Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[walter]

what setup do i would can use for make a 4-1 collector? ill use 1.5  - 1.89OD .101thick steel.

i tried this:

Diameter 1
(cut tube) : 1.89

Wall Thickness
(cut tube) : 1.89

Diameter 2    : 1.5

Angle : 45

Offset : 0

i'd like some of you guys can help me with this, just i'd like to have this marked for begin cut pipes by tomorrow. ill make a cheap Ramhorm for my Z6 reubild in EF civic.

Hope your help!

[walter]

website:

http://metalgeek.com/static/cope.pcgi

[t_cel_t]

thats for making fish mouth cuts in round tubing.

all you need to do is set the saw for 12 or so degrees, make 1 cut. then spin the tube 90 degrees and make another cut.
i know theres a write up on here.

[t_cel_t]

http://weirtech.ca/howto-1.html

[walter]

I only have this 

[Uncle Fester]

A HF chop saw (under $100) and a jig can do it. I wouldn't even try it with an angle grinder.

[2slow]

I've tried it with an angle grinder but it never works out well