Topic: leaking nipple on radiator atf cooler (Read 6118 times)

jay · « **on:** February 14, 2010, 05:54:27 PM »

both of the fucking nipples fucking spin in place and just leak atf out

so i looped the line back into the trans so it just recirculates the fluid bypassing the tranny fluid cooler

wtf do i do to make this bitch not leak

on my other rad they dont spin

marcj · « **Reply #1 on:** February 14, 2010, 06:00:51 PM »

my kid is 11 months old and my wife still has leaky nipples.. it's common.

turbohf · « **Reply #2 on:** February 14, 2010, 06:04:31 PM »

well if nothing is connected to it, all teh shit thats in there is gonna drip out. once it all drips out, it will stop dripping....

patsmx5 · « **Reply #3 on:** February 14, 2010, 06:14:12 PM »

drive it a while with the cooler bypassed and you won't be worried about that small leak for a while.

CSaddict · « **Reply #4 on:** February 14, 2010, 06:14:52 PM »

Buk just throw an aftermarket tranny cooler in it and call it a day.

snm95ls · « **Reply #5 on:** February 14, 2010, 06:18:21 PM »

Quote from: CSaddict on February 14, 2010, 06:14:52 PM

Buk just throw an aftermarket tranny cooler in it and call it a day.

Ntrain2k · « **Reply #6 on:** February 14, 2010, 06:21:28 PM »

Leaky nipples........lol

jay · « **Reply #7 on:** February 14, 2010, 06:24:09 PM »

Quote from: turbohf on February 14, 2010, 06:04:31 PM

well if nothing is connected to it, all teh shit thats in there is gonna drip out. once it all drips out, it will stop dripping....

lol i had the lines connected and they were leaking thats why i disconnected it..

the nipple just spins

jay · « **Reply #8 on:** February 14, 2010, 06:24:51 PM »

shit sucks ill just leave it bypassed till i can afford a atf cooler im not even driving the car anyways i just need to limp the bitch home

BoostedSchemes · « **Reply #9 on:** February 14, 2010, 06:51:58 PM »

ever heard of jbweld

jay · « **Reply #10 on:** February 14, 2010, 07:10:14 PM »

Quote from: BoostedSchemes on February 14, 2010, 06:51:58 PM

ever heard of jbweld

good call but i dont think it will hold up

glustic · « **Reply #11 on:** February 14, 2010, 07:11:42 PM »

Quote from: jay on February 14, 2010, 07:10:14 PM

Quote from: BoostedSchemes on February 14, 2010, 06:51:58 PM
ever heard of jbweld

good call but i dont think it will hold up

jb weld fixes everything

Joseph Davis · « **Reply #12 on:** February 14, 2010, 07:18:53 PM »

Quote from: glustic on February 14, 2010, 07:11:42 PM

Quote from: jay on February 14, 2010, 07:10:14 PM
Quote from: BoostedSchemes on February 14, 2010, 06:51:58 PM
ever heard of jbweld

good call but i dont think it will hold up

jb weld fixes everything

Plus five internets to those that believe in JB Weld.

BoostedSchemes · « **Reply #13 on:** February 14, 2010, 07:49:07 PM »

if it holds radiators it will hold a shitty stock atf cooler, just clean it

Adam Lofton · « **Reply #14 on:** February 14, 2010, 08:54:20 PM »

Buk, I'll ship you a cooler if you want to pick up the tab on shipping.

SgtB · « **Reply #15 on:** February 14, 2010, 10:52:21 PM »

I fixed a cracked transmission case with jb with fluid still in it. Clean it. Advanced has generic coolers on the shelf.

t_cel_t · « **Reply #16 on:** February 14, 2010, 10:56:46 PM »

Quote from: SgtB on February 14, 2010, 10:52:21 PM

I fixed a cracked transmission case with jb with fluid still in it. Clean it. Advanced has generic coolers on the shelf.

fuck that, go raid the nigger neighbors air-conditioner unit and steal one of the little heat exchangers

SgtB · « **Reply #17 on:** February 14, 2010, 11:13:55 PM »

LS1pwNzJ00 · « **Reply #18 on:** February 15, 2010, 01:26:58 AM »

JB weld can do anything, I once built intercooler end tanks out of jb weld and scrap pieces of plastic, i also once made a 2.5in to 2 in coupler reducer out of jb weld.

t_cel_t · « **Reply #19 on:** February 15, 2010, 01:37:02 AM »

jb weld held jesus to the cross

keelay · « **Reply #20 on:** February 15, 2010, 02:12:10 AM »

cut the nipple off, run some hose from the line to the cooler. voila.

+1 for JB weld though, can't go wrong

Doug · « **Reply #21 on:** February 15, 2010, 06:11:58 AM »

Swap out tranny for a manual, problem solved.

News:

Author Topic: leaking nipple on radiator atf cooler (Read 6118 times)

Adam Lofton