Topic: Plaid engine bay (Read 14336 times)

malichite · « **on:** April 12, 2010, 03:36:11 PM »

When homos, and hondas run into VWs you get

highroller54 · « **Reply #1 on:** April 12, 2010, 03:38:57 PM »

Thats my car, you dont like it?

chris · « **Reply #2 on:** April 12, 2010, 03:44:32 PM »

Im sad

ochoa · « **Reply #3 on:** April 12, 2010, 03:46:09 PM »

All luxioury models should come like this with a rusted hood to protect it

PhilStubbs · « **Reply #4 on:** April 12, 2010, 06:47:00 PM »

gotta be that chase bays guy. have you seen his site?

malichite · « **Reply #5 on:** April 12, 2010, 06:49:56 PM »

It's sad that his work is such top notch, but he has sucombed to such gayness as the plaid.

shadow · « **Reply #6 on:** April 12, 2010, 06:51:34 PM »

found the matching purse

Ravage70 · « **Reply #7 on:** April 12, 2010, 06:55:46 PM »

Its that stupid scarf pattern every bitch I see wears.

Towdogg · « **Reply #8 on:** April 12, 2010, 07:03:49 PM »

chris · « **Reply #9 on:** April 12, 2010, 07:49:30 PM »

Copied all rywire stuff. Wire tucks are gay no matter how you try to go around it.

Its a trendy thing to do. Function of a vehicle never goes out of style. Plaid engine bays,wiretucks and rusted hoods have a couple years then will become a thing of the past.

weirtech · « **Reply #10 on:** April 12, 2010, 07:56:50 PM »

yeah, i wish i hadn't done some things to my car in the 13 years i've owned it... this would never be one of them though.

jagojon3 · « **Reply #11 on:** April 12, 2010, 07:59:19 PM »

Wires always work better when you can see them

buk9tp · « **Reply #12 on:** April 12, 2010, 08:02:50 PM »

Fuck you, Jon.

hatchboy · « **Reply #13 on:** April 12, 2010, 08:10:52 PM »

DURKA DURKA MUHAMMAD JIHAD FUCK YOU!

chris · « **Reply #14 on:** April 12, 2010, 08:11:30 PM »

Quote from: jagojon3 on April 12, 2010, 07:59:19 PM

Wires always work better when you can see them

ratcityrex · « **Reply #15 on:** April 12, 2010, 08:24:21 PM »

Truth, I did a wire tuck on my car, and said I will never do again. To much time, and a waste at that. If I was to ever do anything with wiring, It would be to get rid of all of the useless shit, and rewire it all with better routes. But keep it all accessible.

chris · « **Reply #16 on:** April 12, 2010, 08:26:59 PM »

Quote from: n/a michael on April 12, 2010, 07:57:36 PM

Quote from: chris M on April 12, 2010, 07:49:30 PM
Copied all rywire stuff. Wire tucks are gay no matter how you try to go around it.

Its a trendy thing to do. Function of a vehicle never goes out of style. Plaid engine bays,wiretucks and rusted hoods have a couple years then will become a thing of the past.
wire tucks have been around for a long time on muscle cars. infact the only car i'd ever do a wire tuck on is an old muscle car.

Your point half the supposed hot RODS run 15's at best and are all CHROMEZ. Just as bad.

If the car doesnt see the track fuck it. Flames are for fags

michigan_soler · « **Reply #17 on:** April 12, 2010, 08:29:23 PM »

All I really know about xhase is he started doing wire tucks when he was 15 and his ex is hot. Ill post a pic when I get on a comp and off my phone

PhilStubbs · « **Reply #18 on:** April 12, 2010, 09:08:15 PM »

nut swing much?

chris · « **Reply #19 on:** April 12, 2010, 09:41:06 PM »

and he cant actually work on a car besides doing a penis tuck

TunerToys · « **Reply #20 on:** April 12, 2010, 10:19:51 PM »

That pattern is the background image on his site. Sad.

HiProfile · « **Reply #21 on:** April 13, 2010, 12:44:20 AM »

Damn, that's the wall paper my parents put in their kitchen in 1983.

Like I tell every ricer - just because you can stick a dildo on a Honda and it's uncommon, does not make it a good idea. Same for this crap. I'm honestly surprised ricers don't put a solid flat plate over the firewall like they do on old hot rods.

Doug · « **Reply #22 on:** April 13, 2010, 02:28:06 AM »

Quote from: chris M on April 12, 2010, 07:49:30 PM

Copied all rywire stuff.

Yeah Ryan gave him a job and a place to stay and then dipshit goes and fucks Ryan over. Seems like people are too stupid to realize when they have a sure thing.

colt45 · « **Reply #23 on:** April 13, 2010, 03:35:16 AM »

Quote from: chris M on April 12, 2010, 07:49:30 PM

Copied all rywire stuff. Wire tucks are gay no matter how you try to go around it.

Its a trendy thing to do. Function of a vehicle never goes out of style. Plaid engine bays,wiretucks and rusted hoods have a couple years then will become a thing of the past.

thank god. im still waiting for the super-homo "key chain on the the rear tow hook" fad to go away.

chris · « **Reply #24 on:** April 13, 2010, 03:41:24 AM »

I would rather see wings on cars than this shit. A wing on the correct vehicle has function. This is just a sign of a closet gay.

Doug · « **Reply #25 on:** April 13, 2010, 04:32:34 AM »

We should come up with a new fad that we all agree is gayer than N/A Mikes post dick chick and then see how fast we can spread it

PhilStubbs · « **Reply #26 on:** April 13, 2010, 07:18:46 AM »

i say put big panda stickers on the side mirrors but only on the glass. then it covers up the glass so they are useless, but im sure homos will think its cool.

jeffsciv23 · « **Reply #27 on:** April 13, 2010, 06:33:42 PM »

damn HT gayness, chase gays is a fag

chris · « **Reply #28 on:** April 13, 2010, 08:35:52 PM »

muscle cars=99 percent of the time loud/beat up motored cars that will get there ass handed to them by a 13 sec street car.

ApexSilver06MR · « **Reply #29 on:** April 13, 2010, 08:39:20 PM »

Quote from: chris M on April 13, 2010, 08:35:52 PM

muscle cars=99 percent of the time loud/beat up motored cars that will get there ass handed to them by a 13 sec street car.

get smoked on sacramento back roads by another no spool crx...

News:

Author Topic: Plaid engine bay (Read 14336 times)

chris

chris

chris

chris

chris

chris

chris