:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: where to get 1.5" / 38mm v band sets?  (Read 8783 times)

7808

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2513
where to get 1.5" / 38mm v band sets?
« on: July 16, 2010, 05:20:21 PM »
anyone know where to get 1.5"/38mm v band sets ? think i only seen them one place and they were stupid expensive..  didnt think these were so hard to come by
Logged

7808

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2513
Re: where to get 1.5" / 38mm v band sets?
« Reply #1 on: July 16, 2010, 05:34:54 PM »
Logged

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: where to get 1.5" / 38mm v band sets?
« Reply #2 on: July 16, 2010, 05:40:01 PM »
Quote from: 7808 on July 16, 2010, 05:34:54 PM
anyone tried these http://cgi.ebay.com/ebaymotors/SUPERTRAPP-T-BOLT-CLAMP-EXHAUST-STAINLESS-1-5-/130401688165?cmd=ViewItem&pt=Motorcycles_Parts_Accessories&hash=item1e5c8bda65  seems like its too narrow to hold 2 pipes together for shit

What are you trying to do? that is a t bolt clap not a v band clamp?
Logged

7808

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2513
Re: where to get 1.5" / 38mm v band sets?
« Reply #3 on: July 16, 2010, 07:43:25 PM »
i know the difference, im trying to connect to piipes and not using normal flanges
Logged

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: where to get 1.5" / 38mm v band sets?
« Reply #4 on: July 16, 2010, 07:45:13 PM »
Quote from: 7808 on July 16, 2010, 07:43:25 PM
i know the difference, im trying to connect to piipes and not using normal flanges

Why not use a normal flange? trying to find a 1.5" v-band will be tough. you could do slip fit but someone would need to know the part and it's usable to know if a slip fit joint would work. so idk what to tell ya.
Logged

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: where to get 1.5" / 38mm v band sets?
« Reply #5 on: July 17, 2010, 12:08:39 AM »
buy cheap 2 inch v band kit

cut 2 pieces of 16gauge sheet metal into 2x2 squares.

drill/dremel 1.5 in holes in sheet metal

weld flanges to each square

weld square to wastegate tubes

profit





extra credit, grind the edges of the sheet metal down to the flanges for that finished look
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

ghettoturbo

  • Dedicated Xenocron minion
  • Full Member
  • ***
  • Offline Offline
  • Posts: 151
  • .
Re: where to get 1.5" / 38mm v band sets?
« Reply #6 on: July 17, 2010, 01:43:32 PM »
Quote from: 7808 on July 16, 2010, 05:34:54 PM
anyone tried these http://cgi.ebay.com/ebaymotors/SUPERTRAPP-T-BOLT-CLAMP-EXHAUST-STAINLESS-1-5-/130401688165?cmd=ViewItem&pt=Motorcycles_Parts_Accessories&hash=item1e5c8bda65  seems like its too narrow to hold 2 pipes together for shit

Thats meant to go over a slip joint, not to hold two pieces butted together.


-Jay
Logged

7808

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2513
Re: where to get 1.5" / 38mm v band sets?
« Reply #7 on: July 17, 2010, 03:58:38 PM »
the pipes (2) go along the frame of a motorcycle so i dont have room for any bulky flange, i can do a butt or slip whatever i need to when i find a good cheap way to connect them besides welding them.  might just do slip fits with hooks and tension springs

 i need to seperate them before a 2 into 1  merge to remove them ever
Logged

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: where to get 1.5" / 38mm v band sets?
« Reply #8 on: July 17, 2010, 05:33:33 PM »
Quote from: 7808 on July 17, 2010, 03:58:38 PM
...might just do slip fits with hooks and tension springs...

This.
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: where to get 1.5" / 38mm v band sets?
« Reply #9 on: July 17, 2010, 08:19:56 PM »
Quote from: dvst8r on July 17, 2010, 05:33:33 PM
Quote from: 7808 on July 17, 2010, 03:58:38 PM
...might just do slip fits with hooks and tension springs...

This.

Agreed
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: where to get 1.5" / 38mm v band sets?
« Reply #10 on: July 18, 2010, 12:04:10 AM »
Unless your pipes overlap, you're really SOL if you can't do any welding. A slip fitting is one pipe fitting over another very tightly, with a clamp that either deforms the outter pipe or squeezes a very tight fit just enough to create a lot of friction. You'd have to look at exhaust clamps for this though. A normal t-bolt won't be able to create the clamping force to do shit. Those clamps that are a the shape of an Omega greek letter are what you need, but they aren't cheap either. They're only for ~14ga steel max.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

7808

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2513
Re: where to get 1.5" / 38mm v band sets?
« Reply #11 on: July 18, 2010, 11:01:14 PM »
i tack'd a 1 5/8  ID to 1 5/8 OD exhaust adapter to each pipe so they slip over nice so maybe i will check out those fancy clamps if i dont use springs, i dont want to use U bolts ive done that before and i dont like they way they crimp the pipe if you actually tighten them down enough to stay on
Logged
Pages: [1]   Go Up
« previous next »