Topic: Bored today so took the slut(s) up to Stevens pass and broke em off in the snow (Read 15071 times)

jeffsciv23 · « **Reply #30 on:** October 29, 2009, 07:44:59 PM »

yeah mine is pretty loud but was reading on the other forums about the oil and filter change. i took it to a shop to have them check it out and see what they will charge to fix it. they said it wont hurt anythign to drive it liek that as long as i dont mind the noise but might have them fix it anyways. yeah its the 3.2 v6.

bigdaddyvtec · « **Reply #31 on:** October 29, 2009, 07:49:25 PM »

ya mine sounded like 1 or two lifters were sticking... But the oil change really did quiet it down... alot... No really tingy sounding ones anymore... Just a mild chatter of valvetrain,,, LOL.... It seems to be inhearant to the motor itself... They go wellll over 200 K thiough without issue regularly... Im going to wait till halfway through the winter before fucking with them... It quieted down alot to where its really not noticable anymore, or at least it doesnt sound BAD..... it did befoire and I was told that its the norm for that motor.

LOL

Mines got really peppy engine response for having the 31x10.50s on it... SOOO much more power than the ranger.

In 4 low its awesome!!!!

DRQPQUT · « **Reply #32 on:** October 29, 2009, 07:51:16 PM »

Quote from: DRQPQUT on October 29, 2009, 07:40:15 PM

that thing looks exactly like a isuzu rodeo i sold to a friend for 2gs out the door!!!!! and people dont trust used car salesman

jeffsciv23 · « **Reply #33 on:** October 29, 2009, 07:53:31 PM »

fuck i cant wait till it snows now lol. been kinda debating the front bull bar since these beaners over here cant drive worth a shit. i think i read somewhere that GM or dodge ones bolt right up, cant remember exactly which ones it was though.

bigdaddyvtec · « **Reply #34 on:** October 29, 2009, 08:00:46 PM »

Quote from: DRQPQUT on October 29, 2009, 07:51:16 PM

Quote from: DRQPQUT on October 29, 2009, 07:40:15 PM
that thing looks exactly like a isuzu rodeo i sold to a friend for 2gs out the door!!!!! and people dont trust used car salesman

Do you need a hug???

Ya the timing sure worked out on that huh??? :yes:

I went into Justins work mentioned i really wanted a 4wd for the winter... he showed me this one they had and were putting a new clutch and tob as well as all other tranny/ clutch related shit... I put the ranger up for sale that night. His boss held it for me....

It doesnt have 1 dent in it... Runs great is clean inside... Just a couple things I had to fix. EVERYTHING works (minus the rear drivers side window-but i have the new motor and regulator in the gartage)... Im really happy with it Gets about 20 per gallon.

bigdaddyvtec · « **Reply #35 on:** October 29, 2009, 08:03:17 PM »

Quote from: jeffsciv23 on October 29, 2009, 07:44:59 PM

yeah mine is pretty loud but was reading on the other forums about the oil and filter change. i took it to a shop to have them check it out and see what they will charge to fix it. they said it wont hurt anythign to drive it liek that as long as i dont mind the noise but might have them fix it anyways. yeah its the 3.2 v6.

books at 1.75 hours if i remember correctly from what DRQPQUT said

jeffsciv23 · « **Reply #36 on:** October 30, 2009, 12:23:44 AM »

doesnt sound too bad, ive heard its about $600 for it to be done from other people. i figure i spent 1700 on it and it has 114k on it and nice interior, even spending the 600 i would still consider it a decent price

j.h.christ · « **Reply #37 on:** October 30, 2009, 01:07:37 AM »

90turboteg · « **Reply #38 on:** October 30, 2009, 02:05:32 AM »

kind of off topic but i guess my buddy eric is buyin some parts off you spiker on saturday... anything to do around there. taken his super clean dx crx down...

bigdaddyvtec · « **Reply #39 on:** October 30, 2009, 02:54:40 AM »

Quote from: jeffsciv23 on October 29, 2009, 07:53:31 PM

fuck i cant wait till it snows now lol. been kinda debating the front bull bar since these beaners over here cant drive worth a shit. i think i read somewhere that GM or dodge ones bolt right up, cant remember exactly which ones it was though.

you got me lookin now.

Joseph Davis · « **Reply #40 on:** October 30, 2009, 03:15:11 AM »

Quote from: 90turboteg on October 30, 2009, 02:05:32 AM

kind of off topic but i guess my buddy eric is buyin some parts off you spiker on saturday...

Spiker's junk is always for sale.

bigdaddyvtec · « **Reply #41 on:** October 30, 2009, 03:23:14 AM »

hahahahahaha

being as I had right around 300 in the Ranger and sold it for 2200... And I bought this thing for 2k Licenced smogged etc out the door with BRAND NEW (3 miles when I picked it up) Clutch and almost new tires, and have dumped

5 QTS mobile 1 22
Oil filter 8
Fuel Filter 13
NGK spark plugs 12
Air filter 15
New windshield wipers (All 3) 22
Wiring for Amp (Kit deal) 20
Set of Mid grade tweeters 25 (on the dealz)

Free CD player
Free Eclipse 5 1/4 coax for the back
Woofers I got for doing valve adjustment

New window motor for rear drivers door (wndow doesnt work yet) and sun visors from Pick your part (Freebies)...

Im SUPPPPPER happy. :yes:

bigdaddyvtec · « **Reply #42 on:** October 30, 2009, 08:56:32 PM »

HMT Cold air intake will be in progress tomorrow... Aluminum using the M&N filter I used to have on the accord that wont fit anymore (and has been replaced with one that will)....

Supposedly they pick up about 10 HP or so from the C almini one... Well see... PIcs to come. Wont be turboing this thing though...

random-strike · « **Reply #43 on:** October 30, 2009, 09:20:41 PM »

wheeling is fun

dvst8r · « **Reply #44 on:** October 30, 2009, 09:22:35 PM »

Johnny your pics is blurry as fuck, but is that S-10 SAS'd?

bigdaddyvtec · « **Reply #45 on:** October 30, 2009, 09:37:06 PM »

Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT

Complex...

The Mesas and the Liberators that are on it work grrrrrrrrrreat... WOnt be needing tires anytime soon :O) I had a set of 35 " BFG ATs after my 35 MT Bajas on my 81 blazer and they do work great. Better than the MTs EVER didin either the mud or snow...

d112crzy · « **Reply #46 on:** October 30, 2009, 10:03:18 PM »

Quote from: jeffsciv23 on October 29, 2009, 07:53:31 PM

fuck i cant wait till it snows now lol. been kinda debating the front bull bar since these beaners over here cant drive worth a shit. i think i read somewhere that GM or dodge ones bolt right up, cant remember exactly which ones it was though.

My dads Camry is on its lasts legs. This will probably be its last winter, if you get what I'm saying.

:yes:

jeffsciv23 · « **Reply #47 on:** October 30, 2009, 11:28:56 PM »

Quote from: d112crzy on October 30, 2009, 10:03:18 PM

Quote from: jeffsciv23 on October 29, 2009, 07:53:31 PM
fuck i cant wait till it snows now lol. been kinda debating the front bull bar since these beaners over here cant drive worth a shit. i think i read somewhere that GM or dodge ones bolt right up, cant remember exactly which ones it was though.

My dads Camry is on its lasts legs. This will probably be its last winter, if you get what I'm saying. :yes:

lmfao, sounds like ill be following you out to the LT? because were leaving that bitch out there hahaha, only thing is people are going to be looking at you kinda funny rolling over the cattle gaurd with a helmet on

random-strike · « **Reply #48 on:** October 31, 2009, 01:38:32 AM »

Quote from: dvst8r on October 30, 2009, 09:22:35 PM

Johnny your pics is blurry as fuck, but is that S-10 SAS'd?

yes.

its 72 blazer 3/4 frame with a 94 sonoma body

random-strike · « **Reply #49 on:** October 31, 2009, 01:41:30 AM »

Quote from: bigdaddyvtec on October 30, 2009, 09:37:06 PM

Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT

very tightly.

but comfy in the dodge

random-strike · « **Reply #50 on:** October 31, 2009, 01:47:33 AM »

crackberries take bad photographs

jeffsciv23 · « **Reply #51 on:** October 31, 2009, 01:52:54 AM »

wish they would take fucking video lol, well at least mine doesnt.

random-strike · « **Reply #52 on:** October 31, 2009, 02:04:19 AM »

mine does, it sucks too

bigdaddyvtec · « **Reply #53 on:** October 31, 2009, 05:48:55 AM »

Quote from: c0mpl3x on October 30, 2009, 09:41:43 PM

Quote from: bigdaddyvtec on October 30, 2009, 09:37:06 PM
Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT

Complex...

The Mesas and the Liberators that are on it work grrrrrrrrrreat... WOnt be needing tires anytime soon :O) I had a set of 35 " BFG ATs after my 35 MT Bajas on my 81 blazer and they do work great. Better than the MTs EVER didin either the mud or snow...

but they fail on we roads pretty hardcore

O

I read the reviews on them too, but im telling you they do not. At least not on this thing. I have mesas on the rear and the liberators on the front. 80MPH in a hard ass downpour with lots of water on the ground... Maybe on a pickup or Jeep they suck, but theyre just duxcky on this thing and worked pretrty damn well in the 14" of snow the other day. I KNOW there are better tires, and Ill have a set, but not till these are done,

The more I drive this thing the more I like it.

Random Hero · « **Reply #54 on:** October 31, 2009, 06:00:25 PM »

Quote from: random-strike on October 31, 2009, 01:41:30 AM

Quote from: bigdaddyvtec on October 30, 2009, 09:37:06 PM
Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT

very tightly.

but comfy in the dodge

That sucks. IFS and a solid 12 mpg. should have got a diesel.

Joseph Davis · « **Reply #55 on:** October 31, 2009, 07:18:17 PM »

Quote from: bigdaddyvtec on October 31, 2009, 05:48:55 AM

The more I drive this thing the more I like it.

Coming from an Accord, I'm not surprised.

random-strike · « **Reply #56 on:** October 31, 2009, 11:32:11 PM »

Quote from: Random Hero on October 31, 2009, 06:00:25 PM

Quote from: random-strike on October 31, 2009, 01:41:30 AM
Quote from: bigdaddyvtec on October 30, 2009, 09:37:06 PM
Problem is that thing wears a bow tie... LOL...
SHIT JOHNNY HOW DO YOU FIT YOUR TUBBY ASS IN A NON xTRACAB SHIT

very tightly.

but comfy in the dodge

That sucks. IFS and a solid 12 mpg. should have got a diesel.

Ifs is fine for with what I want it for

It gets 12.6 in town and about 16 on the highway the hemi motor is badass I'd rather have a diesel but they are sooooo expensive.

jeffsciv23 · « **Reply #57 on:** November 01, 2009, 12:53:26 AM »

a friend of mine has a truck just like that and is pretty happy with it too

random-strike · « **Reply #58 on:** November 01, 2009, 01:05:37 AM »

they are fast for a truck. hemi motor is badass... new one makes even more power

mine is 345/390 i think the new ones are 390/390

bigdaddyvtec · « **Reply #59 on:** November 01, 2009, 03:24:46 AM »

This thread isnt about Dodge (TRUCK) fail... Its about ISUZU W1N!!!!!11!1!!111!1!! one. :yes:

Take the Ramfail elsewhere you tubby puppyfucker... HAHAHAHA

BTW... Where are complexes posts going???

News:

Author Topic: Bored today so took the slut(s) up to Stevens pass and broke em off in the snow (Read 15071 times)