:::RHMT::: RealHomeMadeTurbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: B16 diff in GSR transmission  (Read 14341 times)

hamburgler

  • Full Member
  • ***
  • Offline Offline
  • Posts: 96
B16 diff in GSR transmission
« on: April 22, 2009, 11:15:03 PM »
Ive got a Quaife LSD in my b16.  The gears and syncros are shot, so I plan to put this LSD in my other GSR tranny.

Will the b16 LSD literally swap over, or do I need to get a different style of bearing to put the b16 LSD in a GSR tranny?

Also, if someone has a blown up diagram of a GSR tranny with part numbers that would be great.

Since its off right now, I plan to do the diff bearings, and the main and counter shaft bearings.
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: B16 diff in GSR transmission
« Reply #1 on: April 23, 2009, 12:47:49 AM »
the ring gears on B16 and GSR trannys are diff.. if you keep the ring gear on it you should be legit...
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

hamburgler

  • Full Member
  • ***
  • Offline Offline
  • Posts: 96
Re: B16 diff in GSR transmission
« Reply #2 on: April 23, 2009, 01:25:45 AM »
What about the GSR tranny having a tapered roller bearing at the diff and the B16 doesn't...or at least it looks as thought it doesn't.
Logged

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: B16 diff in GSR transmission
« Reply #3 on: April 23, 2009, 04:32:56 AM »
knock the GSR tapered outer races out, installed the B16 Quafie, shim as needed.
Logged
OG before the OG'#039#039s
Pages: [1]   Go Up
« previous next »