:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Daspoop/Trevor YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: Custom taillight leds  (Read 3416 times)

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Custom taillight leds
« on: April 09, 2009, 08:01:19 PM »

hi, i was looking for make my own custom taillight leds for my civic EF 90 hatback.

Im waiting already for PCB board (12) i ordered for leds.

the problem i have right now is about leds, i was looking on ebay and found this:

http://jbrlsr.com/?aid=5336118848&bid=3196509&url=http%3A%2F%2Fjbrlsr.com%2F%3Faid%3D5336118848%26bid%3D3196509%26url%3Dhttp%253A%252F%252Fcgi.ebay.com%252F100PCS-8MM-SUPER-BRIGHT-RED-DIFFUSED-LED-LAMP-NEW-F-R_W0QQitemZ190213460316QQcmdZViewItemQQptZLH_DefaultDomain_0%253Fhash%253Ditem190213460316%2526_trksid%253Dp4634.c0.m14.l1262

I want to make tailight and turn signals..so i was in the point to order 100 red leds, 50 white leds and 50 yellow reds, they say includes resistor for working on 12V so should works on the car.

The problem is about if those will works just installing each resistor to each led , i means if they will works with brake light too , if they will bright more of do i need another resistor or what really ill need.

i found this ones too with more MCD

http://cgi.ebay.es/100X-New-5mm-Super-Bright-Red-LED-Lamp-35-000mcd-FS_W0QQitemZ250402368429QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item250402368429&_trksid=p3911.c0.m14&_trkparms=72:1315|66:2|65:12|39:1|240:1318

Ill appreciate a lot any input/help

Thanks
« Last Edit: April 09, 2009, 08:07:20 PM by walter »
Logged

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Custom taillight leds
« Reply #1 on: April 09, 2009, 08:22:43 PM »

i assume ill not get any help there..


thx.
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: Custom taillight leds
« Reply #2 on: April 09, 2009, 08:29:58 PM »

If you set it up as a series paralell circuit, you need one resistor per series circuit.  That way, if one burns out, it will only render one series of LED's inoperative.   Either of these circuit types should work

Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: Custom taillight leds
« Reply #3 on: April 09, 2009, 08:31:27 PM »

Obviously not 24v

The first circuit will isolate any LED should it burn out so that it is the only one that will be out, however the extra current is added to the LED's that are paralell to the one that burned out and if not maintained could burn the rest out.

I would try a variable resistor to determine your brightness,  Start off with the highest restatance and progress down till your happy with the intensity.
« Last Edit: April 09, 2009, 08:35:53 PM by Conceptz-X »
Logged

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Custom taillight leds
« Reply #4 on: April 09, 2009, 08:56:48 PM »

thx for your help

really i have not much idea about how to do this, i know weld and so but, then, what leds of links i post above should i buy? they comes with resistence for works on 12V, if that enought for this?
Logged

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: Custom taillight leds
« Reply #5 on: April 09, 2009, 09:24:25 PM »

If your wanting to try it, go for it. 

This half-assed diagram I made might give you an idea on how to wire it.  I can help you out more later if you decide to do it.
Logged

turbogeek

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 16
Re: Custom taillight leds
« Reply #6 on: April 09, 2009, 09:27:27 PM »

you been here yet?
search it and you'll find everything you need to know.
http://www.hidplanet.com/forums/
Logged
jap bitches: for when no other cumdump will do the sick thing you just thought of

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: Custom taillight leds
« Reply #7 on: April 09, 2009, 09:35:55 PM »

This isn't a Rick P forum is it?  I see you need to sign up to get acess to the threads

You need a NOOB post even if you bring good info
Logged

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Custom taillight leds
« Reply #8 on: April 10, 2009, 07:56:04 AM »

If your wanting to try it, go for it. 

This half-assed diagram I made might give you an idea on how to wire it.  I can help you out more later if you decide to do it.

nice! ok, i was talking with a guy that do samething on antoher car.

said me he used a LM317 for dual bright.. he used one with regulator for get bright i need and low to 6v for low I and for brake like i assume 12v or so.

i was learning yesterday about this things (i like this kind of electronic lol) and made this for know what resistor i need for low to 6V

and:

12-6/0.020A (20mA is use LED, says this on description): and i got 300ohm.

ok then using a LM317 with 300ohm for get 6v is Ok if im right, but what i dont know is how to connect it, well really i think i know how should go



civic has two wires for low and brake light, so ill need two LM317s?
Logged

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Custom taillight leds
« Reply #9 on: April 10, 2009, 08:01:31 AM »

btw, i ordered already 250leds ( 100red, 100 yellow and 50 white ones) and PCBs boards are in the way going here.  :yes:

ill do it for sure.


Logged

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: Custom taillight leds
« Reply #10 on: April 10, 2009, 10:01:58 AM »

well i want to see a write up
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6786
  • I look around and all I see is Smegheads
Re: Custom taillight leds
« Reply #11 on: April 10, 2009, 10:48:14 AM »

In for a write up when you get there. ;D

hotrex

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 13021
  • rough riding niggas since 2002
Re: Custom taillight leds
« Reply #12 on: April 11, 2009, 01:44:51 AM »

this a serious waste of ur time and money. good thing your a worthless euro faggotniglitanus
Logged
1. nbspnbsp choda nbspnbsp 584 up, 134 down
 area between your bag and your asshole
Johnny bliss'#039#039s mom really worked my choda yesterday, I wont be able to ride my bike for a week

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Custom taillight leds
« Reply #13 on: April 11, 2009, 01:58:54 AM »

this a serious waste of ur time and money. good thing your a worthless euro faggotniglitanus

Sorry I think your the most worthless person on this site with your crack mani's and fail shipping skills :P
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

BoostedSchemes

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 18561
  • ☂BloodRaincoat☂
Re: Custom taillight leds
« Reply #14 on: April 11, 2009, 02:08:11 AM »

s L a W j C: wanna hear a funny joke?
BoostedSchemes: sure
BoostedSchemes: i hope its about aids
s L a W j C: i charged u full price for a piece of shit nigger log manifold i welded at 2am piss drunk and with a chinese tig and no filler rod.   i then used that money to buy supplies to build 3 more manis niggas paid for and never got
BoostedSchemes: thats not a joke, thats business
s L a W j C: i had a hard time looking at you when i handed over that steamy pile
s L a W j C: then i realized you were russian and u deserved it

Logged
All posts before 8am and after 3pm are produced under the influence of alcohol.


Major Loser, please tell me how to be smart and interesting like you~

Corey

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3030
Re: Custom taillight leds
« Reply #15 on: April 11, 2009, 02:10:43 AM »

god were we dying when he wrote that. i couldnt breathe for 5 mins.

Logged

BoostedSchemes

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 18561
  • ☂BloodRaincoat☂
Re: Custom taillight leds
« Reply #16 on: April 11, 2009, 02:20:06 AM »

I used to be amused when he would bring it up every few weeks but he keeps changing the story so its not as funny knowing half the time he's just spewing shit so people find him amusing  :?:
Logged
All posts before 8am and after 3pm are produced under the influence of alcohol.


Major Loser, please tell me how to be smart and interesting like you~

Corey

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3030
Re: Custom taillight leds
« Reply #17 on: April 11, 2009, 02:35:21 AM »

the first half was true, there were witnesses to that.
Logged

hotrex

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 13021
  • rough riding niggas since 2002
Re: Custom taillight leds
« Reply #18 on: April 11, 2009, 02:44:39 AM »

this a serious waste of ur time and money. good thing your a worthless euro faggotniglitanus

Sorry I think your the most worthless person on this site with your crack mani's and fail shipping skills :P

i get bukwild in your moms paraneum
Logged
1. nbspnbsp choda nbspnbsp 584 up, 134 down
 area between your bag and your asshole
Johnny bliss'#039#039s mom really worked my choda yesterday, I wont be able to ride my bike for a week

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Custom taillight leds
« Reply #19 on: April 12, 2009, 05:15:08 PM »

this a serious waste of ur time and money. good thing your a worthless euro faggotniglitanus

 :D
Logged
Pages: [1]   Go Up