:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Official RHMT TANK! that's right i said a TANK! (link)

Pages: [1]   Go Down

Author Topic: Quench + boost  (Read 3312 times)

mrgreengenes

  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
Quench + boost
« on: November 03, 2012, 05:51:50 PM »
So i have these set of 84mm high comp arias slugs, that i am contemplating using in a mitsu 4g61 (82.3mm).  With this setup, the pistons would be 2.5mm below deck.  Anyone who's anyone knows that the mistu DOHC heads have nice quench pads.  Calculated comp ratio goes from a stock 8.0:1, to an 8.4ish. 
Good idea? 

Pin offset is another thing to think about... i may flip the pistons.  Just musings....

Logged
Pages: [1]   Go Up
« previous next »