:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: gooseman on January 03, 2010, 07:18:35 PM
-
The search engine on the site suck major balls.
Can one put vitaras in a d15? I got a mini-me and I'm finally turboing that shit. I would like to make it last.
-
Stop posting and SEARCH
-
YES
-
I would like to make it last.
get a good tune then
-
B16 rodzzz
-
B16 rodzzz
talk about rod knock!!!!!
-
Nonsense, that extra 5mm can be occupied by a couple slices of bologna.
-
Oscar Mayer Commercial -1973 (http://www.youtube.com/watch?v=rmPRHJd3uHI#normal)
-
jdm d15b vtec block
-
http://www.realhomemadeturbo.com/forum/Themes/default/images/english/help.gif (http://www.realhomemadeturbo.com/forum/Themes/default/images/english/help.gif)
-
Search like this.
www.google.com (http://)
why am I such a dumb ass noob site:realhomemadeturbo.com
-
Fjt is working on a set of rods for the us d15.
-
Fjt is working on a set of rods for the us d15.
I was quoted that 2-3 years ago. In this economy I highly doubt its actually going to happen.
Nothing against him atleast he is trying but I highly doubt it will ever happen.
-
hmmm, I was just thinking of using pistons. I didn't think of rods.
So b16 rods work? Or are you fuckig around? How about LS rods?
-
oczc as a set for the usdm. They hold 600 hp and are 99 shipped.
-
hungary.
now search ya puss pumper
-
oczc as a set for the usdm. They hold 600 hp and are 99 shipped.
Last set in stock? I just sold the motor I built with OCZC rods, that thing took a beating and kept on going. Best $100 I ever spent.
-
He makes them to your specs. What a rip off what other people are charging for rods.
-
http://www.realhomemadeturbo.com/forum/index.php?topic=9969.0 (http://www.realhomemadeturbo.com/forum/index.php?topic=9969.0)
-
http://www.realhomemadeturbo.com/forum/index.php?topic=9969.0 (http://www.realhomemadeturbo.com/forum/index.php?topic=9969.0)
thanks. Checking into it.
-
A d16 is all of $100 for a block - less if you find one with some issues that your build will fix. They'll be cheaper, make more power, spool faster, the works. If you're spending any money on a rhmt kit worth a damn, a built d15 (non-d15b) just doesn't make sense.
-
A d16 is all of $100 for a block - less if you find one with some issues that your build will fix. They'll be cheaper, make more power, spool faster, the works. If you're spending any money on a rhmt kit worth a damn, a built d15 (non-d15b) just doesn't make sense.
so far this is what i got.
ihi turbo of probe-free with stock down pipe
hf manifold with t/3 flange-40
manual boost controller-10
safcII-50
oem svo intercooler-15
blow off valve-free
still need feed lines, piping, 440's, arp h/s,good head gasket,flange adapter,clutch and boost guage not bad for 115 into it
-
no safc.
chip the ecu.
-
A d16 is all of $100 for a block - less if you find one with some issues that your build will fix. They'll be cheaper, make more power, spool faster, the works. If you're spending any money on a rhmt kit worth a damn, a built d15 (non-d15b) just doesn't make sense.
so far this is what i got.
ihi turbo of probe-free with stock down pipe
hf manifold with t/3 flange-40
manual boost controller-10
safcII so I can blow up my motor like a dumbass-50
oem svo intercooler-15
blow off valve-free
still need feed lines, piping, 440's, arp h/s,good head gasket,flange adapter,clutch and boost guage not bad for 115 into it
Interesting!
-
why do so many people still buy those things for hondas? 30 seconds of google searching on 56k dial-up will tell you that chipping is the only way. i just dont get it.
-
Because dialing in a few limited, poorly-named settings > "fucking up" via every conceivable option availible. Basicly if they're given less options, they think they have a lesser chance of blowing it up... :evil:
I'd rather spend $50 on a decent burner & rock a basic step retard, and have to "eyeball" the afr's. Actually that was my first setup, and was awsome.
-
Vitaras in a D15B VTEC with be .018" out of the hole.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi107.photobucket.com%2Falbums%2Fm307%2Fbonespec%2FHonda%2Fb7vitara-1.jpg&hash=40ac8131f15946b7ea14de5b8ba3647a967c3bad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi107.photobucket.com%2Falbums%2Fm307%2Fbonespec%2FHonda%2Fb7vitara-2.jpg&hash=fe181e907ad1df35cb700af36d51259a9fa398f5)
-
As far as the safc goes, I got it from a friend. He needed money, and I was just gonna be out 50 bones, so he gave this up. People have been doing it for years, I really don't see the problem.
It's like you telling me that a chipped ecu is the only way because its better than the safc. So is a "real turbo manifold" (log/ram) the only way, because its better then the HF manifold with adapter?
Ass Clown.
Vitaras in a D15B VTEC with be .018" out of the hole.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi107.photobucket.com%2Falbums%2Fm307%2Fbonespec%2FHonda%2Fb7vitara-1.jpg&hash=40ac8131f15946b7ea14de5b8ba3647a967c3bad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi107.photobucket.com%2Falbums%2Fm307%2Fbonespec%2FHonda%2Fb7vitara-2.jpg&hash=fe181e907ad1df35cb700af36d51259a9fa398f5)
ok, sweet. What rods are you using? Seems like the OCZC rods are the preferd option.
Can the tops of the pistons be taken down on a surface grinder. Wouldn't that allow more clearance and lower compression?
-
As far as the safc goes, I got it from a friend. He needed money, and I was just gonna be out 50 bones, so he gave this up. People have been doing it for years, I really don't see the problem.
That's because you're a fucking idiot.
Enjoy advancing timing under boost.
-
When you blow your shit because your timing is fucked from using the SAFC, don't come here fucking crying.
It's solid advice. A chipped ECU IS better, because you can actually tune the timing, fuel, etc.
A SAFC is a hack, nothing more.
-
fucking haters.
I will show you what REAL rhmt is about.
-
As far as the safc goes, I got it from a friend. He needed money, and I was just gonna be out 50 bones, so he gave this up. People have been doing it for years, I really don't see the problem.
That's because you're a fucking idiot.
Enjoy advancing timing under boost.
honestly we are giving you good advise. you probably already have a obd1 car/ecu. get it chipped for cheaper than you bought that safc..
sell the safc on ebay
buy chip kit from paul for $13
download crome free and be done.
honestly, i would even sell the safc and get a 12:1 fmu and a msd btm. but who am i to tell you?
-
fucking haters.
I will show you what REAL rhmt is about.
you stupid fucking piece of shit, you aren't going to show shit. you're in WA, right? i'd love to come watch you fail.
-
haters.
i lol'd
-
If you can't afford a burner then at least get the ecu chipped with a basemap. Then you can use the safc for some fine tuning if you really find it necessary. If you use dsm 450's your going to be pulling 44% ish of fuel from the ecu by tricking it into thinking there is less air than there is. When you do this the computer automatically advances timing causing a lean condition and detonation. Which will destroy your motor in no time.
A brand new burner and chip kit from moates is only $101
-
you're in WA, right? i'd love to come watch you fail.
According to his email, he's from GA
http://www.myspace.com/516040187 (http://www.myspace.com/516040187)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc2.ac-images.myspacecdn.com%2Fimages02%2F113%2Fl_db4199a48d55421fbff84a7e89d9fbd5.jpg&hash=a51fa0d2deef8053324f8782d94d90448658b3ce)
-
If you can't afford a burner then at least get the ecu chipped with a basemap. Then you can use the safc for some fine tuning if you really find it necessary. If you use dsm 450's your going to be pulling 44% ish of fuel from the ecu by tricking it into thinking there is less air than there is. When you do this the computer automatically advances timing causing a lean condition and detonation. Which will destroy your motor in no time.
A brand new burner and chip kit from moates is only $101
buy it from me and i will hook u up
-
If you can't afford a burner then at least get the ecu chipped with a basemap. Then you can use the safc for some fine tuning if you really find it necessary. If you use dsm 450's your going to be pulling 44% ish of fuel from the ecu by tricking it into thinking there is less air than there is. When you do this the computer automatically advances timing causing a lean condition and detonation. Which will destroy your motor in no time.
A brand new burner and chip kit from moates is only $101
buy it from me and i will hook u up
Lookee there gonna get the hookup!
Your build is otherwise fairly sound however your choice of engine management is currently terrible. Listen to the guys. Engine management is probably the most vital part of your build.
P.S. If you keep shitting on people that know what they are talking about and have multiple builds under there belt is one of the quickest ways to get banned from here. We want people that want to learn and have something to offer not just a bunch of unknowlegable douche bags. Don't believe me look for a guy named 1/2cocked he has a for sale post.
-
If you can't afford a burner then at least get the ecu chipped with a basemap. Then you can use the safc for some fine tuning if you really find it necessary. If you use dsm 450's your going to be pulling 44% ish of fuel from the ecu by tricking it into thinking there is less air than there is. When you do this the computer automatically advances timing causing a lean condition and detonation. Which will destroy your motor in no time.
^^^^^^^^^^^^^^^^^^^^ You can do a minor +/-5% fuel correction on a decent basemap and be fine as the timing skew is negligible.
-
Buk has a brother?
-
Chipped ecu's are for the ignorant
-
Chipped ecu's are for the ignorant
so using a bench grinder on pistons is for the retarded?
-
How can you compare afc's to log manifolds. Every manifold has it's place depending on car and goals. Afc's have no place in the Honda world. If you want to compare ems to manifolds, then Crome is the fence post manifold and ectune is a top mount. That's where your desicions should be made, not to chip or not to.
-
damn. These vitara builds are off the hook!!!
i just sent out 6 sets of rods today.
who would be down for some manifold/rod combo's. Im thinking 179 shipped for rods and either ramhorn/topmount combos. your pick. Let me know guys and I will make a post in the FS section.
-
First of all, fuck you guys. I am deleting that myspace account. Stalker fags.
Second, I don't know when you guys are fucking around or not, and it seems you can't tell when I am either. I was being sarcastic about the hater shit and the REAL rhmt setup. Jesus Christ.
ANd I am more then likely going to use this safc, so stop bitching. I see where you are coming from, but fuck it. If/when the motor goes, it goes. One day I will do a chipped ECU, but I want to get this damn thing boosted.
-
wiring in the AFC is harder than plugging in a chipped ecu.
dont worry, we will never stop preaching the chipped ecu. it IS the only way
-
First of all, fuck you guys. I am deleting that myspace account. Stalker fags.
Second, I don't know when you guys are fucking around or not, and it seems you can't tell when I am either. I was being sarcastic about the hater shit and the REAL rhmt setup. Jesus Christ.
ANd I am more then likely going to use this safc, so stop bitching. I see where you are coming from, but fuck it. If/when the motor goes, it goes. One day I will do a chipped ECU, but I want to get this damn thing boosted.
Shut the fuck up and post more porn.
-
the REAL rhmt setup. Jesus Christ.
do you say ATM machine too?
probably VIN number as well
-
tuna fish?
-
Shut the fuck up and post more porn.
Fuck off nigger lover.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.arrse.co.uk%2Fuploads%2Fforums%2Fswastika-sex-nazi_girl1.jpg&hash=21a03456fc48d1ad1547218c5a0461d492878004)
To you other fags, go learn how to read.
-
To you other fags, go learn how to read.
reading is overrated
-
To you other fags, go learn how to read.
reading is overrated
I honestly think that you believe that.
-
To you other fags, go learn how to read.
reading is overrated
I honestly think that you believe that.
Look the AFC-lover talks about thought as if he's capable of it.
-
PS post more porn.
-
stalker
His email is in his RHMT profile, I'm not a buk jr
-
Dude, you have quite a few very knowledgable people telling you that the afc hack is a poor excuse for engine management. I mean jesus fucking christ someone even said they would use an FMU over the AFC. If you're just going to shit on people's good ,fuck that, awesome advice. then you should leave here and go somewhere else because you are a hopeless noob who doesn't know good advice when it slaps you in the face. These people are trying to HELP YOU! Trying to ensure you enjoy your car and don't destroy the motor. If you understood the dynamics of a honda ecu and how it works you wouldn't even consider the AFC. But hey do what you want. We will expect carnage pics when you blow the motor though. This is all your gonna need if you decide to hang around using an AFC.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.justfocus.org.nz%2Fwp-content%2Fnoose225.jpg&hash=cf7422fee86de565001c3893c1fb990eb8f99768)
I'm done with this thread until this ignorant douche learns to listen.
-
Dude, you have quite a few very knowledgable people telling you that the afc hack is a poor excuse for engine management. I mean jesus fucking christ someone even said they would use an FMU over the AFC. If you're just going to shit on people's good ,fuck that, awesome advice. then you should leave here and go somewhere else because you are a hopeless noob who doesn't know good advice when it slaps you in the face. These people are trying to HELP YOU! Trying to ensure you enjoy your car and don't destroy the motor. If you understood the dynamics of a honda ecu and how it works you wouldn't even consider the AFC. But hey do what you want. We will expect carnage pics when you blow the motor though. This is all your gonna need if you decide to hang around using an AFC.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.justfocus.org.nz%2Fwp-content%2Fnoose225.jpg&hash=cf7422fee86de565001c3893c1fb990eb8f99768)
I'm done with this thread until this ignorant douche learns to listen.
Did you not read my last few posts? DoucheCookie.
-
Can't wait for Wednesday. Can we get an advance?
-
I think oczc is going to sponsor him so he cant be banned since oczc pays for this site.
-
how about sponsor someone that isn't a faggot?
-
I think oczc is going to sponsor him so he cant be banned since oczc pays for this site.
Man, you have NO idea how sweet that shit would be. I don't make much money in the tire game, so any thing that would make putting the car together cheaper would be awsome.
Go check out my biuld thread in the forced induction section.
-
Who goes to H-T anymore?
-
"Fuck Yo Couch Nigga" O0