Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mrgreengenes]

So i have these set of 84mm high comp arias slugs, that i am contemplating using in a mitsu 4g61 (82.3mm).  With this setup, the pistons would be 2.5mm below deck.  Anyone who's anyone knows that the mistu DOHC heads have nice quench pads.  Calculated comp ratio goes from a stock 8.0:1, to an 8.4ish. 
Good idea? 

Pin offset is another thing to think about... i may flip the pistons.  Just musings....