Topic: Tranny rebuild (Read 12405 times)

malichite · « **on:** March 29, 2010, 05:34:22 PM »

Looking at rebuilding my D16 Tranny in the slut. Tired of getting used fucked up trannies and want everything right. Anybody ever buy shit from these guys? Any thoughts on this? Mine current trans works but grinds into 3rd, whines really bad when down shifting blah blah blah. Any thing else I may need?

Also, anybody in the pacNW with some experience want to show a broke nig the ropes on rebuilding a trans?

http://cgi.ebay.com/ebaymotors/Synchrotech-Civic-D16-Bearing-Seal-and-Synchro-KIt_W0QQcmdZViewItemQQhashZitem27a9b70a94QQitemZ170351069844QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1182

Jorsher · « **Reply #1 on:** March 29, 2010, 09:29:07 PM »

Take pictures while you do it and do a write up

malichite · « **Reply #2 on:** March 29, 2010, 09:46:38 PM »

Planned on it ;D

92CXyD · « **Reply #3 on:** March 29, 2010, 10:04:58 PM »

Quote from: malichite on March 29, 2010, 05:34:22 PM

Looking at rebuilding my D16 Tranny in the slut. Tired of getting used fucked up trannies and want everything right. Anybody ever buy shit from these guys? Any thoughts on this? Mine current trans works but grinds into 3rd, whines really bad when down shifting blah blah blah. Any thing else I may need?

Also, anybody in the pacNW with some experience want to show a broke nig the ropes on rebuilding a trans?

http://cgi.ebay.com/ebaymotors/Synchrotech-Civic-D16-Bearing-Seal-and-Synchro-KIt_W0QQcmdZViewItemQQhashZitem27a9b70a94QQitemZ170351069844QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1182

Got their seal kit worked great. All original Honda seals. ;D

1slow91hf · « **Reply #4 on:** March 30, 2010, 11:31:10 AM »

picked up a 3rd gear kit from them a long while back for a YS1 and it was damn nice

malichite · « **Reply #5 on:** March 30, 2010, 12:07:02 PM »

Cool, that was what I was hopping to hear.

MAJORAHOLE · « **Reply #6 on:** March 30, 2010, 01:21:30 PM »

sure your forks are good too?

malichite · « **Reply #7 on:** March 30, 2010, 01:34:06 PM »

The one I am rebuilding is Hydro. I have a few spare cables kicking around I can rob parts from. Are they interchangeable?

MAJORAHOLE · « **Reply #8 on:** March 30, 2010, 02:09:54 PM »

the shift forks? not sure, check the part numbers on majestics site and see if they are the same.

Random Hero · « **Reply #9 on:** April 02, 2010, 02:25:58 AM »

I have a good z6 gearset if you want it you can have it, I'm located in Auburn WA.

Input shaft bearing took a shit, you can have everything if you want to change the bearing. FREE

Came out of a del sol with 170k something miles.

crttaz · « **Reply #10 on:** April 02, 2010, 04:29:17 AM »

88-91 shift forks are NLA, aka No Longer Available

3-4 shift forks from 88-91 will NOT interchange with 92-95/

I have ONE customer who I've not heard where I installed a 92-95 1-2 shift fork into a 88-91 CRX Si tranny.

No Gnu's is good Gnu's!

Gary Gnu

chris · « **Reply #11 on:** April 02, 2010, 04:51:27 AM »

Hondabond. Also powerwash your case and clean up the magnet well before re assembly.

I would also recommend powerwashing the transmission before you even crack the case. Purple power and 5 bucks at the diy car wash should get majority of the nasty stuff off.

widebody93 · « **Reply #12 on:** April 04, 2010, 11:27:02 PM »

syncrotech=gearspeed?

malichite · « **Reply #13 on:** April 05, 2010, 12:09:30 AM »

Quote from: Random Hero on April 02, 2010, 02:25:58 AM

I have a good z6 gearset if you want it you can have it, I'm located in Auburn WA.

Input shaft bearing took a shit, you can have everything if you want to change the bearing. FREE

Came out of a del sol with 170k something miles.

Shit, I just came through auburn today. I will gladly take it off your hands. I will get with you in PM for directions, contact crap.

Thanks everyone else for the advice. I ordered that setup last week and will report back on it when I am done along with a right up of the rebuild..

jagojon3 · « **Reply #14 on:** April 05, 2010, 12:17:41 AM »

Quote from: widebody93 on April 04, 2010, 11:27:02 PM

syncrotech=gearspeed?

stfu snitchnig

crttaz · « **Reply #15 on:** April 05, 2010, 01:34:31 AM »

Quote from: widebody93 on April 04, 2010, 11:27:02 PM

syncrotech=gearspeed?

STFUS and GTFO

Eggylshatch · « **Reply #16 on:** April 05, 2010, 01:16:32 PM »

buy a couple quarts of penzoil syncromesh for when you're done. they sell it at autozone, and other places I'm sure. shits da bomb yo

malichite · « **Reply #17 on:** April 05, 2010, 01:22:00 PM »

Quote from: Eggylshatch on April 05, 2010, 01:16:32 PM

buy a couple quarts of penzoil syncromesh for when you're done. they sell it at autozone, and other places I'm sure. shits da bomb yo

Will do. I also have an old case I am getting cleaned up right now before the rest of the stuff shows up. Make it look minty fresh

ratcityrex · « **Reply #18 on:** April 05, 2010, 01:46:28 PM »

FUCK SYNCOR MESHX 10W-30 $ LiFE11

jagojon3 · « **Reply #19 on:** April 05, 2010, 02:00:16 PM »

Nothin but 10W30 here

crttaz · « **Reply #20 on:** April 05, 2010, 05:03:16 PM »

5w30 synchropiss or 10w30 supertech?

?

Wally World for the 10w30!

Random Hero · « **Reply #21 on:** April 05, 2010, 08:19:35 PM »

i put the purp in the tranny too. or oem MTF

92CXyD · « **Reply #22 on:** April 05, 2010, 09:29:05 PM »

Quote from: Random Hero on April 05, 2010, 08:19:35 PM

i put the purp in the tranny too. or oem MTF

+1 shifts great, better than just 10w30.

ratcityrex · « **Reply #23 on:** April 05, 2010, 10:42:12 PM »

Quote from: 92CXyD on April 05, 2010, 09:29:05 PM

Quote from: Random Hero on April 05, 2010, 08:19:35 PM
i put the purp in the tranny too. or oem MTF

+1 shifts great, better than just 10w30.

SHit grinds ether way for me, But It dosent grind as bad when I put in regular old 10w-30.

chris · « **Reply #24 on:** April 05, 2010, 10:44:40 PM »

supertech oil for me

malichite · « **Reply #25 on:** April 05, 2010, 10:57:21 PM »

This shit is all going to be brand new. Better not be any fucking grinding, even if I just fill it with fucking piss.

Eggylshatch · « **Reply #26 on:** April 05, 2010, 10:59:01 PM »

Quote from: chris M on April 05, 2010, 10:44:40 PM

supertech oil for me

I use that for my engine usually, unless theres a sweet sale on something else. I just read a lot back in the day about how the gm syncromesh shit was supposed to be the best, and the penzoil stuff was the same shit but in a much less expensive bottle. I don't really know if it's any better than good ole 10w30, I just paid the extra couple bucks for piece of mind.

crttaz · « **Reply #27 on:** April 05, 2010, 11:26:33 PM »

Likely all my SCCA trannys will be changing fluid AWAY from Synchromesh.

The test will be at IT Fest in the heat of summer.

onlyflash944 · « **Reply #28 on:** April 05, 2010, 11:36:30 PM »

Quote from: crttaz on April 05, 2010, 11:26:33 PM

Likely all my SCCA trannys will be changing fluid AWAY from Synchromesh.

The test will be at IT Fest in the heat of summer.

what will you be switching to?

Random Hero · « **Reply #29 on:** April 05, 2010, 11:36:56 PM »

the purp!

News:

Author Topic: Tranny rebuild (Read 12405 times)

chris

chris