83bdc)
-
i love the migturd! intresting desine to
-
put in some work and changed the setup a little bit
(https://lh3.googleusercontent.com/-O_l6jPFZwCI/TaxhBek1vwI/AAAAAAAACuQ/HWhd0ACv7hk/s800/DSC_4319.jpg)
(https://lh5.googleusercontent.com/-zgG9NLx061U/Tkvf6tRHG3I/AAAAAAAADSM/5tFGKFRzkek/s800/dan3-2.jpg)
(https://lh5.googleusercontent.com/-qWByrBUJTQw/TnT6QN5k0aI/AAAAAAAADVI/6dpMjcyqxp4/s512/09172011379.JPG)
(https://lh5.googleusercontent.com/-ONrwiepM1I4/TotA7Dmp8UI/AAAAAAAADeg/LptG528k5p4/s720/danz2-3.jpg)
(https://picasaweb.google.com/lh/photo/9cI9WiImSz1NuxwNww3S8oAH5YWXaPWFz-4nRnRmDEM?feat=directlink)
(https://lh4.googleusercontent.com/-zasewJPJJQU/TqtOm3IVQKI/AAAAAAAADbA/5ecAqPQ9Dn0/s800/Oct%25252028%25252C%2525202011%252520004.jpg)
-
fuck ya bitch O0
-
I bet that fucker pulls like no there on the top end!
-
I think I need to go kick those guys with the intake mani in the nuts for you!
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fmedia.tumblr.com%2Ftumblr_lkfmzwzfCY1qagpor.jpg&hash=f4b7cd62c118901fce36951c642fbbb01c0ae75a)
-
(https://lh5.googleusercontent.com/-qWByrBUJTQw/TnT6QN5k0aI/AAAAAAAADVI/6dpMjcyqxp4/s512/09172011379.JPG)
All that work for a 13.3?? My grandma could cut better times with slicks! :mexi:
Not bad for a mig'd mild steel manifold! Is that intercooler a name-brand or ching chong? Seems a bit small for 500whp.
-
(https://lh5.googleusercontent.com/-qWByrBUJTQw/TnT6QN5k0aI/AAAAAAAADVI/6dpMjcyqxp4/s512/09172011379.JPG)
All that work for a 13.3?? My grandma could cut better times with slicks! :mexi:
Not bad for a mig'd mild steel manifold! Is that intercooler a name-brand or ching chong? Seems a bit small for 500whp.
His car is 7528 from previous pics.
10.5 not 13
-
(https://lh5.googleusercontent.com/-qWByrBUJTQw/TnT6QN5k0aI/AAAAAAAADVI/6dpMjcyqxp4/s512/09172011379.JPG)
All that work for a 13.3?? My grandma could cut better times with slicks! :mexi:
Not bad for a mig'd mild steel manifold! Is that intercooler a name-brand or ching chong? Seems a bit small for 500whp.
His car is 7528 from previous pics.
10.5 not 13
Sarcasm it is lost on the french...
-
Sarcasm it is lost on the french...
-
(https://lh5.googleusercontent.com/-qWByrBUJTQw/TnT6QN5k0aI/AAAAAAAADVI/6dpMjcyqxp4/s512/09172011379.JPG)
All that work for a 13.3?? My grandma could cut better times with slicks! :mexi:
Not bad for a mig'd mild steel manifold! Is that intercooler a name-brand or ching chong? Seems a bit small for 500whp.
His car is 7528 from previous pics.
10.5 not 13
Sarcasm it is lost on the french...
-
I wasn't being sarcastic :mexi:
-
(https://lh3.googleusercontent.com/-O_l6jPFZwCI/TaxhBek1vwI/AAAAAAAACuQ/HWhd0ACv7hk/s800/DSC_4319.jpg)
How is the oil drain working?
-
(https://lh5.googleusercontent.com/-qWByrBUJTQw/TnT6QN5k0aI/AAAAAAAADVI/6dpMjcyqxp4/s512/09172011379.JPG)
All that work for a 13.3?? My grandma could cut better times with slicks! :mexi:
Not bad for a mig'd mild steel manifold! Is that intercooler a name-brand or ching chong? Seems a bit small for 500whp.
His car is 7528 from previous pics.
10.5 not 13
Sarcasm it is lost on the french...
I wasn't being sarcastic ENGLISH NIGGERS! :mexi:
In your face bitches!
-
Listen here Frenchie, we are decidedly not English here in Merica. We are Uh-Mericans.
Yes, we claim all of the Ameriecas.
:P
-
Listen here Frenchie, we are decidedly not English here in Merica. We are Uh-Mericans.
Yes, we claim all of the Ameriecas.
:P
You mean Uh-Mexicans. I think white people is minority in US no? :mexi:
-
Listen here Frenchie, we are decidedly not English here in Merica. We are Uh-Mericans.
Yes, we claim all of the Ameriecas.
:P
You mean Uh-Mexicans. I think white people is minority in US no? :mexi:
Lol. You seriously have a skewed prospective. I am pretty sure that crackers are still the majority so far.
:P
-
Manifold is tits...
-
(https://lh3.googleusercontent.com/-O_l6jPFZwCI/TaxhBek1vwI/AAAAAAAACuQ/HWhd0ACv7hk/s800/DSC_4319.jpg)
How is the oil drain working?
works good, no issues. i made a short turn 5/8ths drain out of 5/8ths pie cuts. check this shit out. rhmt for life on this...
:mexi:
(https://lh4.googleusercontent.com/-W86Swv6xLo0/Tbi0LORj-bI/AAAAAAAACv4/SIVcACxh5XQ/s640/April%252027%252C%25202011%2520041.jpg)
-
Baller whitey bend. You even "bead rolled" it with weld blobs.
-
Dan are you going to run again this year at Mission? And how many E-cigs did you smoke making that manifold :P
-
Baller whitey bend. You even "bead rolled" it with weld blobs.
hahah yeah. i like that damn bend.
i think it even got a coat of JB weld after that...
Dan are you going to run again this year at Mission? And how many E-cigs did you smoke making that manifold :P
fuck yeah man. and about the e-cigs... fuck eh, who knows. a whole lot of eciggin goes down.