:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: Help with crome basemap  (Read 22557 times)

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Help with crome basemap
« on: March 19, 2009, 07:40:40 PM »

    Hey guys, I just started to tune my car (b18b-450-t3/t04e).  Now I've been using a basemap called "ls-450's-t25-7lb " and it's been working great for my motor and turbo. My a/f ratios are 14ish and about 11.3 in 5 lbs of boost.  The only problem is when I turn up the boost to 10 lbs it's a bit lean 11.9-12.1.  All I want to do was richen it up a bit.

New her is my question after the changes I made the a/f ratio went up to 13.9-14.6.  No matter what I did I COULD NOT get the a/f ratio down.  I added more fuel and even had the timing down to 6 degrees and still got 13.8 to 14.3 a/f ratio at 10 psi. 

I made the changes on my home PC and I must have changed the chip like twenty times.  Every time I made a change to the basemap the result was the same 14ish a/f ratios.  Please help

obd1 p75 with free crome

Dweezil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 107
    • Michigan Civics
Re: Help with crome basemap
« Reply #1 on: March 19, 2009, 08:12:34 PM »

Have you disabled the O2 sensor and tried it that way?
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: Help with crome basemap
« Reply #2 on: March 19, 2009, 08:23:16 PM »

Your fine with your afrs at 11.9-12.1 just go back to your basemap
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: Help with crome basemap
« Reply #3 on: March 19, 2009, 08:43:47 PM »

Have you disabled the O2 sensor and tried it that way?

+2
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: Help with crome basemap
« Reply #4 on: March 20, 2009, 09:00:55 PM »

The O2 sensor is disabled!  Plus Its not even wired to my ecu.  The only part that's aftected is where I make my changes, the rest stays the same.  I remember a screan shot of a something called target a/f ratios but can't seam to find it in crome. 

The only reason I wanted lower a/f ratios is becouse it gets up to 120+ in the summer here.

Thanks guys any futher help whould be apreciated.
« Last Edit: March 21, 2009, 12:24:33 PM by snarf »
Logged

Dweezil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 107
    • Michigan Civics
Re: Help with crome basemap
« Reply #5 on: March 20, 2009, 09:05:49 PM »

Timing is more important than fuel with higher air temps. Just pull a degree or two to be safe.
Logged

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: Help with crome basemap
« Reply #6 on: March 20, 2009, 09:54:50 PM »

are you using Crome free or pro crome pro has target afr its the green A type symble
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: Help with crome basemap
« Reply #7 on: March 21, 2009, 12:27:41 PM »

crome free. I really want to be able to tune my own maps more than anything.  Has anyone ever had a similar problem?  Thanks guys

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: Help with crome basemap
« Reply #8 on: March 21, 2009, 12:41:31 PM »

What version of crome are you using?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: Help with crome basemap
« Reply #9 on: March 21, 2009, 12:45:18 PM »

1.5.0

turbo4life

  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1734
  • trying to get a college education.
Re: Help with crome basemap
« Reply #10 on: March 22, 2009, 03:55:21 AM »

return to your previous setting 11.9 12.1 is perfect reduce the timing a touch.. *higher air temperatur*  :evil: knock
Logged
ILL KEEP MY GUNS, FREEDOM &ampamp MONEY....YOU CAN KEEP THE "quotquotCHANGE"quotquot

NO BOOSTED RIDES!! dont drive a honda no mo!!!! miss that shit!!!

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: Help with crome basemap
« Reply #11 on: March 22, 2009, 08:24:18 PM »

so you were at 11.9-12.1 at 10psi, then you added fuel and now it's even leaner?  :?:
Logged

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: Help with crome basemap
« Reply #12 on: March 25, 2009, 06:44:59 PM »

Yea, must be something wrong with crome since no one else has had this problem.  I'll try to reinstall it and make my own basemap.  I'll let you guys know when I fix it.
Pages: [1]   Go Up