:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: bigdaddyvtec on October 28, 2009, 01:14:00 AM
-
So as I bought this Rodeo and got it for the wintertime and have finished making sure everything is all good for the winter (Everything from WIndshield wipers to anti freeze, tune up and oil change... and stereo).... Figured since it dumped over a foot at Stevens pass Id take 2 of my trick sluts up to the pass and do some doriftoing... Therfe was about 14" down.... Here are a few vids and pics and shit
Wasnt sure how deep it was... shoulda got a bit of a run at it first run though wanted to make sure the 4WD and everything was good and Im NOT trying to break this fucking thing...
http://www.facebook.com/video/?id=639350377#/video/video.php?v=168042630377 (http://www.facebook.com/video/?id=639350377#/video/video.php?v=168042630377)
Sno Doriftoing:
http://www.facebook.com/video/?id=639350377#/video/video.php?v=168040540377 (http://www.facebook.com/video/?id=639350377#/video/video.php?v=168040540377)
I tried to get her in the act but the bitch is smart and took my fucking phone before whe went... O0
http://www.facebook.com/video/?id=639350377#/video/video.php?v=168041480377 (http://www.facebook.com/video/?id=639350377#/video/video.php?v=168041480377)
Random
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FBrookie%2520poo%2FPIC-0210.jpg&hash=26d10cf252bb90fc965da9395d7d75ae888673e4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FBrookie%2520poo%2FPIC-0207.jpg&hash=ab034769c9534f34c8e2ba5f0eaf266520798115)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FBrookie%2520poo%2FPIC-0211.jpg&hash=9922b4a06e13735c68f6154741ddb4753052920b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FBrookie%2520poo%2FPIC-0208.jpg&hash=394a94036183dd026e3efd8a8165ea733894bfad)
Bottom line is that this fucking thing is totally fucking awesome in the snow. LSD FTMFW in the rear and I was stopping and going as I pleased in well over a foot of fresh powder.
Good times... I would have liked to provide fottage with all 4 in the air but im not trying to have two piles of shit broken all of the time. This truck is solid as last nights erection stroking to tranny porn, and the brookjob that came after...
:noel:
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FBrookie%2520poo%2FPIC-0207.jpg&hash=ab034769c9534f34c8e2ba5f0eaf266520798115)
you must have a great personality to keep her around, because you an ugly mofo.
btw im an unapologetic asshole.
-
Shit son... I PUT IT DOWN. O0
Fucking truck is a kick in the ass...
-
good score on the truck.
-
Yellow sno cone????
Congratulations, I need to find me a decently attractive female that actually likes my ugly ass, and doesn't mind my childish pleasures like you there. Seriously, she got a sister? Or are you trying for the family hat trick (if you are, you're my hero)?
-
Yellow sno cone????
Congratulations, I need to find me a decently attractive female that actually likes my ugly ass, and doesn't mind my childish pleasures like you there. Seriously, she got a sister? Or are you trying for the family hat trick (if you are, you're my hero)?
I met my girlfriend one night you see.
and we were drinking pleasntly
then all of the sudden she wanted to shotgun some beer. So I said sure (i am not much of a drinker at the time) and she then proceeds to bring 3 beers from the cooler and I think fuck I cant do 2 beer I am a pussy.......... But she asks me if i am ready to drink and I say sure why not.
She then grabs the beer with her right hand, slams the bottom of the thing into her fang like upper teeth, put the beer upside down drinks the whole thing in what seemed like a second and then she had it on the ground and empty before I could puncture mine. She then waits for me to open mine before she drinks the other one in what seemed like less time than the first.
true story
-
Sounds like a hell of a family reunion, Levi.
-
calmini.com
-
you have to have facebook to watch those, which i dont have. but i got the idea with the pictures.
-
Sounds like a hell of a family reunion, Levi.
LOL
-
"i hope we don't get stuck... what are we gonna do, make out and fuck?"
hahahaha
that thing does look beast in the snow though.
-
calmini.com
Already been looking :noel: Seems like the best option for Rodeo (Isuzu in general actually) off road upgrades
IT Could use a upgraded stabilizer...stock one is still on the car... and I thought about a 2" lift and some 33s (It has a DANA 44 with a TruTrac in the rearend stock) BUT...
It handles/rides very well how it is and has plenty of ground clearance31x 10.5x15s... It will not see trails or the rubicon, but Im a sucker for snow.... I dont want to fuck with the suspension or a body lift and the power is really nice (Im not trying to gear it and shit).
In thinking about the helperspring kit for the rear (classic suv rear end sag) and as set of shocks. The tires have like 90 percent tread on them stiull. It was alot of fun yesterday
-
looks like you had a blast... guess you didn't get stuck then hey...
-
looks a little like mary
-
Just got a pair of 12s for doing a valvejob on this guys accord..... 45 minutes :evil: theyre brand new.....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FPIC-0215.jpg&hash=5440ec5624ac6f68f0b45010c778191174890c8c)
Run into 2 OHms bridged using an oldschool DSM type fosgate 220.1 that is probably putting out around 400 honest watts to them... Fuck they pound......
So now I have my old lil 10 inch JL for sale(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FPIC-0213.jpg&hash=d4de40d02fca903d3dde0b27d449d004bc7851ac)
O0
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fphotos-c.ak.fbcdn.net%2Fphotos-ak-snc1%2Fv2653%2F24%2F103%2F657744670%2Fn657744670_1501157_5912700.jpg&hash=e55fc2a1022a7e7e16a0436c6d0a95dce82f746e)
-
Family portrait nigger???
Thought that this was yours....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2Fhome%2FOWNED1.jpg&hash=536958e71ff2ae0235fc5ba01a06b8ba5f74a690)
-
!0 inch JL is a 10W3V2D4 (Dual 4ohm VCs)... Mint as fuck
-
how much large nog? Need to downsize my 12. It's to big and ubnoxious.
-
tight ship nog :mexi:
-
looks a little like mary
Lol she does even more in person. I kept thinking that.
-
Spiker let me know when you want me to drive down and show you up in the snow with the subaru :yes:
-
a 220.1 does not put out anywhere close to 400 watts. just throwing that out there
-
Back in college I had a 88 GL10 TURBO sedan... JUST like this one without the gay MB caps... LOL Thing was insane in the snow.. Adjustable ride heigth and all that...
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.corkysrocks.net%2Fimages%2F86%2520Turbo3.jpg&hash=d871e6f9cdccec6c62f3f83153a7131c79cdcc27)
Highway 20 going to Tahoe from Chico I made two people sware theyd never EVER get in a car with me again...
THEY ARE BAD ASS... But this thing is way more roomy has more power and ground clearance... Beats the shit out of the Ranger...
a 220.1 does not put out anywhere close to 400 watts. just throwing that out there
Into 1-2 ohms it will ... Thought Id throw that out there its fact
-
calmini.com
Already been looking :noel: Seems like the best option for Rodeo (Isuzu in general actually) off road upgrades
IT Could use a upgraded stabilizer...stock one is still on the car... and I thought about a 2" lift and some 33s (It has a DANA 44 with a TruTrac in the rearend stock) BUT...
It handles/rides very well how it is and has plenty of ground clearance31x 10.5x15s... It will not see trails or the rubicon, but Im a sucker for snow.... I dont want to fuck with the suspension or a body lift and the power is really nice (Im not trying to gear it and shit).
In thinking about the helperspring kit for the rear (classic suv rear end sag) and as set of shocks. The tires have like 90 percent tread on them stiull. It was alot of fun yesterday
start with new bushings and shocks. did that to my trooper, and it made a night and day difference. for the sway bar bushings, you will have to go to auto zone and get the ones they stock on the shelf.
-
just picked up a 99 rodeo for the winter also. good to see their fun in the snow. do those ones have the annoying valve tick also?
-
yes... But I did a bunch of reading about it. I changed to Mobile 1 0-30 and a good filter as per multiple readings on various forums suggested... IT HELPED A GOOD DEAL... Its barely noticeable. Ive talked to Mitch about it too as hed worked on shitloads of them and he said that the shop he woirked at stocked that shit just for that reason.... They have hyd "lifters" and can be adjusted, butr they still have a very mild chatter no matter what...
Miners barely noticeable now.... You got the 3.2 V 6 Im assuming????
And yes SHITLOADS of fun in the snow :yes:
-
that thing looks exactly like a isuzu rodeo i sold to a friend for 2gs out the door!!!!! and people dont trust used car salesman
-
calmini.com
Already been looking :noel: Seems like the best option for Rodeo (Isuzu in general actually) off road upgrades
IT Could use a upgraded stabilizer...stock one is still on the car... and I thought about a 2" lift and some 33s (It has a DANA 44 with a TruTrac in the rearend stock) BUT...
It handles/rides very well how it is and has plenty of ground clearance31x 10.5x15s... It will not see trails or the rubicon, but Im a sucker for snow.... I dont want to fuck with the suspension or a body lift and the power is really nice (Im not trying to gear it and shit).
In thinking about the helperspring kit for the rear (classic suv rear end sag) and as set of shocks. The tires have like 90 percent tread on them stiull. It was alot of fun yesterday
start with new bushings and shocks. did that to my trooper, and it made a night and day difference. for the sway bar bushings, you will have to go to auto zone and get the ones they stock the shelf.
+1. I did all that to my trooper, made a nice difference. And we put new OME shocks on my dad's 99' trooper and it rides better too, though we got the heavy duty shocks so it's not a cadilac ride.
-
that thing looks exactly like a isuzu rodeo i sold to a friend for 2gs out the door!!!!! and people dont trust used car salesman
Youre fat!!! :mexi:
-
yeah mine is pretty loud but was reading on the other forums about the oil and filter change. i took it to a shop to have them check it out and see what they will charge to fix it. they said it wont hurt anythign to drive it liek that as long as i dont mind the noise but might have them fix it anyways. yeah its the 3.2 v6.
-
ya mine sounded like 1 or two lifters were sticking... But the oil change really did quiet it down... alot... No really tingy sounding ones anymore... Just a mild chatter of valvetrain,,, LOL.... It seems to be inhearant to the motor itself... They go wellll over 200 K thiough without issue regularly... Im going to wait till halfway through the winter before fucking with them... It quieted down alot to where its really not noticable anymore, or at least it doesnt sound BAD..... it did befoire and I was told that its the norm for that motor.
LOL
Mines got really peppy engine response for having the 31x10.50s on it... SOOO much more power than the ranger.
In 4 low its awesome!!!!
-
that thing looks exactly like a isuzu rodeo i sold to a friend for 2gs out the door!!!!! and people dont trust used car salesman
-
fuck i cant wait till it snows now lol. been kinda debating the front bull bar since these beaners over here cant drive worth a shit. i think i read somewhere that GM or dodge ones bolt right up, cant remember exactly which ones it was though.
-
that thing looks exactly like a isuzu rodeo i sold to a friend for 2gs out the door!!!!! and people dont trust used car salesman
Do you need a hug???
Ya the timing sure worked out on that huh??? :yes:
I went into Justins work mentioned i really wanted a 4wd for the winter... he showed me this one they had and were putting a new clutch and tob as well as all other tranny/ clutch related shit... I put the ranger up for sale that night. His boss held it for me....
It doesnt have 1 dent in it... Runs great is clean inside... Just a couple things I had to fix. EVERYTHING works (minus the rear drivers side window-but i have the new motor and regulator in the gartage)... Im really happy with it Gets about 20 per gallon.
-
yeah mine is pretty loud but was reading on the other forums about the oil and filter change. i took it to a shop to have them check it out and see what they will charge to fix it. they said it wont hurt anythign to drive it liek that as long as i dont mind the noise but might have them fix it anyways. yeah its the 3.2 v6.
books at 1.75 hours if i remember correctly from what DRQPQUT said
-
doesnt sound too bad, ive heard its about $600 for it to be done from other people. i figure i spent 1700 on it and it has 114k on it and nice interior, even spending the 600 i would still consider it a decent price
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi40.photobucket.com%2Falbums%2Fe218%2F1320feet%2Fairfreshner.jpg&hash=21fe32a7efba7bce0a710b472102216d13e376c3)
-
kind of off topic but i guess my buddy eric is buyin some parts off you spiker on saturday... anything to do around there. taken his super clean dx crx down...
-
fuck i cant wait till it snows now lol. been kinda debating the front bull bar since these beaners over here cant drive worth a shit. i think i read somewhere that GM or dodge ones bolt right up, cant remember exactly which ones it was though.
you got me lookin now.
-
kind of off topic but i guess my buddy eric is buyin some parts off you spiker on saturday...
Spiker's junk is always for sale.
-
hahahahahaha
being as I had right around 300 in the Ranger and sold it for 2200... And I bought this thing for 2k Licenced smogged etc out the door with BRAND NEW (3 miles when I picked it up) Clutch and almost new tires, and have dumped
5 QTS mobile 1 22
Oil filter 8
Fuel Filter 13
NGK spark plugs 12
Air filter 15
New windshield wipers (All 3) 22
Wiring for Amp (Kit deal) 20
Set of Mid grade tweeters 25 (on the dealz)
Free CD player
Free Eclipse 5 1/4 coax for the back
Woofers I got for doing valve adjustment
New window motor for rear drivers door (wndow doesnt work yet) and sun visors from Pick your part (Freebies)...
Im SUPPPPPER happy. :yes:
-
HMT Cold air intake will be in progress tomorrow... Aluminum using the M&N filter I used to have on the accord that wont fit anymore (and has been replaced with one that will)....
Supposedly they pick up about 10 HP or so from the C almini one... Well see... PIcs to come. Wont be turboing this thing though...
-
wheeling is fun
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.realhomemadeturbo.com%2Fjohnny%2F94GMC%2F94GMC_11.jpg&hash=8a6b4c3e976f015795ac8c7c99f9e67e456a9f8f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.realhomemadeturbo.com%2Fjohnny%2F94GMC%2F94GMC_12.jpg&hash=53438d9ef29ba5cb4608a58579531113c0ccaa58)
-
Johnny your pics is blurry as fuck, but is that S-10 SAS'd?
-
Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT
Complex...
The Mesas and the Liberators that are on it work grrrrrrrrrreat... WOnt be needing tires anytime soon :O) I had a set of 35 " BFG ATs after my 35 MT Bajas on my 81 blazer and they do work great. Better than the MTs EVER didin either the mud or snow...
-
fuck i cant wait till it snows now lol. been kinda debating the front bull bar since these beaners over here cant drive worth a shit. i think i read somewhere that GM or dodge ones bolt right up, cant remember exactly which ones it was though.
My dads Camry is on its lasts legs. This will probably be its last winter, if you get what I'm saying. :evil: :yes:
-
fuck i cant wait till it snows now lol. been kinda debating the front bull bar since these beaners over here cant drive worth a shit. i think i read somewhere that GM or dodge ones bolt right up, cant remember exactly which ones it was though.
My dads Camry is on its lasts legs. This will probably be its last winter, if you get what I'm saying. :evil: :yes:
lmfao, sounds like ill be following you out to the LT? because were leaving that bitch out there hahaha, only thing is people are going to be looking at you kinda funny rolling over the cattle gaurd with a helmet on ;)
-
Johnny your pics is blurry as fuck, but is that S-10 SAS'd?
yes.
its 72 blazer 3/4 frame with a 94 sonoma body
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.realhomemadeturbo.com%2Fjohnny%2F94GMC%2F94GMC_10.jpg&hash=1f27439c42379408f90b89f2191284d33783b934)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.realhomemadeturbo.com%2Fjohnny%2F94GMC%2F94GMC_14.jpg&hash=726a879ed9ee067c1f29f741b7a510410935a362)
-
Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT
very tightly.
but comfy in the dodge
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.realhomemadeturbo.com%2Fjohnny%2FRAM%2Fram_2.jpg&hash=182b0b6ed2490eb7fffc21dc6e7d0a47c521e312)
-
crackberries take bad photographs
-
wish they would take fucking video lol, well at least mine doesnt.
-
mine does, it sucks too
-
Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT
Complex...
The Mesas and the Liberators that are on it work grrrrrrrrrreat... WOnt be needing tires anytime soon :O) I had a set of 35 " BFG ATs after my 35 MT Bajas on my 81 blazer and they do work great. Better than the MTs EVER didin either the mud or snow...
but they fail on we roads pretty hardcore
O
I read the reviews on them too, but im telling you they do not. At least not on this thing. I have mesas on the rear and the liberators on the front. 80MPH in a hard ass downpour with lots of water on the ground... Maybe on a pickup or Jeep they suck, but theyre just duxcky on this thing and worked pretrty damn well in the 14" of snow the other day. I KNOW there are better tires, and Ill have a set, but not till these are done,
The more I drive this thing the more I like it.
-
Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT
very tightly.
but comfy in the dodge
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.realhomemadeturbo.com%2Fjohnny%2FRAM%2Fram_2.jpg&hash=182b0b6ed2490eb7fffc21dc6e7d0a47c521e312)
That sucks. IFS and a solid 12 mpg. should have got a diesel.
-
The more I drive this thing the more I like it.
Coming from an Accord, I'm not surprised.
-
Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT
very tightly.
but comfy in the dodge
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.realhomemadeturbo.com%2Fjohnny%2FRAM%2Fram_2.jpg&hash=182b0b6ed2490eb7fffc21dc6e7d0a47c521e312)
That sucks. IFS and a solid 12 mpg. should have got a diesel.
Ifs is fine for with what I want it for
It gets 12.6 in town and about 16 on the highway the hemi motor is badass I'd rather have a diesel but they are sooooo expensive.
-
a friend of mine has a truck just like that and is pretty happy with it too
-
they are fast for a truck. hemi motor is badass... new one makes even more power
mine is 345/390 i think the new ones are 390/390
-
This thread isnt about Dodge (TRUCK) fail... Its about ISUZU W1N!!!!!11!1!!111!1!! one. :yes:
Take the Ramfail elsewhere you tubby puppyfucker... HAHAHAHA
BTW... Where are complexes posts going???
-
back to the point then
here is my new winter ride
99 rodeo ls 4wd 3.2 auto
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi826.photobucket.com%2Falbums%2Fzz189%2Fjeffsciv23%2FIMG00035.jpg&hash=d4831db6e73968c7909bb9e0585c45fbbcb192e0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi826.photobucket.com%2Falbums%2Fzz189%2Fjeffsciv23%2FIMG00036.jpg&hash=0a8d90cfbab08a0d6a354b208870f7648f15b04a)
im kinda diggin this bull bar for it with or without the lights
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi826.photobucket.com%2Falbums%2Fzz189%2Fjeffsciv23%2FSafariBarIZSL103WPR.jpg&hash=341dc02f9d8d9d1feb90851da35c48a2a0c60cf6)
fixed
-
Id like to see the bar... I wouldnt mind a bumper for mine...
-
think it could use a lift for sure but im not feeling the 1000 that most are lol
-
It needs the turbo off the accord to reach it's for potential
-
BTW... Where are complexes posts going???
For once it wasn't me. He pissed a few mods.... correction, he re-pissed a few mods over thread crapping in the FS section. I imagine it's open season on his posts again. Why they don't just give him a week off like anyone else, IDK, he's actually somewhat decent for a week or so after a ban.
-
think it could use a lift for sure but im not feeling the 1000 that most are lol
I have a trooper and have never needed a lift. Of course I dont do anything hardcore, but its been through the woods a number of time, buried to the doors in mud/snow and the skid plates have been hit a few times, but it continues to chug along without the lift.
My trooper and I have a serious love and hate relationship. Id love to sell it, but know I would miss it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.static.flickr.com%2F3629%2F3309741311_4a9ba4e7ed_b.jpg&hash=b5886ec2576763b7f1cab277bb1122eb1cbcd111)
-
yeah im not planning on doing anything with it besides snow and maybe going up to the woods to go shooting
-
hemi sucks 3x the power of Isuzu garbage
-
the skid plates have been hit a few times, but it continues to chug along without the lift.
My trooper and I have a serious love and hate relationship. Id love to sell it, but know I would miss it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.static.flickr.com%2F3629%2F3309741311_4a9ba4e7ed_b.jpg&hash=b5886ec2576763b7f1cab277bb1122eb1cbcd111)
Thatsa the ONLY thing thats shitty... When fat asses chroinies did the treanny they didnt put the skid plates back on :-\ He whined about how he had to spend a bunch of time getting them off.... I know they have quite a few... Onlyt one Id really like to get back on it is for the TC..... But the dipshit threw them away...
Illl at some point probably go pull a set off of oone in a junkyard... But not in the middle of winter in WA.. I doubt ill ever touch anything nyways. Definately not the driveshafts... But the TC one WOULD be nice for ptiece of mind.
Think I may shorten up the bump stops an inch and a halfr so in the rear. Good to know that the Toy/Chev bolt patterns are the same too
-
I was thinking about making a CAI for it and deleting gther airbox.... Not sure now if im going to... It is winter up here... Wonder how it would respond to a 2.5" exhaust and like a flowmaster or some shit :mexi:
-
I was thinking about making a CAI for it and deleting gther airbox.... Not sure now if im going to... It is winter up here... Wonder how it would respond to a 2.5" exhaust and like a flowmaster or some shit :mexi:
leave the air box if you want to wheel, cai will suck up water and/or mud
-
Putting exhaust on it would make it a loud and annoying. those motors do not sound good with exhaust.
-
stock it stays then
-
You can still upgrade the manifold to the cat region
-
Putting exhaust on it would make it a loud and annoying. those motors do not sound good with exhaust.
i was told quite the opposite when i ran a chambered glasspack by pretty much everyone that i came across ???
You live in a town with two stoplights, and no jobs. Everyone you come across is related to you and doesn't want to hurt your feelings - if they know better.
-
Putting exhaust on it would make it a loud and annoying. those motors do not sound good with exhaust.
i was told quite the opposite when i ran a chambered glasspack by pretty much everyone that i came across ???
You live in a town with two stoplights, and no jobs. Everyone you come across is related to you and doesn't want to hurt your feelings - if they know better.
census of the city income is 44k a year with 3 trailer parks in it too, there is jobs
there isn't jobs at the bottom of the rum bottle, and you spend enough time there to share stories about how that goes
Can you get one that's higher up the payscale than car washer or pizza delivery boy? Something that would get you closer to half that $44K figure? Because all you post up pictures of are the cheapest available canned domestic beers and cheap starches mixed with potted meat for under $2.50 a plate, so don't act like you're any better than I am especially when I don't live at home with my parent's footing the bill.
Oh, yeah, I was born with a functional brain. Kiss my ass.
-
I was thinking about making a CAI for it and deleting gther airbox.... Not sure now if im going to... It is winter up here... Wonder how it would respond to a 2.5" exhaust and like a flowmaster or some shit :mexi:
I picked up a few mpg by getting rid of the stupid air silencer box thingy. The only thing I have is the box that holds the filter and the pipe to the tb. I want to do a 2.5" ex and a better flowing exhaust...just never done it. :-\
http://www.expeditionportal.com/forum/forumdisplay.php?f=25 (http://www.expeditionportal.com/forum/forumdisplay.php?f=25)
lots of people in there with isuzus that do some building with them
-
Putting exhaust on it would make it a loud and annoying. those motors do not sound good with exhaust.
i was told quite the opposite when i ran a chambered glasspack by pretty much everyone that i came across ???
You live in a town with two stoplights, and no jobs. Everyone you come across is related to you and doesn't want to hurt your feelings - if they know better.
census of the city income is 44k a year with 3 trailer parks in it too, there is jobs
there isn't jobs at the bottom of the rum bottle, and you spend enough time there to share stories about how that goes
Can you get one that's higher up the payscale than car washer or pizza delivery boy? Something that would get you closer to half that $44K figure? Because all you post up pictures of are the cheapest available canned domestic beers and cheap starches mixed with potted meat for under $2.50 a plate, so don't act like you're any better than I am especially when I don't live at home with my parent's footing the bill.
Oh, yeah, I was born with a functional brain. Kiss my ass.
beat me to it.
also, this:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi40.photobucket.com%2Falbums%2Fe218%2F1320feet%2Fyes.jpg&hash=eabb5edc8b5eaac0f681a9b8a625fc4dd5953173)
-
Last night I was going to wait for Jon to buck up to me over that, but after sleeping on it he's not worth the fairmindedness. I'm a big fan of burning bridges.
10:34 PM me: If Banhammer Wednesday came about, who is the most deserving?
10:35 PM boostedschemes: i dont know I dont really look on hmt anymore outside of searches
complex would be nice any time though
10:36 PM me: why complex?
boostedschemes: are you kidding me
10:37 PM me: I want to hear your thoughts
10:38 PM boostedschemes: my thoughts are not about jon
me: about why to ban him
10:39 PM give me the two sentence condensed version
10:41 PM boostedschemes: He is an unemployed PA townie who lives with his parents, alive only due to leftovers from making potato guns with his moms hairspray and licking the drops out of the empties his dad tosses at him. His posts rarely make any sense and generally invlove gluing a shoe to sheet metal and somehow powering it with moonshine to remove spark plugs when the obvious method is to use a wrench.
He is also nearly your age and he's banging overweight girls your daughters age when he isnt coddling himself to sleep
10:42 PM me: lol
-
What is Yuriy's claim to fame?
He's angry.
-
The stock ex is 1,75-2 inch with some pretty shitty bends in it... It has a new cat but it (the system) appears pretty restrictive. I was thinking 2.25 with a chambered muffler... Its basically what calmini sells, but for like 450 bux. Id just take it from where the two manifolds merge and leave the new cat out and weld it back in when I need to do emmssions... Or just make a bolt in test pipe kind of thing....
Ive been reading and evidently it does really help them out. Just not sure what muffler to use to keep it from sounding gay... Then agaion I dont really give a fuck what it sounds like as long as its not raspy. I dont expect it to sound like a BBC with 3"x2 and flowbees
-
Honda Passport with Flowmaster 40 series muffler planetisuzoo (http://www.youtube.com/watch?v=uvy6pOaURSU#normal)
-
The stock ex is 1,75-2 inch with some pretty shitty bends in it... It has a new cat but it (the system) appears pretty restrictive. I was thinking 2.25 with a chambered muffler... Its basically what calmini sells, but for like 450 bux. Id just take it from where the two manifolds merge and leave the new cat out and weld it back in when I need to do emmssions... Or just make a bolt in test pipe kind of thing....
Ive been reading and evidently it does really help them out. Just not sure what muffler to use to keep it from sounding gay... Then agaion I dont really give a fuck what it sounds like as long as its not raspy. I dont expect it to sound like a BBC with 3"x2 and flowbees
Just keep in mind that you will probably have to have 2-3 mufflers in it to keep it close to silent. I'd go 2.5 with 2 bombs and a good muffler or 2 good mufflers. Maybe talk to a good known exhaust shop and see what they have to say about keeping it quiet. Unbolt the exhaust if you want to get an idea of how shitty they sound with exhausts on them. Its horrible. So as long as you could keep it on the silent side it would be fine. The exhausts on those things are as close to horrible as it gets. You can hear the exhaust coming out at supersonic speeds from the factory unit. kinda like a ford explorer full tilt.
-
The stock ex is 1,75-2 inch with some pretty shitty bends in it... It has a new cat but it (the system) appears pretty restrictive. I was thinking 2.25 with a chambered muffler... Its basically what calmini sells, but for like 450 bux. Id just take it from where the two manifolds merge and leave the new cat out and weld it back in when I need to do emmssions... Or just make a bolt in test pipe kind of thing....
Ive been reading and evidently it does really help them out. Just not sure what muffler to use to keep it from sounding gay... Then agaion I dont really give a fuck what it sounds like as long as its not raspy. I dont expect it to sound like a BBC with 3"x2 and flowbees
I put a new exhaust on my truck...well, cat back...about 5 months ago. I told the fucks to make it exactly what was on it, and of course they put this 1.5 OD bullshit on the truck. It corked it so bad its blowing welds out at other parts of the system. I am needing a new cross section. LMK what you do. I gotta do something, and probably real soon.
and those skid plates can be a real PITA to put on/take off. they sorta link together and the bolts get all crappy. You gotta take your time putting them back on or it just complicates things.
go get some diamond plate and make your own. O0
-
i put a thrush muffler on my trooper (86' 2.3L) after the cat and it's loud as hell. I've never put a thrush muffler on something and it still be this loud. Whenever I redo the exhaust it's getting 2 or 3 big mufflers.
-
fuck I hope we get serious snow this winter.
My Isuzu Trooper 4X4 Plowing Snow (http://www.youtube.com/watch?v=Lnw1RmO90f8#normal)
-
fuck I hope we get serious snow this winter.
My Isuzu Trooper 4X4 Plowing Snow (http://www.youtube.com/watch?v=Lnw1RmO90f8#normal)
;D
I cant wait man
-
Ya he was whining about that it was such a clusterfuck to take them (SKIDPLATES) off that he didnt want to fuck with putting them back on.
THE HMT diamondplate idea is a good one... wish i had access to a bending brake.... It would make it a lot easier... Like I said, im not reallyu worried about the driveshafts... Just the TC. The engine is tucked up pretty well and the Oil filter is tucked up and out of the way nicely up front.
As for the muffler situation... IDK... I like how flowmasters sound... Maybe a Cherrybomb and a flowbee... 2.25" I dont see it needeing 2.5, nor it helping the rasp.
Fucking thing is a GREAT TRUCK. iM A FAN.
-
Other than this guys tires hitting and suspension sounding like its going to fall off... I could totally live with this
Shit IF I get sick of it the stereo is definately loud ednough to turn up and drown it out, but its pretty mild... I dont want to do duals... Im thinking just pick up after the y poipe gfo 2.25 into the flowmastrer 40 series and 2.25 out the back.
http://s30.photobucket.com/albums/c337/Gizmo420/Rodeo%20blackout/?action=view¤t=ghetto1.flv (http://s30.photobucket.com/albums/c337/Gizmo420/Rodeo%20blackout/?action=view¤t=ghetto1.flv)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi30.photobucket.com%2Falbums%2Fc337%2FGizmo420%2FImg_0647.jpg&hash=94755bc00db3eccaa091d5f18f36559b231b1540)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi30.photobucket.com%2Falbums%2Fc337%2FGizmo420%2FImg_0646.jpg&hash=1ff3036e61498d788506329e9e323f08f15f49ed)
-
FATDADDYZ GETTIN' THA FLOWZZ!!!
Sad, really.
-
Go the RHMT route and make your own lift O0 Then drop a SBC in it and be prepared to pull your wallet out for some serious rooster tailing, snow throwing, gas guzzling action. LOL. Better yet just drop accord motor in it a modify accordingly
-
Nate can bend up the skid plates, you just have to buy the material
-
Cool. Im down....
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi40.photobucket.com%2Falbums%2Fe218%2F1320feet%2FImage009.jpg&hash=fa11a6148a721a67d98272692adeebed28f939b4)
-
Is that levi in a hospital room after ridintg your funcart in yer sigz???? LOLOLOL
-
Is that levi in a hospital room after ridintg your funcart in yer sigz???? LOLOLOL
i'm not sure about why he's there, but there are feces on his pillow