:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Official RHMT TANK! that's right i said a TANK! (link)

Pages: [1]   Go Down

Author Topic: DSM 450's  (Read 5279 times)

redboy183

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
DSM 450's
« on: October 19, 2009, 07:52:38 AM »

can anyone get a perfect idle with these fucking things. my car has gone through 5 different maps and its the same idle bs every time, i.e. it sputters or just shuts off no matter if its hot or cold engine wise. my gsr ran fine with the stock injectors but i wanted to put these in right before boost to eliminate one less thing to do but they wont work right for me for shit...my buddy has had 450's in his las na for over a year and had none of these issues..i also checked for mechanical issues like a vacuum leak or the idle screw being messed up, the fast idle is screwed in, and so forth
Logged

Teg2boo

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4261
Re: DSM 450's
« Reply #1 on: October 19, 2009, 08:29:14 AM »

Everybody get a perfect idle with these. Maybe they need to be cleaned... What is your motor? Post your bin.

Logged


damn you guys too? its a fucking forum not a court room!
 Its not a forum its a gang.  

Robb

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4624
  • Meat Popsicle
Re: DSM 450's
« Reply #2 on: October 19, 2009, 10:07:15 AM »

Did you check for vacuum leaks at the injector seals themselves?  Post up the .bin
Logged

blowoff valves are for pussies.

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662
Re: DSM 450's
« Reply #3 on: October 19, 2009, 11:43:46 AM »

Shitty idle does not tell us much.

I had issues with mine, but it turned out that the idle section of my map was way too lean for some reason.  Did you even look at the first page in this section or try to search at all?

redboy183

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
Re: DSM 450's
« Reply #4 on: October 19, 2009, 07:56:31 PM »

I don't have the .bin for it, my buddy helps me out with the maps. the motor is a gsr with eagle h beams, CP pistons, blockguard(i know i know) skunk 2 retainers and dual valve springs with ferra exhaust valves. He actually also told me the same info and until i get my turbo on there when its ready for a real tune to not worry about it so i guess i have to go from there....thanks for the help its been very informative!
Logged

jagojon3

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: DSM 450's
« Reply #5 on: October 19, 2009, 08:50:37 PM »

Your injectors are not causing your shitty idle unless they are physically damaged or dirty. I've used 4-5 sets of them with perfect idles every time.
Logged

Turkey soup pancakes sir

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: DSM 450's
« Reply #6 on: October 19, 2009, 11:24:41 PM »

He actually also told me the same info and until i get my turbo on there when its ready for a real tune to not worry about it

Yeah, I wouldn't worry about breaking in a built engine or the damage/premature wear that results from running it for a long time with the tune fucked up.  Hell, you don't even need to plug the ECU in for what your setup is without the turbo, since it's not "real" or anything.

Cadracer

  • Full Member
  • ***
  • Offline Offline
  • Posts: 115
Re: DSM 450's
« Reply #7 on: October 20, 2009, 12:01:41 AM »

He actually also told me the same info and until i get my turbo on there when its ready for a real tune to not worry about it

Yeah, I wouldn't worry about breaking in a built engine or the damage/premature wear that results from running it for a long time with the tune fucked up.  Hell, you don't even need to plug the ECU in for what your setup is without the turbo, since it's not "real" or anything.
You are the urban verbal assault wizard...LOL ;D
Logged

DmC

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3036
Re: DSM 450's
« Reply #8 on: November 22, 2009, 06:59:07 AM »

LOLz It's harder to make dsm 450's idle rough then it is to have them Idling smooth. Like everyone else said. Damaged or dirty injectors or someone is trying to rock a basemap or something.
Logged

d112crzy

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3449
  • white power
    • CrzyTuning
Re: DSM 450's
« Reply #9 on: November 24, 2009, 03:50:36 AM »

They even idle smooth on stock ecu's for fucks sake.
Logged
www.crzytuning.com


Nobody comes into my house and shits all over it.  

chris

  • Guest
Re: DSM 450's
« Reply #10 on: November 24, 2009, 05:21:17 AM »

Im sending in a set of 450's I have laying around to get cleaned. Im kinda interested to see how 125,000 mile dsm injectors really hold up.
Logged
Pages: [1]   Go Up