Topic: My $500 Budget build (D15B) New Pics 4/9 (Read 11436 times)

skaterdudz02 · « **on:** February 02, 2010, 10:49:21 PM »

Okay, so I don't post much. (You all prolly don't give a fuck) I just read and absorb, but tonight I felt the itch to just post a little turbo setup I've been toying with.

For years I've always wanted a Civic hatch, besides the Accord, of course. Well, six months ago I picked up two. Both running, one in good shape and one a convertible. (long story)

So since purchasing, I've decided I'd scrounge up what I had lying around the shop and build myself a turbo kit for the car. I figured 6 PSI on a stock build would be sufficient.

Parts list:
Volvo T3 .42/.48 - Free
Oil lines - Free
Manifold - 65
WG - 50
Interfool + piping + clamps - 180
Exhaust - 85 (this is what pushed me up a little further on the budget)
Boost Gauge - 55
Sandwich plate - 25
Chip kit + restrictor - 34
Return & misc shit - free
WB - have one

Total - $494 -

That's so far, I don't think I'll need much more for this to succeed. And yes, I'll be using stock injectors for the moment. If I feel it's not enough, I'll upgrade.

Onto the pictas.

When I first bought the two cars.

The sad shape convertible. It looked like it was molested every day. Pics don't do justice.

So, after I bought them, found out the hatch with a top had an underlying smoking issue, so I decided to swap motors and clean things up a bit. Turns out, that convertible had something packing it's weight.

The old fucked up D15b7 (R.I.P) 250k

And the mighty D15B!

Of course it was painted and cleaned. The oil was soooo caked on there, that no one could ever tell it was a D15b.

------

As she sits in the bay. (Car is being painted too)

Misc turbo parts. Intercooler and piping is installed. Pics will be up tomorrow.

The convertible in the dead zone. It was fun while it lasted. Let me say driving it was fun as shit. :yes:

And as it sits now. With the appropriate gangsta lean. Shock will no longer go back in due to a bent frame.

MORE PICS TO COME!!

Oh, and if you all think I don't know how to boost or have never done it before, here's what I drive. Still running even after 30k of hard beaten slut miles and it's "idle bugs".

2/5 Update. Here's a few more of the car and turbo/exhaust manifold.

Let the mouth watering/flaming/talk begin.

speedjunky01 · « **Reply #1 on:** February 02, 2010, 11:02:05 PM »

all was going well until no boobies

WTF

this is rHMT

nice project though best of luck

Teg2boo · « **Reply #2 on:** February 02, 2010, 11:03:25 PM »

This thread change from the regular reposted shit!

Good work! Any ripper vids?

skaterdudz02 · « **Reply #3 on:** February 02, 2010, 11:05:55 PM »

No rippers for either cars. Sadly enough. Hopefully I'll be able to pull plenty off with the hatch with it being light and all. Does anyone know how much these things "truly" weigh?

malichite · « **Reply #4 on:** February 02, 2010, 11:31:09 PM »

Quote from: skaterdudz02 on February 02, 2010, 10:49:21 PM

I figured 6 PSI on a stock build would be sufficient.

BTW, no boobies here.

This post stinks like fail.

skaterdudz02 · « **Reply #5 on:** February 02, 2010, 11:39:42 PM »

Better nogs?

crxvtec91 · « **Reply #6 on:** February 02, 2010, 11:44:04 PM »

Quote from: malichite on February 02, 2010, 11:31:09 PM

Quote from: skaterdudz02 on February 02, 2010, 10:49:21 PM
I figured 6 PSI on a stock build would be sufficient.

BTW, no boobies here.

I here something coming

Op stop being a Jew

This post stinks like fail.

malichite · « **Reply #7 on:** February 02, 2010, 11:46:16 PM »

Quote from: skaterdudz02 on February 02, 2010, 10:49:21 PM

still fail.

boosted 00 black si · « **Reply #8 on:** February 04, 2010, 11:44:52 PM »

hummmm

Ravage70 · « **Reply #9 on:** February 06, 2010, 11:21:35 AM »

So you put a non vtec sohc head on a vtec block?

HiProfile · « **Reply #10 on:** February 06, 2010, 12:55:58 PM »

Measure the lobe lift and determine wtf that head is from. Non-vtec D15B's exist, but are uncommon because they sucked. Should be okay with a turbo though, and I guess you can't beat the price.

Get some 4th gear rippers ASAP, don't bother with tuning just yet.

Teg2boo · « **Reply #11 on:** February 06, 2010, 01:01:15 PM »

Quote from: HiProfile on February 06, 2010, 12:55:58 PM

Get some 4th gear rippers ASAP, don't bother with tuning just yet.

Recipe for a success story!

CSaddict · « **Reply #12 on:** February 06, 2010, 01:48:58 PM »

I could have sworn you were banned with a similar name a while ago?

skaterdudz02 · « **Reply #13 on:** February 06, 2010, 06:20:08 PM »

I've never been banned from the boards, both rhmt and hmt. You must be thinking of someone else.

As for the head wise, it did confuse me at first why there's a non vtec head on there. There is an area for a vtec solenoid to be added but I not sure about the rocker's if it has anything for the intake side. I'll have to look the next time I pull the cover.

All I know of the history of the car is it came from Canada and was an automatic. Had an auto P06 ECU in it too. Anyone else have input on this?

ApexSilver06MR · « **Reply #14 on:** February 06, 2010, 06:34:53 PM »

Quote from: skaterdudz02 on February 06, 2010, 06:20:08 PM

I've never been banned from the boards, both rhmt and hmt. You must be thinking of someone else.

As for the head wise, it did confuse me at first why there's a non vtec head on there. There is an area for a vtec solenoid to be added but I not sure about the rocker's if it has anything for the intake side. I'll have to look the next time I pull the cover.

All I know of the history of the car is it came from Canada and was an automatic. Had an auto P06 ECU in it too. Anyone else have input on this?

thats not for da mad tyte vtak soleniodz yo. thats for a carb'd jdm vehicle. jdm d15b's both came vtak and non vtak. thats for a mad tyte fuel pump.

skaterdudz02 · « **Reply #15 on:** February 06, 2010, 06:39:20 PM »

Well, there you go, it makes sense now. I'm surprised that's what it was used for because it's in the same location where a vtak solenoid would be.

glustic · « **Reply #16 on:** February 06, 2010, 07:06:36 PM »

This thread is full of fail....

chris · « **Reply #17 on:** February 06, 2010, 07:34:13 PM »

Quote from: skaterdudz02 on February 06, 2010, 06:39:20 PM

Well, there you go, it makes sense now. I'm surprised that's what it was used for because it's in the same location where a vtak solenoid would be.

Not really that odd if you know anything about old school fuel shit yo

BoostedSchemes · « **Reply #18 on:** February 06, 2010, 09:08:25 PM »

cool project, nice looking cars

HiProfile · « **Reply #19 on:** February 07, 2010, 04:25:42 AM »

Quote from: skaterdudz02 on February 06, 2010, 06:20:08 PM

All I know of the history of the car is it came from Canada and was an automatic. Had an auto P06 ECU in it too. Anyone else have input on this?

The original d15b was the sohc ZC's little sister, rated ~103hp with fuel injection and less in carb'd cases. FYI a 92 dx's d15b7 is rated ~112hp, d16a6 ~108hp, sohc zc from 113-118hp.

Ravage70 · « **Reply #20 on:** February 09, 2010, 07:59:00 PM »

d15b7 is no 112hp, closer to 100, much closer

turbob16hatch · « **Reply #21 on:** February 10, 2010, 01:49:20 AM »

Quote from: Ravage70 on February 09, 2010, 07:59:00 PM

d15b7 is no 112hp, closer to 100, much closer

Pretty sure he is talking in factory rated output, and that sounds about right.

ratcityrex · « **Reply #22 on:** February 10, 2010, 02:04:37 AM »

At any rate the bay looks good.

Corey · « **Reply #23 on:** February 10, 2010, 04:06:02 AM »

Quote from: Ravage70 on February 09, 2010, 07:59:00 PM

d15b7 is no 112hp, closer to 100, much closer

its 102, actually.

skaterdudz02 · « **Reply #24 on:** April 09, 2010, 09:18:47 PM »

Okay, so the car has been running now since mid February, I've just been a busy and lazy snob and haven't had the time to post up any progress.

That's pretty much all for now. Turbo doesn't leak. Smokes every once in a hard blown mood. Tuned on crome for only 6 psi at the moment. It pulls nice for just keeping things stock. It's my daily till I build up the Accord that's chillen at the moment.

crxvtec91 · « **Reply #25 on:** April 09, 2010, 10:23:48 PM »

Nice not bad. Did you buy bigger injectors?

skaterdudz02 · « **Reply #26 on:** April 09, 2010, 10:52:19 PM »

Thanks. That was one thing I was contemplating on. I know bigger injectors will do better but to be honest, I'm not looking for high end numbers here. If the stock 240s run 5 or 6 lbs efficiently, then I'll be alright with that. I'd rather dump more money into the Accord and make that a 300 f series bomb.

malichite · « **Reply #27 on:** April 09, 2010, 11:01:04 PM »

Looks really good. Hurry up and get some rippers already. :yes:

skaterdudz02 · « **Reply #28 on:** April 09, 2010, 11:03:13 PM »

Quote from: malichite on April 09, 2010, 11:01:04 PM

Looks really good. Hurry up and get some rippers already. :yes:

When I decide to get a camera rolling, I will. I never knew how quick these cars were. They're super light.

speedjunky01 · « **Reply #29 on:** April 10, 2010, 12:24:52 AM »

Looks like a nice ass build! Like the way you did the dp!!!

Now man up get some dsm 450 or Rdx injectors and put her to 10 psi for a real ride

News:

Author Topic: My $500 Budget build (D15B) New Pics 4/9 (Read 11436 times)

chris