Don't think ive ever had a build thread on HMT, so here is the latest project. Hopefully it will be finished in a month or so.
Picked up an '88 DX hatch from a member on d-series 2 weekends ago, got a pretty good deal on it. Only real drag is the 8hrs round trip I had to make to get it, no biggie though. He threw in a obd0-obd1 mpfi conversion harness, so I couldnt pass up the deal. I paid $400 cash and a small trade for it.
Pics of the car:
Coming home
Where she sits until the motor is finished and the title is in my name
Interior
As far as what motor is going into it...I'll be re-building my rod/piston a6 and transplanting it into the hatch along with the turbo kit from the CRX.
Motor is an a6 that I picked up locally. Guy said that it had a slight knock, and it turns out the #2 bearing was toast, but hadn't spun. rod was fine, and crank looked like it could be re-used no problem...but I'll be using the crank out of the last build just to be sure.
When I tore it down, still had crosshatch marks from the factory....with 250k on the clock
Front
Back
My 5 minute notching job
Motor fresh from the machine shop
75.5mm bore, with a .0035 P2W clearance for the SRPs
Sexiness
Today I got the bottom end assembled. Rings filed and all bearings plastigauged. New main bearings, but I'll be re-using the rod bearings because they still look perfect and I know the clearances are good.
All in all, I got the bottom end all assembled, rear main seal bolted on, water pump and oil pump bolted up, and oil pickup installed. Need to pull the engine out of the CRX so I can pull the head and oil pan and complete the assembly.
Plastigauging the mains
Rods/pistons installed
Rods torqued
Girdle torqued down
bang bang!! The 3rd time around for these pistons
Author
Topic: Ryan's project: Slutbox (Read 8146 times)