:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

BDVT's BroDozzer gets compound twin turbos!... (link)

Pages: [1]   Go Down

Author Topic: Solid CEL = dead ECU?  (Read 5218 times)

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Solid CEL = dead ECU?
« on: May 22, 2010, 08:55:15 PM »
Fixed one problem and got another.

Car was running weak and sounding weird because the cam gear bolt backed out along with the key, which chewed up the notch in the cam and the key.

Replaced the cam and key, runs like normal again EXCEPT vtec doesn't work and at about 7000 rpm it feels like it hits a rev limiter.

I have a solid CEL whether the SC is jumped or not.  Tried resetting by disconnecting the battery for 15 minutes and still have it.

Any other causes?  Anyone got a chipped P28 for sale?
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: Solid CEL = dead ECU?
« Reply #1 on: May 22, 2010, 09:58:14 PM »
What ecu r u running? Is it chiped?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: Solid CEL = dead ECU?
« Reply #2 on: May 22, 2010, 10:08:36 PM »
Chipped P28.

Verified the ROM with my Willem, and it passed verification.

Erased the chip, and reflashed with offset 8000 and now the CEL stays on solid no matter what and it idles 1250-1500 even when warm.
Logged

jagojon3

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: Solid CEL = dead ECU?
« Reply #3 on: May 22, 2010, 10:13:08 PM »
Just to be sure, try another chip. I've had them go bad for no apparent reason before.
Logged

Turkey soup pancakes sir

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: Solid CEL = dead ECU?
« Reply #4 on: May 22, 2010, 10:22:01 PM »
Quote from: jagojon3 on May 22, 2010, 10:13:08 PM
Just to be sure, try another chip. I've had them go bad for no apparent reason before.

Do you know offhand if this is something my local radioshack may have in stock?

Wouldn't verification fail on the Willem if the chip was bad?
Logged

jagojon3

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: Solid CEL = dead ECU?
« Reply #5 on: May 23, 2010, 12:24:26 AM »
Doubt RS has them, you can get a 5 pack on ebay cheap, better yet see if someone here has some spares. You should always keep a few spare chips around.

Not sure about the willem verify
Logged

Turkey soup pancakes sir

Joseph Davis

  • Verbal Assault Technician
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Solid CEL = dead ECU?
« Reply #6 on: May 23, 2010, 02:02:35 AM »
Sounds like a fucked ECU.

Hope you have been able to break the motor in by now.  If you haven't, doesn't look good.  :(
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: Solid CEL = dead ECU?
« Reply #7 on: May 23, 2010, 10:19:04 AM »
Quote from: Joseph Davis on May 23, 2010, 02:02:35 AM
Sounds like a fucked ECU.

Hope you have been able to break the motor in by now.  If you haven't, doesn't look good.  :(

I've put 2500+ miles of abuse on it so far so should be broken in.

Getting annoyed by all this bullshit :P
Logged
Pages: [1]   Go Up
« previous next »