:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: [1]   Go Down

Author Topic: HELP wiring iacv to ecu  (Read 4649 times)

jhonda

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 384
  • BOATS-n-HOES
HELP wiring iacv to ecu
« on: April 10, 2010, 10:33:02 PM »
ok so i bought a 91 civic hatch the guy put a d16z6 in it and did a p28 ecu with a jumper harness to make it obd1 but some stuff it looks like u have to wire urself... he had a mess going on and the cars idle was going up - down non stop from around 1400 - 1500 rpm at idle. so with the car running i unpluged the map and tps and iiacv and it made it start to idle normal but doing this it still would idle crazy until it warmed up.. so i gotta figure out whats going on with the wiring but for now any one know how to wire up the iacv straight to the p28 ecu ? i found the pinout spot on the ecu but their is two wires for this sensor and only one spot on the ecu sooo any help??? OH -- also the radiator overflow after the car warms up fluid starts comming from the overflow idk y?? but car doesnt smoke and engine sounds good just a few problems i gotta fix... thanks homies................ :noel:
Logged
stock b20-vtec + 342hp 247wtq = NO TRACTION

chris

  • Guest
Re: HELP wiring iacv to ecu
« Reply #1 on: April 10, 2010, 11:01:47 PM »
fix the staph code on the vtec side
Logged

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: HELP wiring iacv to ecu
« Reply #2 on: April 10, 2010, 11:12:29 PM »
Blown headgasket. I will give you $450 for the carb if u part itl out
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

chris

  • Guest
Re: HELP wiring iacv to ecu
« Reply #3 on: April 10, 2010, 11:17:26 PM »
Logged

jhonda

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 384
  • BOATS-n-HOES
Re: HELP wiring iacv to ecu
« Reply #4 on: April 11, 2010, 12:49:18 PM »
lol & the link had no effect on me ..... im hooked on something else...... :noel:
Logged
stock b20-vtec + 342hp 247wtq = NO TRACTION

chris

  • Guest
Re: HELP wiring iacv to ecu
« Reply #5 on: April 11, 2010, 04:46:39 PM »
staph and bad ink
Logged

widebody93

  • Snitch Nigger Deluxe
  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 351
  • Widebody93
Re: HELP wiring iacv to ecu
« Reply #6 on: April 11, 2010, 06:28:06 PM »
Quote from: jhonda on April 11, 2010, 12:49:18 PM
lol & the link had no effect on me ..... im hooked on bitches and hoes...... :noel:
Possibly one is a ground on the IACV
Logged

If am a ever retarded enough to get hitched (2x) I would either drink myself to death at my wedding or die trying.
Pages: [1]   Go Up
« previous next »