:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: junk yard exhaust  (Read 2396 times)

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
junk yard exhaust
« on: October 28, 2009, 08:09:28 AM »

found this dodge ram cummins diesel exhaust resonator for $25.. I figure it muffles the 6.7L turbo diesel, so it should work ok on a little honda motor. usually I've just ran open downpipe, but since I went 3", the sound is unbearable.

it's 3" in 4" out



do you guys think it will work alright?  I had a guy who gives pretty good advice say it's not worth the work because the cummins diesel most likely beat the shit out of it, and it will be clogged full of soot.
Logged

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: junk yard exhaust
« Reply #1 on: October 28, 2009, 08:22:42 AM »

my anti-lag in crome pro scares people.. i'm sure that would work  :noel:
Logged

salesmonkey

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2471
Re: junk yard exhaust
« Reply #2 on: October 28, 2009, 09:35:25 AM »

i was kinda wondering the same thing sense i would see these all the time at the scrap yard. not really the clogged thing but just how it would turn out.
Logged
rhmt for life

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: junk yard exhaust
« Reply #3 on: October 28, 2009, 09:47:18 AM »

i'm going to try it and update this thread with results
Logged

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: junk yard exhaust
« Reply #4 on: October 28, 2009, 10:42:13 AM »

concrete drill bits uber long do the trick when hollowing out cats.  i've never played with one of those resonators but you could do the same
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: junk yard exhaust
« Reply #5 on: October 28, 2009, 10:57:22 AM »

concrete drill bits uber long do the trick when hollowing out cats.  i've never played with one of those resonators but you could do the same

resonators are usually a straight through design with a baffle.. no modification needed
Logged

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: junk yard exhaust
« Reply #6 on: October 28, 2009, 11:09:55 AM »

concrete drill bits uber long do the trick when hollowing out cats.  i've never played with one of those resonators but you could do the same

resonators are usually a straight through design with a baffle.. no modification needed

what i was thinking.....    i don't see how could they get clogged?
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: junk yard exhaust
« Reply #7 on: October 28, 2009, 02:54:11 PM »

Most newer trucks have a device I forgort the name of. Unless the guy removed it or it failed, it shouldn't be clogged. It collects all soot from the exhaust just after the header(s), then the ecu basicly heats the EGT's enough to burn all soot out everywhere. You can literally ignite leaves with the heat if you remove the stock vented exhaust tip.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

keelay

  • Cheddar Bob
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2333
  • Function>Form
Re: junk yard exhaust
« Reply #8 on: October 28, 2009, 04:16:25 PM »

Most newer trucks have a device I forgort the name of. Unless the guy removed it or it failed, it shouldn't be clogged. It collects all soot from the exhaust just after the header(s), then the ecu basicly heats the EGT's enough to burn all soot out everywhere. You can literally ignite leaves with the heat if you remove the stock vented exhaust tip.

Are you talking about the "afterburner"? It's there to clean out the cat, and kicks on every so often. It's just a flamethrower type setup in the exhaust. Fucking emmissions...forcing people to over engineer too much shit really
Logged
The 2 fat bitches from the internet fucked me. Except for one, she didn'#039#039t.

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: junk yard exhaust
« Reply #9 on: October 28, 2009, 05:33:58 PM »

the particulate filter thats now required on all diesels?  dont' know much about how they work tho
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

chris

  • Guest
Re: junk yard exhaust
« Reply #10 on: October 28, 2009, 05:59:25 PM »

if you want to clean it out buy couple cans of carb cleaner and hit up the local car wash


less than 5 bucks and it should be damn near spotless afterwards



Logged

toyolla86

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 289
Re: junk yard exhaust
« Reply #11 on: October 28, 2009, 07:45:32 PM »

you should fill it with gasoline to get the biggest and best backfire ever
Logged
twin50 son. get some

and stop acting like a muslim

salesmonkey

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2471
Re: junk yard exhaust
« Reply #12 on: October 29, 2009, 07:42:23 AM »

you should fill it with gasoline to get the biggest and best backfire ever

haha that sounds fun pictures and videos as well. get a gallon size zip lock bag and fill it full of gas and toss her in there. once it ignites let the fun begin haha.
Logged
rhmt for life
Pages: [1]   Go Up