Topic: Just heard that my buddy's white EG ran 9's (Read 8017 times)

ApexSilver06MR · « **on:** September 07, 2010, 05:35:59 PM »

Minnesota's Fastest TURBO Civic EG's 9 sec - Team Brooklyn

from minnesota but here out in Cali

I make keys for him and his dad

Urban Indian · « **Reply #1 on:** September 07, 2010, 05:50:00 PM »

specs on this thing?

Geez's I need to get a combo that works for more than a few days together

chris · « **Reply #2 on:** September 07, 2010, 05:52:00 PM »

Didnt your stock ls hold together for awhile?

Urban Indian · « **Reply #3 on:** September 07, 2010, 05:58:33 PM »

yeah that thing held together for a whole year of abuse. I'm actually surprised it did aswell as it did. Overrevving it by like 1000-1500rpm all the time 15 psi.

But I was bored of that after a month. I have been contemplating going to a stock ITR cam or regrind my pro1's to something a little less aggressive and AT LEAST stock cam gears for this next one. I'll prob lose the power level I was shooting for but I figure it will at least hold together this time.

bigdaddyvtec · « **Reply #4 on:** September 07, 2010, 06:00:57 PM »

Quote from: Urban Indian on September 07, 2010, 05:50:00 PM

specs on this thing?

Geez's I need to get a combo that works for more than a few days together

Its not rocket science to make 7-800 on a B... And surely you cant expect it to last forever, but you my lil buddy have really bad luck.

Basic 84mm with eagles and any 9:1 with a valvetrain should ... SHOULD reliably make the power your after....

ratcityrex · « **Reply #5 on:** September 07, 2010, 06:06:09 PM »

Quote from: bigdaddyvtec on September 07, 2010, 06:00:57 PM

Quote from: Urban Indian on September 07, 2010, 05:50:00 PM
specs on this thing?
Geez's I need to get a combo that works for more than a few days together

Its not rocket science to make 7-800 on a B... And surely you cant expect it to last forever, but you my lil buddy have really bad luck.
Basic 84mm with eagles and any 9:1 with a valvetrain should ... SHOULD reliably make the power your after....

The transmission on the other hand is another story.....lol

ApexSilver06MR · « **Reply #6 on:** September 07, 2010, 06:07:47 PM »

i must say. spiker really loves pulling those TRANNY'S

bigdaddyvtec · « **Reply #7 on:** September 07, 2010, 06:10:37 PM »

LEvi has a long way to go to claim tranny queen thats for sure.. He need to make power long ennough to break some shit LOL...

Get busy my Feather not dot french canadian little buddy

ratcityrex · « **Reply #8 on:** September 07, 2010, 06:15:14 PM »

That eg is moving pretty good though. Levi, your ls setup was sick. It was baller parts on a junkyard motor. You should do another budget build like that. One that runs for more than a weekend/month.

Urban Indian · « **Reply #9 on:** September 07, 2010, 06:17:48 PM »

I had contemplated putting together another junkyard build for another car with a tiny turbo for the local autoX circuit.

I will see if I hit the lottery this November like I was told. Either way I'll be putting my car together this winter.

I'll run my 500/300 hp/tq combo for the street with the occasional race weekend Q16 day.

ratcityrex · « **Reply #10 on:** September 07, 2010, 06:20:57 PM »

Just do a sleeved block and some good parts and call it a day. No need to do anything ground breaking. Fuck man just put down some good numbers and have fun. Then worry about breaking huge numbers.

bigdaddyvtec · « **Reply #11 on:** September 07, 2010, 06:49:00 PM »

Sleeved block, Eagles CPs, DITCH those fucking cams and get some CTR cams... STOCK cam gears... Big ass turbo, make 7 and be happy...

Dont worry youll still have trans fail to de3al with

flat_black · « **Reply #12 on:** September 07, 2010, 07:32:12 PM »

get yours out yet tubby?

bigdaddyvtec · « **Reply #13 on:** September 07, 2010, 07:45:23 PM »

You get YOURS out yet homo?

LS1pwNzJ00 · « **Reply #14 on:** September 07, 2010, 09:43:47 PM »

Quote from: bigdaddyvtec on September 07, 2010, 06:10:37 PM

LEvi has a long way to go to claim tranny queen thats for sure.. He need to make power long ennough to break some shit LOL...

Get busy my Feather not dot french canadian little buddy

Dont hate on levi, hes broken plenty of stuff, but not the stuff you'd be proud of $:-\$

Urban Indian · « **Reply #15 on:** September 07, 2010, 10:18:44 PM »

I'll just pick up another piston. And a new block

Stealthmode · « **Reply #16 on:** September 07, 2010, 11:04:56 PM »

I was there. Never heard of them, but team Brooklyn was out in force. Heard something about them being from CA, and thought, "WTF are they doing in MN?".

I remember seeing a hatch that looked like a 9 second car, but then the more street looking white one did it.

bigdaddyvtec · « **Reply #17 on:** September 07, 2010, 11:07:33 PM »

Quote from: Urban Indian on September 07, 2010, 10:18:44 PM

I'll just pick up another piston. And a new block

Ya, Let me know how that works out for you.... You never listen. Good dog. Ignore.

ApexSilver06MR · « **Reply #18 on:** September 07, 2010, 11:25:40 PM »

Quote from: Stealthmode on September 07, 2010, 11:04:56 PM

I was there. Never heard of them, but team Brooklyn was out in force. Heard something about them being from CA, and thought, "WTF are they doing in MN?".

I remember seeing a hatch that looked like a 9 second car, but then the more street looking white one did it.

Steve is from Sac but raised in MN. recently went back to sac 2 years ago. hes still b ack and forth.

HiProfile · « **Reply #19 on:** September 08, 2010, 12:14:57 AM »

Quote from: ApexSilver06MR on September 07, 2010, 05:35:59 PM

I make keys for him and his dad

So that's how he funds his racing.

News:

Author Topic: Just heard that my buddy's white EG ran 9's (Read 8017 times)

chris