Topic: best bang for the buck tuning (Read 15327 times)

98vtec · « **Reply #30 on:** January 22, 2010, 01:52:38 AM »

we shall see. I honestly do not know. Once my car is up and running, i think i may keep the V1 ostrich in the prelude and buy a demon for the tuning ecu. neptune just got live logging uploaded with the demon hardware so i bet calvin isnt too far back. He said he had some issues that were higher priority so i know he is working on that and the anti-theft.

d112crzy · « **Reply #31 on:** January 22, 2010, 02:41:58 AM »

Sounds like he's trying to catch up to neptune.

98vtec · « **Reply #32 on:** January 22, 2010, 12:31:54 PM »

Quote from: d112crzy on January 22, 2010, 02:41:58 AM

Sounds like he's trying to catch up to neptune.

or getting ahead. Doesn't matter to me either way, i like both programs

dvst8r · « **Reply #33 on:** January 22, 2010, 12:45:43 PM »

Quote from: dvst8r on January 21, 2010, 11:39:41 PM

Where is the vice grips option?

bigdaddyvtec · « **Reply #34 on:** January 22, 2010, 01:20:54 PM »

Quote from: dvst8r on January 22, 2010, 12:45:43 PM

Quote from: dvst8r on January 21, 2010, 11:39:41 PM
Where is the vice grips option?

Fucking Prarie negroid Canadians stole them to BBQ with.. You know... REPARATIONS

Later they were used to Hold the Dizzy steady on the biggest mis mash of FI shit Ive ever seen in my life... LOL.... It made the front page... ANYONE, ANYONE?

ryan89crx · « **Reply #35 on:** January 22, 2010, 01:25:18 PM »

Quote from: bigdaddyvtec on January 22, 2010, 01:20:54 PM

Later they were used to Hold the Dizzy steady on the biggest mis mash of FI shit Ive ever seen in my life... LOL.... It made the front page... ANYONE, ANYONE?

Homemadesupercharger.org.edu.com.gov

92CXyD · « **Reply #36 on:** January 22, 2010, 01:50:47 PM »

Quote from: ryan89crx on January 22, 2010, 01:25:18 PM

Quote from: bigdaddyvtec on January 22, 2010, 01:20:54 PM
Later they were used to Hold the Dizzy steady on the biggest mis mash of FI shit Ive ever seen in my life... LOL.... It made the front page... ANYONE, ANYONE?
Homemadesupercharger.org.edu.com.gov

Yeah I got all that fixed it would of ran if I had put oem map sensor back on.

If you think I had a lot of shit mashed in there wait until the next Dyno Day.

I'll show up with a holset blowing into the supercharger into a larger intercooler through 3" piping to a 70mm tb matched to a z6 mani.
All on a z6/y8 vitara w/ eagle rods build. ;D

And with a lot more electronics packed in the engine bay and cockpit. ;D

bigdaddyvtec · « **Reply #37 on:** January 22, 2010, 01:57:16 PM »

I know you will son!!!

That car was fucking awesome... The first guy down there.. LOL... SOunded insane when it ran for like 30 seconds.. LOL

SPEAKING OF WHICH we need to have another dyno day in the PNW... Say March?

92CXyD · « **Reply #38 on:** January 22, 2010, 01:59:21 PM »

thanks Spiker

I just need to get off my ass and put engine back together. ;D

I should start a want thread so I can finish it up.

ratcityrex · « **Reply #39 on:** January 22, 2010, 02:19:59 PM »

Quote from: bigdaddyvtec on January 22, 2010, 01:57:16 PM

SPEAKING OF WHICH we need to have another dyno day in the PNW... Say March?

FUckenn ehh (Canadian lingo)

92CXyD · « **Reply #40 on:** January 22, 2010, 02:22:01 PM »

Quote from: ratcityrex on January 22, 2010, 02:19:59 PM

Quote from: bigdaddyvtec on January 22, 2010, 01:57:16 PM
SPEAKING OF WHICH we need to have another dyno day in the PNW... Say March?

FUckenn ehh (Canadian lingo)

May would better for me. ;D

bigdaddyvtec · « **Reply #41 on:** January 22, 2010, 02:35:54 PM »

Id like to try andd get it in when its a bit cooler....

d112crzy · « **Reply #42 on:** January 22, 2010, 10:02:24 PM »

haha, don't want to get sun burned this time?

ratcityrex · « **Reply #43 on:** January 22, 2010, 10:36:59 PM »

It was pretty fucking hot last year for may that is. We had a great turn out, hope this years meet is even better.

98vtec · « **Reply #44 on:** January 22, 2010, 10:59:39 PM »

fuck you guys, i want to BBQ $:-\$

ratcityrex · « **Reply #45 on:** January 22, 2010, 11:14:13 PM »

Quote from: 98vtec on January 22, 2010, 10:59:39 PM

fuck you guys, i want to BBQ $:-\$

Fly up here for the meet, and kick it with the crew that can actualy put a meet together and have more than 3 people show up.

98vtec · « **Reply #46 on:** January 22, 2010, 11:19:06 PM »

WA is one hell of a two way flight price

d112crzy · « **Reply #47 on:** January 23, 2010, 01:38:54 AM »

Not really, unless you consider over $400-500 for a 2way expensive. That's about right for these times.

ratcityrex · « **Reply #48 on:** January 23, 2010, 02:24:26 AM »

Dude if you watch the prices you can pick up dealz from 200-250 to seatac. Its 284 to fly from pensacola fl. to setac right now.

CSaddict · « **Reply #49 on:** January 23, 2010, 09:47:57 AM »

Where is the Motec option?

98vtec · « **Reply #50 on:** January 23, 2010, 10:56:39 AM »

Quote from: ratcityrex on January 23, 2010, 02:24:26 AM

Dude if you watch the prices you can pick up dealz from 200-250 to seatac. Its 284 to fly from pensacola fl. to setac right now.

both ways for 284?

ratcityrex · « **Reply #51 on:** January 23, 2010, 11:29:05 AM »

Quote from: 98vtec on January 23, 2010, 10:56:39 AM

Quote from: ratcityrex on January 23, 2010, 02:24:26 AM
Dude if you watch the prices you can pick up dealz from 200-250 to seatac. Its 284 to fly from pensacola fl. to setac right now.

both ways for 284?

Yep, check priceline.com foo.....

88dx · « **Reply #52 on:** January 23, 2010, 12:05:16 PM »

Quote from: ratcityrex on January 23, 2010, 02:24:26 AM

Dude if you watch the prices you can pick up dealz from 200-250 to seatac. Its 284 to fly from pensacola fl. to setac right now.

Fuck thats spendy, U can fly to vegas for $200 for 5 days with Hotel

I hope my hotel room is supplied with hookers :yes:

Foowee · « **Reply #53 on:** January 24, 2010, 02:54:47 PM »

I voted d on nog cause it's the closest to te I could find.

I've been on the fence about spending money w/Calvin. The license stuff has kept my money in my pocket. Finding solid answers has been a significant challenge. Keep in mind I've had personal tutorials from a couple of pgmfi's finest... However my knowledgeabilties of electronics n software is very limited.

If I make the jump to obd1 I'll probably end up using crome...

d112crzy · « **Reply #54 on:** January 24, 2010, 03:02:04 PM »

Quote from: Foowee on January 24, 2010, 02:54:47 PM

I've been on the fence about spending money w/Calvin. The license stuff has kept my money in my pocket.

Same here. For me its between Neptune and eCtune. I really don't EVER want to deal with the bullshit mandatory updates, much less if there was ever anything that could be wrong with the updates. I could give a shit less how fast he fixes it, it shouldn't happen in the first place. Even if it only took a few hours to fix, that a lot of lost time when tuning a car. Time= money.

The only thing I wish Neptune offered is individual cylinder trim for ignition. It might not be a significant issue with boosted setups, but it makes quite a difference on NA setups. So I've heard from Blake anyways.

ryan89crx · « **Reply #55 on:** January 24, 2010, 07:08:36 PM »

I have a copy of Ectune, and really I don't use it often enough for the force updates to bother me. I just make sure if I'm going to be tuning, I run force update before I leave the house.

PhilStubbs · « **Reply #56 on:** January 27, 2010, 10:09:01 PM »

so, after a couple recent tunes i have a couple comments.

i tuned with a hondata s300 yesterday and was kind of annoyed. its not very straight forward. seems to work well once you get used to where everything is, but i like the keyboard commands with crome a lot better. also, the car was over heating just cruising at 65-70 mph. needles to say, we didnt get much tuning done. i have tuned with s300's before, but i always came in to fix the owners horrible attempt at tuning themselves so i have never set it up from scratch. there was a lot of time wasted in just figuring it out.

saturday i tuned a teg with a gsr block, ported b16 head, stage 1 type ARRGGGGHHH N/A cams, topmount and a t70 to 25psi. damn thing rips. he had drag radials and 4th gear was struggling for traction. we tuned in 5th and im not excited to say it was a street tune. i would much rather be the driver at speeds like that. last time i tuned it was around 20psi and it made 385whp. this time it pulled harder in 5th than it did in 4th during the last tune. we estimate 450whp or so, but have no idea. he plans to get it on the dyno soon at least to see what it puts down, but possibly for me to tune it more. we will see.

im not sure if that info is worth anything to anyone, but it was some recent experience with some big numbers on crome, figured i would share

News:

Poll

best tuning software for the money

Author Topic: best bang for the buck tuning (Read 15327 times)