:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: Finally getting started... Build Thread ***NSFW***  (Read 7649 times)

senatorstains

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 33
Finally getting started... Build Thread ***NSFW***
« on: September 15, 2010, 02:13:49 AM »

Ok so I finally picked up a car to turbo. I had that SOHC d16a6 all ready to go but then I came across this thing for cheap. The shitty part is that the guy dropped an LS non-vtec in it. I have heard that stock ls's turbo pretty well though as long as you keep the boost down to around 10 psi (correct me if Im wrong) Heres what I got for $1900:

1994 Acura Integra GS-R













I picked that up on Sunday, yesterday I came across a killer deal. An HX-35 completely rebuilt with 0 miles on it, for $200.





I figured I would salvage as much as I could from my d16 build (intercooler, piping, wastegate, BOV, etc.) and have fun with this one. So Im picking up a cast iron manifold tommorow because this turbo is so damn heavy (im gonna brace it anyway). All I need now is injectors, boost controller, oil line kit (im gonna hit up stealthmode), random shit for vacuum lines and other shit i cant remember. So I know there isn't much in the way of pictures but its a start. Id like to hear what you guys have to say about running this HX on a stock LS.
« Last Edit: September 29, 2010, 09:30:38 AM by crxvtec91 »
Logged

senatorstains

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 33
Re: Finally getting started... Build Thread
« Reply #1 on: September 15, 2010, 02:31:46 AM »

To clarify its a Hx35W.
Logged

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: Finally getting started... Build Thread
« Reply #2 on: September 15, 2010, 10:57:27 AM »

Nice tail lights....   :?:
Logged

senatorstains

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 33
Re: Finally getting started... Build Thread
« Reply #3 on: September 15, 2010, 12:08:26 PM »

It was pretty beaner-ized when I picked it up. Looked a lot worse a day or so ago. I want stock ones but they are expensive. It looked like the guy went on a shopping spree at pepboys.
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Finally getting started... Build Thread
« Reply #4 on: September 15, 2010, 12:46:28 PM »

Lose all the rice, and then sell that turbo to AJ

Tail lights are fucking dirty cheap! You low ball the fuck out of people, pretty simple shit.

As far as the LS, boost the fuck out of it. And post lots of porn. Then we might consider you staying around
« Last Edit: September 15, 2010, 12:47:59 PM by glustic »
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7370
Re: Finally getting started... Build Thread
« Reply #5 on: September 15, 2010, 12:55:34 PM »

Post was deleted by me because you didnt follow through with nudes in this thread!!
« Last Edit: September 17, 2010, 12:26:01 PM by ratcityrex »
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Finally getting started... Build Thread
« Reply #6 on: September 15, 2010, 01:09:00 PM »

Now since he posted good info, you NEED to sell him HIS turbo
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

senatorstains

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 33
Re: Finally getting started... Build Thread
« Reply #7 on: September 15, 2010, 01:26:13 PM »

I get off at 430 ill load this motherfucker up with porn then. It's impossible to pull up porn with these computers at work. As far as a good tune, do you guys know of anyone in SoCal that would be able to do that?
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Finally getting started... Build Thread
« Reply #8 on: September 15, 2010, 01:48:21 PM »

Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

chris

  • Guest
Re: Finally getting started... Build Thread
« Reply #9 on: September 15, 2010, 03:25:54 PM »

Um thats sacramento a 7 hour drive from LA. Church is the most well known Honda guy down there and his rates show it. Guy has owned that dyno for 10+ years



whitfield is down there also.
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Finally getting started... Build Thread
« Reply #10 on: September 15, 2010, 03:49:34 PM »

Yeah I know it is foo, trying to help a  O0 out
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

senatorstains

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 33
Re: Finally getting started... Build Thread
« Reply #11 on: September 15, 2010, 06:04:34 PM »

Anybody know how I can find this guy Church? Shop name?
Logged

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: Finally getting started... Build Thread
« Reply #12 on: September 15, 2010, 06:10:30 PM »

Shawn Church, Church automotive iirc.
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: Finally getting started... Build Thread
« Reply #13 on: September 15, 2010, 10:31:25 PM »

I have stock tail lighs....  want to buy em?
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7370
Re: Finally getting started... Build Thread
« Reply #14 on: September 15, 2010, 11:41:35 PM »

So where's the porn?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Finally getting started... Build Thread
« Reply #15 on: September 16, 2010, 12:23:59 AM »

So where's the porn?

+1, we need at a minimum lesbian porn
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

DasPoop

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1761
Re: Finally getting started... Build Thread
« Reply #16 on: September 16, 2010, 12:26:11 AM »

So where's the porn?

+1, we need at a minimum lesbian porn

min lesbian porn?? you going gay on us i would rather see lesbian porn over dick pussy porn
Logged
Na mike:"quotquotthe one i had was a real bbw, not just a fat chick, but a huge fat chick"quotquot

theidealone

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 670
Re: Finally getting started... Build Thread
« Reply #17 on: September 16, 2010, 01:54:04 AM »

It was pretty beaner-ized when I picked it up. Looked a lot worse a day or so ago. I want stock ones but they are expensive. It looked like the guy went on a shopping spree at pepboys.

I think Ive got a set in the garage for some reason. Never owned an Integra. LOL. Id have to look though.
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Finally getting started... Build Thread
« Reply #18 on: September 16, 2010, 05:13:57 PM »

So where's the porn?

+1, we need at a minimum lesbian porn

min lesbian porn?? you going gay on us i would rather see lesbian porn over dick pussy porn

Theres suppose to be a comma after minimum. You fucktard. meaning that he better post lesbian porn, and nothing else....
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6767
  • I look around and all I see is Smegheads
Re: Finally getting started... Build Thread
« Reply #19 on: September 17, 2010, 08:46:25 AM »

So where's the porn?

+1, we need at a minimum lesbian porn

min lesbian porn?? you going gay on us i would rather see lesbian porn over dick pussy porn

Theres suppose to be a comma after minimum. You fucktard. meaning that he better post lesbian redhead porn, and nothing else....

Corrected for what I like to see.  ;D

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Finally getting started... Build Thread
« Reply #20 on: September 17, 2010, 12:11:13 PM »

So where's the porn?

+1, we need at a minimum lesbian porn

min lesbian porn?? you going gay on us i would rather see lesbian porn over dick pussy porn

Theres suppose to be a comma after minimum. You fucktard. meaning that he better post lesbian redhead porn, and nothing else....

Corrected for what I like to see.  ;D
Haha. Any snatchel shots will do. Hopefully plugged by another female
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7370
Re: Finally getting started... Build Thread
« Reply #21 on: September 17, 2010, 12:29:05 PM »

I will save this thread!!! I hope this fucken guy opens this at work and gets totally fucked since I gave him the rundown on info and he didn't follow through with porn!!









































































































Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

Tim

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2632
Re: Finally getting started... Build Thread
« Reply #22 on: September 17, 2010, 01:02:40 PM »

I just opened it at work



And I aprove
Logged

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: Finally getting started... Build Thread
« Reply #23 on: September 17, 2010, 01:22:18 PM »

I just opened it at work



And I aprove

+1
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

SloS13

  • RHMT Ex-President
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: I am a geek!!
  • My avatar is broken
Re: Finally getting started... Build Thread
« Reply #24 on: September 28, 2010, 09:42:02 PM »

Besides some oversized images, that is pure pr0n win right there.
Logged

boosted 00 black si

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1560
Re: Finally getting started... Build Thread
« Reply #25 on: September 28, 2010, 11:41:50 PM »

thats better  :noel:
Logged
go fuck your self

BORN TO BOOST
LITTLE B16.400whp on 16psi

SOHCKLR657

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 420
  • D-Series 10LBS Will Turn Ya Out!
Re: Finally getting started... Build Thread
« Reply #26 on: September 29, 2010, 02:04:40 AM »

tHIS tHREAD dELIVERS :)  :yes:
Logged

Holy mother of all that is cheesy and burgery, Sohclikr... YOU ARE A FAT FUCK YOU FAT FUCK.

 88 4DR DX... You Will See... D15B Powered Where'#39#39s My Powder, Come On Wit It! http://www.quizmasters.biz/Pub%20Genius/Mr_Men/Characters/Mr%20Rude_01.png

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Finally getting started... Build Thread
« Reply #27 on: October 03, 2010, 10:55:55 PM »

Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK
Pages: [1]   Go Up