:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Daspoop/Trevor YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: sohc cable gears in a hydro casing?  (Read 3292 times)

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
sohc cable gears in a hydro casing?
« on: February 05, 2010, 12:20:17 AM »

just wondering if you can do this? can get a dohc zc cable tranny for cheap but only have 93 and up civics just wondering if i can swap gears from the zc to a hydro case (Igot an extra one layin around). I have never done tranny work obviously
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: sohc cable gears in a hydro casing?
« Reply #1 on: February 05, 2010, 02:57:58 AM »

you can swap ZC 3-4 and crx .771 for 5th.

4th gear will need machined to clear the 3-4 hydro hub.
Logged
OG before the OG'#039#039s

theidealone

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 670
Re: sohc cable gears in a hydro casing?
« Reply #2 on: February 07, 2010, 02:09:55 PM »

What about using hydro forks in a cable tranny? Any possibility to this, so I could get some steal forks?
Logged

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: sohc cable gears in a hydro casing?
« Reply #3 on: February 07, 2010, 07:45:40 PM »

What about using hydro forks in a cable tranny? Any possibility to this, so I could get some steal forks?

the next question to follow this is; why do you want steel shift forks?
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

theidealone

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 670
Re: sohc cable gears in a hydro casing?
« Reply #4 on: February 08, 2010, 01:23:48 AM »

Because I hate pulling the tranny apart every year to replace the aluminum ones. :(
Logged

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: sohc cable gears in a hydro casing?
« Reply #5 on: February 08, 2010, 05:47:20 AM »

Because I hate pulling the tranny apart every year to replace the aluminum ones. :(

learn to drive?
Logged
OG before the OG'#039#039s

theidealone

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 670
Re: sohc cable gears in a hydro casing?
« Reply #6 on: February 08, 2010, 12:09:57 PM »

Yea, I guess that would help. But its been years, and I still havent accomplished that much. Dont think itll get much better...

So I guess my answer is no? I would just need to do a hydro conversion?

Thanks.
Logged
Pages: [1]   Go Up