Topic: made my 3inc exhaust (Read 17615 times)

walter · « **on:** May 26, 2010, 06:29:48 PM »

it's done.

ill make another better manifold + 3" downppe soon.

2.5 vs 3

first start up with Z6 head

http://videos.streetfire.net/video/http://www.streetfire.net/video/3inch-exhaust_2016464.htm.htm

im having a problem with rattling heat shield but ill try to fit it by tomorrow
http://www.realhomemadeturbo.com/forum/index.php?topic=14164.msg162078#new

ratcityrex · « **Reply #1 on:** May 26, 2010, 06:47:05 PM »

looks good, but your link of the video dosent work

narfdanarf · « **Reply #2 on:** May 26, 2010, 06:56:37 PM »

$BALLIN$

highroller54 · « **Reply #3 on:** May 26, 2010, 07:18:37 PM »

Walter loves euro cock.

walter · « **Reply #4 on:** May 26, 2010, 07:25:10 PM »

you loves mine :yes:

runsfromdacops · « **Reply #5 on:** May 26, 2010, 08:17:38 PM »

thats way to ballin to be on here, take that shit to ht.

weirtech · « **Reply #6 on:** May 26, 2010, 08:38:45 PM »

nice work walter. my only concern is the hangers. instead of just butt welding them to the pipe, you'd be better off to wrap them under the pipe, or even along the side instead of pointing straight into it.

walter · « **Reply #7 on:** May 26, 2010, 08:40:39 PM »

this time, i did want a good exhaust.. anyway thx

walter · « **Reply #8 on:** May 26, 2010, 08:41:24 PM »

Quote from: weirtech on May 26, 2010, 08:38:45 PM

nice work walter. my only concern is the hangers. instead of just butt welding them to the pipe, you'd be better off to wrap them under the pipe, or even along the side instead of pointing straight into it.

i know, but i really havent a garage for to make it, everything i do in the street, and i weld in my room.. $:-\$

TheMadScientist · « **Reply #9 on:** May 26, 2010, 10:05:57 PM »

Quote from: walter on May 26, 2010, 08:41:24 PM

i know, but i really havent a garage for to make it, everything i do in the street, and i weld in my room.. $:-\$

THAT IS HARDCORE!

PhilStubbs · « **Reply #10 on:** May 26, 2010, 10:09:18 PM »

That's a damn nice exhaust, then throw in welding in a house. Baller as shit

BenDover · « **Reply #11 on:** May 26, 2010, 11:20:35 PM »

what machine you got?

walter · « **Reply #12 on:** May 27, 2010, 04:23:32 AM »

about the hangers i only made the two rears, i didnt make the two that goes in the middle (so far), when i make the mani and new downp ill make them, they hangs very tight because the rods are too wide and i even had to wear for to fit with rubbers and it's tight, ill add too a flex pipe.

yes, i weld in my room, i only have like 2square meters( i think it's like 20-21 foot square meter), for make everything, everrytime is a pain because i have not enough room for make it good but i can get it.

and i cut the tubing in the kitchen. my tig is the newest i got frmo Germany, i posted it ago a long time already.

thanks dudes!

ktown powder coating · « **Reply #13 on:** May 27, 2010, 05:44:33 AM »

nice work... I love that you weld in your room. LOL

weirtech · « **Reply #14 on:** May 27, 2010, 10:09:45 AM »

do you use a cutting board in the kitchen? don't want to scratch that counter top... that is awesome.

walter · « **Reply #15 on:** May 27, 2010, 10:15:35 AM »

yup, i hate it but i hope end of this year i can open my own shop .

here a pic what i means

i think, nobody can make the works i do , i think, it's pretty difficult to make without not enough room and with not good tools..

i even rebuilt my engine in my room. i have pics too but well, looking the pic you will imagine it .

onlyflash944 · « **Reply #16 on:** May 27, 2010, 12:05:50 PM »

i can see building an engine in your room, it's semi clean, and climate controlled

welding? thats fucking nuts man. good thing you tig and not fluxcore or stick

ratcityrex · « **Reply #17 on:** May 27, 2010, 12:37:06 PM »

LOL @ welding in your room.....

I would Be setting shit on fire....lol

I set shit on fire in my garage when I weld, let alone in my house...lol

+1 Intnetz!!

crxvtec91 · « **Reply #18 on:** May 27, 2010, 06:55:22 PM »

Walter your the man!

j.h.christ · « **Reply #19 on:** May 28, 2010, 01:10:32 AM »

Quote from: n/a michael on May 27, 2010, 05:21:17 PM

yeah i set shit on fire in my mom's garage too

fixed

walter · « **Reply #20 on:** May 28, 2010, 03:26:57 AM »

Quote from: onlyflash944 on May 27, 2010, 12:05:50 PM

i can see building an engine in your room, it's semi clean, and climate controlled

welding? thats fucking nuts man. good thing you tig and not fluxcore or stick

sure, because if i would weld with MIG or Flux , i'd be died right now :yes:

keelay · « **Reply #21 on:** May 28, 2010, 09:58:16 PM »

Quote from: n/a michael on May 27, 2010, 05:21:17 PM

yeah i set shit on fire in my Mom's basement

Fix'd better

Walter, you english is readable, and you are a cool mother fucker. Did you figure out which direction to go about fixing that heat shield?

walter · « **Reply #22 on:** May 29, 2010, 06:13:10 AM »

hi, yeah, i tried to lower a bit the exhaust and it rattle when engine is very lean, i have to tune it, when engine is tune im sure exhaust will not rattle anymore. just im having problems for to datalog with crome.

keelay · « **Reply #23 on:** May 31, 2010, 04:15:17 PM »

Ah, ok, so it's an detonation induced rattle? Sounds kind of odd...but I'll take your word for it. Good luck with it, my rattling exhaust drives me fucking crazy, to the point I almost loathe driving my car.

walter · « **Reply #24 on:** May 31, 2010, 06:17:50 PM »

ill make more vids when i get this shit crome working and after street tune it , make another vid of how sounds it.

PhilStubbs · « **Reply #25 on:** May 31, 2010, 08:15:41 PM »

Did you pay for Crome? You can't log with free Crome.

walter · « **Reply #26 on:** May 31, 2010, 08:40:12 PM »

Quote from: SecksyPeePee on May 31, 2010, 08:15:41 PM

Did you pay for Crome? You can't log with free Crome.

using crome pro 1.5 $:-\$

PhilStubbs · « **Reply #27 on:** May 31, 2010, 08:58:45 PM »

97Econobox · « **Reply #28 on:** June 02, 2010, 10:20:36 AM »

Bad ass dude.

walter · « **Reply #29 on:** June 04, 2010, 05:36:57 AM »

thanks! im waitng for some flanges for make another exhaust one!

News:

Author Topic: made my 3inc exhaust (Read 17615 times)