Topic: finished pics!!! --90Turbotegs 1g dx crx, dohc d16a1 vitara build (Read 50006 times)

HiProfile · « **Reply #30 on:** March 26, 2010, 12:23:26 PM »

I don't see why you guys hate so much. I heard some import mag was gonna feature someone's plain-jane POS just because of the blue dash:

ANyways I can't wait to see your 86 do some rippers.

90turboteg · « **Reply #31 on:** March 28, 2010, 02:57:53 AM »

ya same here, should be fun.

in other news, i had a pos eagle talon tsi i got from an auction and some parts from an old dsm that i parted out, well i traded it not running and got it for only 200, for a 86 civic hatch si with a 89 dohc d16a1 that ran and drove, just had to ungetto some of the wireing tonight, and fix a few small things. once i get the old exhaust and header from my crx on it, and put my old 6 puck in it, while buttoning it up to make it a good dd i will start driving it. now i have 2 oldschool oczc rides, and its pretty clean.

got the motor 100% done this weekend everythings bolted up, the guy thats building my trans pretty much said its not top priority and that he has no idea when he can get to it, so i think me and my friend eric are just going to fix the 5th gear shit ourselfs, the transmissions are fairly easy to work on and i have an extra that came with the hatch i just got

bigdaddyvtec · « **Reply #32 on:** March 28, 2010, 03:09:02 AM »

Quote from: HiProfile on March 26, 2010, 12:23:26 PM

I don't see why you guys hate so much. I heard some import mag was gonna feature someone's plain-jane POS just because of the blue dash:

Well played...
heh...

I LoleD

Foowee · « **Reply #33 on:** March 28, 2010, 09:58:52 AM »

I say mini-ram... People run 10's with them on a regular basis. They aren't a nightmare to wrench or fab around. Space is a hot commodity, especially since you have a 1g. As for the run of the mill part...

HiProfile · « **Reply #34 on:** March 28, 2010, 12:54:58 PM »

Quote from: Foowee on March 28, 2010, 09:58:52 AM

ESPECIALLY with a Honda....

theidealone · « **Reply #35 on:** March 28, 2010, 01:27:48 PM »

x3. Nothing about a Honda will be "unique", and mini rams are simple, clean, and get shit done.

Mini rams on DOHC D series FTW!

90turboteg · « **Reply #36 on:** March 28, 2010, 02:07:06 PM »

ya im just not a big fan of how low the turbo sits with a miniram, theres hardly room for a oil drain. anyone have pics of there oil drain setup on a d with a miniram?

Foowee · « **Reply #37 on:** March 28, 2010, 02:49:41 PM »

You can clock your center section up to 30 degrees to point the drain at the oil pan. I don't have any pics for ya.

Also if you've taken apart your turbo you can clock the oil seals with the gaps pointing upward...

90turboteg · « **Reply #38 on:** March 28, 2010, 09:13:40 PM »

ya but now that my crx wont be driven all the time, and its my racecar, i can do some crazy setup, id like to make a setup i want, and i want to make a forward facing setup. ya i was planing on facing the turbo twards the pan a little if i make a miniram.

90turboteg · « **Reply #39 on:** April 04, 2010, 11:12:28 PM »

well with the way my fmic fits, im going to just run the miniram i made for now with my garret turbo. moved the car to my new shop, as soon as my trans is done i can put the swap in and start mocking everything up. cant wait to get it going, just need some misc turbo crap and it should hit the road by june. ill post up pics as soon as it goes in and i get the fmic and shit all mounted

90turboteg · « **Reply #40 on:** May 16, 2010, 11:23:19 PM »

finaly got my transmission together after getting wrong part after wrong part, fucking gay. plan on geting the motor in this week, and start mocking my turbo shit up, geting the wireing and bs done. finaly a little update. fml pics up soon

bigdaddyvtec · « **Reply #41 on:** May 17, 2010, 02:45:09 AM »

Need an EBC???

ratcityrex · « **Reply #42 on:** May 17, 2010, 02:33:18 PM »

where the fuck were you at on the dynoday?

90turboteg · « **Reply #43 on:** May 18, 2010, 07:18:00 PM »

sorry i was building my transmission, and getting my shop all done so i can work on shit, had to wire/plumb my compressor, and move a bunch of shit.
and yes i do want a ebc nogalog

bigdaddyvtec · « **Reply #44 on:** May 18, 2010, 07:21:04 PM »

Quote from: 90turboteg on May 18, 2010, 07:18:00 PM

sorry i was building my transmission, and getting my shop all done so i can work on shit, had to wire/plumb my compressor, and move a bunch of shit.
and yes i do want a ebc nogalog

call daddy. Id like to get rid of it tomorrow evening.....

90turboteg · « **Reply #45 on:** May 18, 2010, 07:24:49 PM »

well for one i dont have your number, and 2 i dont have the cash as of now, by the weekend i will. sorry

bigdaddyvtec · « **Reply #46 on:** May 18, 2010, 07:35:26 PM »

Quote from: 90turboteg on May 18, 2010, 07:24:49 PM

well for one i dont have your number, and 2 i dont have the cash as of now, by the weekend i will. sorry

You have pm. my number included. Tell me you can paypal me this weekend and its yours.

90turboteg · « **Reply #47 on:** May 18, 2010, 07:45:43 PM »

you talkin dirty to me

, lol as long as the homo sends the money for my rods/pistons ill be able to, maybe even sooner, just sent him a ton of pics. id buy your injectors too, but they are a little big for my setup and im going with some injector clinic ones

90turboteg · « **Reply #48 on:** May 24, 2010, 01:31:20 AM »

sorry bdvt, that guy is asking a ton of questions about these rods and pistons i have, he said tuesday i will get a payment i guess. so if you still have the boost controller then i will get it from you.

got the motor in the crx, and a bunch of shit hooked up, plan on geting more shit done, and starting on my manifold and downpipe next weekend. ill post up pics this week, have to barrow a camera.

bigdaddyvtec · « **Reply #49 on:** May 24, 2010, 01:37:27 AM »

Its all good son... Greddy is gone :yes:

90turboteg · « **Reply #50 on:** May 24, 2010, 02:03:09 AM »

kinda figured it wouldnt last. ive been trying to find those ebc's that that guy was selling on here for a while that were home made. idk what the site was called or how to get one...

was ee-enhanced or somthing. i found a site, but its not the same controler, and the old gay hmt trys to get me to log in to view. so no info so far on how to get one

TheMadScientist · « **Reply #51 on:** May 24, 2010, 09:00:59 AM »

http://ee-enhanced.com/

doesn't look like they sell the ebc v1.0 anymore

90turboteg · « **Reply #52 on:** May 25, 2010, 01:17:49 AM »

Quote from: TheMadScientist on May 24, 2010, 09:00:59 AM

http://ee-enhanced.com/

doesn't look like they sell the ebc v1.0 anymore

thats gay, i want the 100 doller controler, not a 3-400 doller one. fml

90turboteg · « **Reply #53 on:** June 10, 2010, 01:13:12 AM »

well got some pics of the motor being in now, and got the sinktrap all done with my new garret turbo... 57 trim t3/t4 63 ar exhaust.

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

88dx · « **Reply #54 on:** June 10, 2010, 02:01:46 AM »

not bad for a fat nog, I bet you part it out before it runs

90turboteg · « **Reply #55 on:** June 10, 2010, 02:03:21 AM »

na i wont, but ill probably buy a cheeseburger before i buy a wastgate.

RobC · « **Reply #56 on:** June 17, 2010, 02:10:57 AM »

Quote from: 88dx on June 10, 2010, 02:01:46 AM

not bad for a fat nog, I bet you part it out before it runs

thats exactly what i told him. lol

Joseph Davis · « **Reply #57 on:** June 17, 2010, 01:15:58 PM »

How do you think the IC/radiator bit is going to pan out?

Urban Indian · « **Reply #58 on:** June 17, 2010, 02:12:06 PM »

He is being Hotrex'd right now

bigdaddyvtec · « **Reply #59 on:** June 17, 2010, 02:43:20 PM »

Go polish somethin homes!!! LOL....

News:

Poll

what kind of oczc manifold should i make for my setup?

Author Topic: finished pics!!! --90Turbotegs 1g dx crx, dohc d16a1 vitara build (Read 50006 times)