:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: [1]   Go Down

Author Topic: Honda Logo VTEC Swap mini-me, some problems  (Read 5956 times)

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Honda Logo VTEC Swap mini-me, some problems
« on: August 29, 2016, 05:34:52 AM »
Hi, i swap a Y7 block with Z6 head into a Honda Logo 99 year (obd2b), engine was working in a EG5 Civic, not cel, everything good aparently.

Used harness converssion, replaced just the "exterior parts" of the dizzy for to keep the small dizzy plug.

Ok, everything is good except i get CEL14 that is IACV. Idle is good though, but the main problem is whe i accelerate it let say 10-15% TPS, between 1.000-2.000 rpm, engine fail, when i accelerate a bit more, engine revs more and everything is ok. i checked tps and it's good, could IACV cause this error? here some videos i made.

revs problem.

https://www.youtube.com/watch?v=_4RehUYtZ6A

14CEL

https://www.youtube.com/watch?v=HWR-te3iIpI

any input?
Logged

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6789
  • I look around and all I see is Smegheads
Re: Honda Logo VTEC Swap mini-me, some problems
« Reply #1 on: August 29, 2016, 10:57:19 PM »
IACV plug swapped with TPS?  :noel:
Logged

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Honda Logo VTEC Swap mini-me, some problems
« Reply #2 on: September 03, 2016, 10:11:56 AM »
finally found problem, was one iacv wire that goes to ecu..
Logged
Pages: [1]   Go Up
« previous next »