:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$  (Read 5608 times)

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575



Didn't think to take a picture but am about to place another order for shit I need.

Anyway it's on the transmission side of the block (B18A) near a coolant hose port that goes out the side of the block at a 90* angle.  Has two holes diagonal from each other near the port and being that they are "open" on the other side and proximity to the coolant pipe, I'm assuming they will spew hot fluids into my eyes causing injury to myself if I do not put whatever should go there in there.

If nobody knows I'll just put some bolts in, but I know one of you fuckers knows...

UPDATE:

here's what I'm talking about:

The two near the hose port.

Also, WTF IS WRONG WITH THIS BRACKET:


Is that the correct one for the b-series in a CRX?  The holes line up and bracket looks like it will work...however the bolts that fit into the transmission are bigger than the holes on the bracket.
« Last Edit: March 03, 2010, 09:10:11 PM by Jorsher »
Logged

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662
Re: What goes in these holes NSFW
« Reply #1 on: February 25, 2010, 12:52:50 AM »

On the head I ASSume.

Towards the front of the car or the rear of the car?

Which head are you using?

The only thing that comes to mind from your description and your shitty ass pic is the coolant inlet that should bolt to the side of the head where the upper radiator hose attaches.

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662
Re: What goes in these holes NSFW
« Reply #2 on: February 25, 2010, 12:56:53 AM »

Or this pic?

stealthiskey

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 441
Re: What goes in these holes NSFW
« Reply #3 on: February 25, 2010, 01:06:06 AM »

dicks, obviously

8===D
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: What goes in these holes NSFW
« Reply #4 on: February 25, 2010, 02:32:20 AM »

I will get real mufuckin legit pics tomorrow.

Fuck mspaint
Logged

jagojon3

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: What goes in these holes NSFW
« Reply #5 on: February 25, 2010, 03:15:43 AM »

She got a fat pussy
Logged

Turkey soup pancakes sir

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #6 on: February 25, 2010, 07:45:08 PM »

HAAAALLPPPP
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #7 on: February 25, 2010, 07:52:33 PM »

One of them is for the coolent temp for your gauge,(the one on the left, its 1 wire) and one is coolent tep for your ecu.(its the one on the right and its 2 wires)
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

chris

  • Guest
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #8 on: February 25, 2010, 07:54:41 PM »

One of them is for the coolent temp for your gauge,(the one on the left, its 1 wire) and one is coolent tep for your ecu.(its the one on the right and its 2 wires)



word jack them for your sohc motor :)
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #9 on: February 25, 2010, 07:55:12 PM »

One of them is for the coolent temp for your gauge,(the one on the left, its 1 wire) and one is coolent tep for your ecu.(its the one on the right and its 2 wires)



word jack them for your sohc motor :)

Will do, thanks, now....wtf is up with that trans bracket?
Logged

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #10 on: February 25, 2010, 07:56:39 PM »

The temperature sender for the gauge cluster goes in the lower hole.  The coolant temperature sensor for the ECU goes in the upper hole.  You can rob both of those form a D series.

Are you sure the holes on the bracket line up with the hole sin the engine and transmission?   The two that go inot the transmission look like they are too far apart.  Maybe from an auto?



Nog, this has got to be the slowest B swap into 88-91 civic ever.

 ;D

I may have a few of the pieces that you need.  

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #11 on: February 25, 2010, 08:00:16 PM »

The temperature sender for the gauge cluster goes in the lower hole.  The coolant temperature sensor for the ECU goes in the upper hole.  You can rob both of those form a D series.

Are you sure the holes on the bracket line up with the hole sin the engine and transmission?   The two that go inot the transmission look like they are too far apart.  Maybe from an auto?



Nog, this has got to be the slowest B swap into 88-91 civic ever.

 ;D

I may have a few of the pieces that you need.  



Haha, I think it is...but was hoping to get this shit done within the next week...isn't looking that way now.

The bolt holes line up perfectly, but they're for sure slightly too small.  The holes that are too small are the two that go into the b trans....  The part at the top that's has the bolt going through the bracket and block seems to be fine.
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #12 on: February 25, 2010, 09:18:24 PM »



Shitty pic, but yeah it all lines up.

The bolts that fit through the bracket also fit right through the threaded holes in the transmission :P

The bolts that thread into the transmission do not fit through the bracket holes.

I know someone with a drill press, may just drill it out, but would rather have the proper part.
Logged

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #13 on: February 25, 2010, 09:29:33 PM »

Weird.

19 mm heads on the bolts that go into the transmission?

Dunno man.  It has been way too long since I have had to deal with the swap in my CRX.  The bracket appears to be the right one though.

It kind of sucks that those things don't have a stamp on them or anything like that.

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #14 on: February 25, 2010, 09:34:25 PM »

I think they're actually 17mm bolts, not 100% sure, but anyway the bolt threads into the trans perfectly, but won't fit through the bracket.  I guess I'll just take it to the drill press this weekend and try to drill it wider.  It's only a couple mm too small...I'd rather pay for the proper bracket if someone has one though.  Not sure WTF is up with this one.

On an unrelated note, how can I tell what my reman dizzy came from?  The cap I bought from vatozone won't fit either.  The bolt holes are all a couple mm too far "inside" which may just be a shitty cap but I've bought the cheap caps before and never had a fitment issue.
Logged

chris

  • Guest
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #15 on: February 25, 2010, 10:28:21 PM »

Thats a cable rear bracket hence why the bolts are smaller than a hydro rear bracket. I wanna saw that when I did a hydro install in a crx we used the cable bracket and did just what your planning and opened the holes to fit the larger bolt thread of the hydro transmission
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: What goes in these holes, WTF IS WRONG WITH THIS BRACKET - NSFW, MAKE $$$
« Reply #16 on: February 25, 2010, 10:33:49 PM »

Thats a cable rear bracket hence why the bolts are smaller than a hydro rear bracket. I wanna saw that when I did a hydro install in a crx we used the cable bracket and did just what your planning and opened the holes to fit the larger bolt thread of the hydro transmission

Makes sense, I was given that bracket with cable mounts...

Guess I'll drill that hoe out this weekend.

So now just need cam bolts, and all will be well.
Logged

CSaddict

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484

I thought the Hydro Vs Cable mount had an offset difference as well?
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662

I thought the Hydro Vs Cable mount had an offset difference as well?

It probably does.  I forgot that he was using a hydro trans.

No idea on that clusterfuck then.

 :-\

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575

I thought the Hydro Vs Cable mount had an offset difference as well?

Oh, forgot to update.



Used that classic piece of real, made in USA machinery, a clamp, and a couple piece of scrap wood to make it sit evenly and centered to the drill bit.

A few minutes later, had it done.

Bolted up perfectly fine, holes are not offset.
Logged
Pages: [1]   Go Up