How thick are the SRT intercooler cores?
I could probably stick a 1.5" or 2" thick core up front and have enough room, but I don't see hoy you could frun the hotside piping with AC.
I am only planning on 240-270 WHP at most.
It really depends on which bumper you have. The 88-89 style is not going to happen for 99% of people. It would take me some time to try and figure something out and it would not be ideal for almost everyone (sub 300whp MAX, ie: thin core).
The 90-91 bumper ( i have this one) is easier by 10 fold. the srt is about 2.5" thick and is less dense internallly then a similer sized garrett, precision, etc... So keep that in mind when you see tube and fin style cores. they can't support as much hp out the box/alone you could say. but nothing maybe some meth or something could help.
here is my modded srt4 intercooler. It has 2" outlets on there.
Here is the intercooler mounted with the 1.75" hot side piping tucked under the washer res.
I have mounted my full a/c system minus the condenser( this i new wouldn't fit without a aftermarket p/s cooler, if theres no p/s it could have stayed) and it all fits. You just need to be creative with routing the charge piping. These aren't eg/ek/dc's the normal stuff goes out the window.
Author
Topic: Anyone stick a FMIC in an ED hatch with AC? (Read 5500 times)